Full Answer
How to choose the right wattage for your CBD vape oil?
There are many factors to consider when thinking about wattages, such as the quality of the CBD, the actual vape oil kits, the vape oil taste, and many others. This article is intended to clarify all about it. When you are vaping CBD, it is essential to keep in mind that you don’t want to crank it up to a higher wattage very high.
Can I vape while my Cool Fire is charging?
If, like me, you’re always forgetting to charge your battery until the last minute, you can also vape while it charges using its passthrough capability. By locating the micro USB port on the side of the device, it allows you to stand the Cool Fire upright while it’s charging.
What happens when you increase the wattage on a vape cartridge?
When you increase your wattage settings, you are making the cotton or ceramic coil over-heat. As they become heated the ceramic or cotton coils tend to burn the CBD. So, in other words, you have the coil in the cartridge burn the oil at a much faster rate.
Can You vape CBD oil?
Because you are vaping at a low wattage you will not blow fat vape clouds like you would with a nicotine vape. So, when vaping CBD, you will enjoy the experience, get the health benefits of CBD, but you will not exhale large vape clouds.
How do I change my cool fire 4 to Watts?
The Cool Fire IV allows you to switch between variable voltage and variable wattage mode. To switch to wattage mode hold the power button and the plus button together. Similarly, to switch to voltage mode hold the power button and the minus button together.
What is the best tank for cool fire IV?
Compatibility. The CoolFire IV vapes perfectly with the Innokin iSub Apex & iSub-G Sub Ohm tanks.
How do you use CoolFire IV?
12:1217:46Cool Fire IV By Innokin - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut in the ice-sub. And try it out. Alright so once you click it. Shows you point four seven pointMorePut in the ice-sub. And try it out. Alright so once you click it. Shows you point four seven point four seven ohms close to 0.5. Alright. And it goes up you don't press it.
How do I change my cool fire IV TC100?
The CoolFireIV TC100 wattage can be adjusted from 6.0 to 100 watts in . 5 watt increments by pressing and holding the “+” or “-” button. Hold the button down to quickly increase or decrease the set wattage. If the wattage is decreased below 6 Watts it will cycle up to 100 Watts.
What is CoolFire IV?
Description. The Cool Fire IV Vape Mod with 40W of vaping power, the CoolFire IV fires a full range of tank resistances and each is made with the highest quality materials to create a vaporizer that you can rely on! The compact power, bright OLED display, long lasting battery capacity and easy to use menu system.
How do you change the wattage on a coolfire Ultra?
1:112:25Innokin Coolfire Ultra Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour up or down your hold in either the up or down for a second until it flashes. And then you canMoreYour up or down your hold in either the up or down for a second until it flashes. And then you can scroll and adjust your wattage.
How do I change the wattage on my innokin?
The Innokin Kroma-A mod features two small buttons just above the USB charging port. To change the wattage on your device, press the up (+) button to increase and the down (-) button to decrease the wattage.
How do I fix the atomizer on my cool fire 4?
A 'Shorted' or 'Check Atomiser' error message means somewhere in the device's connection, the atomiser is causing an electrical short circuit. To resolve the issue, you will need to replace the coil in the tank.
How do I change my innokin settings?
Should you wish to change the setting, hold either the "+ or -" button for a few seconds until the current power setting starts flashing then let go. Once the display is flashing, you can increase or decrease the setting as required. The display will cycle from 6.0W to 40.0W (in 0.5 steps).
How do I change my innokin Kroma settings?
2:484:14Innokin iTaste Kroma A Zenith Kit Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold your finger on the plus or minus button at the bottom of the device. And your wattage shouldMoreHold your finger on the plus or minus button at the bottom of the device. And your wattage should begin to flash. Once flashing you can adjust your wattage in increments of 0.5.
How do you change an innokin coil?
To change the coil, hold your tank upside-down and unscrew the airflow adjustment ring to gain access to the coil. Next, simply grab the coil by the threads and yank it out. Take the new coil and before you insert it into the tank, prime it first. Pour 4-5 drops of juice into the coil, then slide it into the tank.
What is the Innokin Coolfire IV Plus?
We take a look at the brand new Innokin Coolfire IV box mod. The Coolfire IV Plus is an upgraded version of the popular Innokin Coolfire IV mod. The new Coolfire IV Plus is marginally thicker and heavier than the original, but therefore boasts a larger battery capacity, higher max wattage and can fire down to a lower resistance. The Coolfire IV Plus has a nice 3300mAh battery vs the 2000mAh on the original. The Plus now has a max wattage of 70W, up from 40W on the original. Lastly you can now fire down to 0.1ohm on the Plus, whereas the original could only go down to 0.3ohm. In a market where higher power and lower resistances has become quite mainstream, the Coolfire IV Plus boasts some much needed improvements. The Coolfire IV Plus does not have temperature control, so if you are looking for that, you will need to look at Innokin’s new Cortex mod instead.
Is the Innokin Coolfire Plus chubby?
Whilst the new Coolfire Plus is slightly chubbier than the original, Innokin have managed to somehow make it look even sleeker. The one we have in Black, looks really nice and it sits really nicely in the hand whilst vaping.
Does Coolfire IV Plus have temperature control?
The Coolfire IV Plus does not feature temperature control, but I can still see it appealing to a lot of vapers who are looking for a mod in this wattage range. It is a great looking and well built box mod and I can see it being very popular with beginner to intermediate type vapers.
Is Coolfire 4 a good mod?
The CoolFire 4 has a completely different design to its predecessor. It’s less bulky, more stylish and has a great appearance. Its plain design is smart and makes it a versatile mod to have. The CoolFire logo is pressed into the bottom right corner in a great position that fits well with the design.
Is Innokin Coolfire 4 good?
For me, the Innokin CoolFire 4 is a breath of fresh air. It is a hugely enjoyable mod and provides one of the best vaping experiences I have ever had at this price range. The design is vastly superior to most of its peers, the features are simple and intuitive to use, and it pumps out clouds like nobody’s business once you’ve got the right tank on top. Therefore, if you are brand new to vaping, or just fancy upgrading your pen-vape to a mod, then the CoolFire 4 is EXACTLY what the doctor ordered.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Does a coil last longer with a temperature locked coil?
Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power).
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.