What are these wires used for in vaping?
These wires are basically used to make vape coils. We need to be responsible and learn the uses of and differences between these five because most of them can only be used under specific circumstances. The wrong usage of any of these wires can result in potentially hazardous situations.
Can vape wires pull a double cross?
In fact, this is the only vape wire that can pull a double cross, which makes it very flexible. This component is also very durable and will last a long time so you can keep using the same coils without worrying about changing your wires.
What to look for when buying a vape wire?
You should be looking for a wire that doesn’t change resistance when heated up if you choose to go with variable wattage mode. Temperature Control, or TC vaping, on the other hand, has its own distinct function. This mode lets you freely set the temperature of your choice at which you want your vape to heat up.
Does twisting wire make a difference?
Twisting wire DOES make a difference. For instance, I have done triple twisted 26 gauge compared to 22 gauge wire. They have almost the exact same resistance per inch. In using both to build 0.25 ohm builds, the 22 gauge beat the triple twisted 26 hands down in both flavor and vapor.
How do you twist a vape wire?
0:479:46Twisted 28 Gauge Micro Coil - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to make sure the two ends are even all you're going to do is you're going to manually twistMoreYou want to make sure the two ends are even all you're going to do is you're going to manually twist these two ends together and just get it. Started. Okay just like that. Few more turns.
What vape wire gives the best flavor?
Stainless steel wire heats up faster than kanthal or nichrome and that makes it the go-to wire for vapers seeking a quick and hard draw. Many vapers also swear that stainless steel produces better flavor than kanthal. Stainless steel wire contains nickel so those with a nickel allergy should avoid using it.
Is fused Clapton good for flavor?
A fused Clapton is a thinner gauge wire wrapped around two or more thicker gauge cores. The multiple cores give fused Claptons a faster ramp-up time and arguably better flavor than non-fused Claptons, due to the increase in surface area.
What coil is best for flavor?
The best ones to go for flavour wise are clapton, titanium (if you prefer vaping with TC mode) or an Alien coil. The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
Why can't I taste the flavor in my vape?
Vaping can sometimes cause a dry mouth simply by requiring so much mouth breathing (inhaling a vape), which can dry up saliva. When we don't have enough saliva, the ability to taste is almost non-existent. Flavor fatigue is another culprit behind vape tongue resulting in you not tasting your e-juice.
How many wraps Should a coil have?
How many coil wraps do I need? This depends completely on what type of coil you're building, your target resistance and even how much flavor you want from your coil. We'd usually suggest sticking to around 6 wraps as this will give you a good cross sectional surface area with decent flavor.
What coil is best for clouds?
Opt for low resistance coils: Low resistance coils heat up faster, which means the clouds are bigger. Look for a low AWG number when purchasing a coil. Bigger surface area: Opt for coils that have the biggest surface area possible to achieve the biggest clouds.
Which is better kanthal or Clapton?
Clapton coils are usually made from Kanthal and it's all about the style of the coil winding. Claptons are more complex from the wiring point of view and have a wider area of wiring. As this means more contact with the e-juice, it can also vaporise it better, being more efficient.
Which Clapton coil is best?
List of Best Clapton Coils#1. Dual-core Fused Clapton 0.28 ohms 10 pieces.#2. Dual Core Fused Clapton 0.62 ohm 10 pieces.#3. Dual Core Fused Clapton 0.90 ohm 10 pieces.#4. Dual Core Fused Clapton 0.38 ohm 5 pieces.#5. Quad-core Fused Clapton 0.12 ohms.#6. ... #7. ... #8 Quint core Clapton 5 pieces.More items...•
What is mouth to lung vaping?
With mouth to lung (M2L or MTL) vaping, you inhale the vapour into your mouth first, collect it there, then breathe it fully into your lungs. Smokers will be particularly used to mouth to lung vaping, as it's a similar process to smoking cigarettes.
How can I increase my vape flavor?
ContentsBest Wattage and Temperature Settings For Flavour.Reduce Your Airflow.Choose Your Coil Carefully.Wicking and Coil Materials Matters.Think About VG:PG Ratios.Below-Coil Airflow Boosts Flavour.Choose a Narrower-Bore Drip Tip.Keep Your Wicks, Coils and Tanks Clean.More items...
Why do disposable vapes taste better?
Reasons For Disposables Tasting Better There could be a few reasons why some vapers feel that a disposable vape pen tastes better than a refillable device. This could be due to the cotton wick in disposable vapes being completely saturated in e-liquid for months before purchase.
What are the characteristics of wire?
These are the diameter (or gauge) of the wire, its resistance, and the ramp time of different materials.
What gauge wire is used for Clapton coils?
Some of the most common gauges used for single-strand coil builds are 28, 26, and 24, and thinner wire used in the exterior of Clapton coils is usually between 40 and 32 gauge. There are others of course, and even odd number gauges.
What wires are used for power mode?
Most vapers prefer power mode: it is just simpler. Kanthal, stainless steel, and nichrome are the three most popular power mode wires right now, and you might be wondering what would be the best one for you. Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, ...
What is Kanthal wire?
Kanthal wire is a ferritic iron-chromium-aluminum alloy with good resistance to oxidation. It is commonly used for vaping in straight wattage mode. Kanthal is a great place to start if you are just getting into rebuilding, dripping, etc. It is easy to work with, yet stiff enough to hold its shape when formed into coils—which comes into play during the wicking process. It is extremely popular as a primary wire when building single-wire coils.
What is the difference between a 32 gauge coil and a 24 gauge coil?
When comparing coils with the same ID, number of wraps, and material used, a coil made with 32 gauge wire will be of much higher resistance than a 24 gauge coil. Another factor to take into account when it comes to wire resistance is the internal resistance of the coil material.
Why do you need a TC wire?
Wires suitable for TC are chosen because of their Temperature Coefficient of Resistance (TCR). The TCR of the vaping wire is the increase in resistance of the wire as temperature increases. The mod knows the cold resistance of your coil, and the material you are using.
What is wire gauge?
Wire gauge. The first basic characteristic of any wire is the actual diameter of the wire. It is commonly called the wire “gauge” and expressed as a numerical value. The actual diameter for each wire isn’t really important. What matters is that as the wire gauge number increases, the wire diameter gets smaller.
What are the things to look for when choosing a vape wire?
There are three things way pay attention to when choosing a vape wire – flavor, vapor production, and ramp-up time (how fast the wire heats up). Knowing the properties of each of these wires will give you an opportunity to find one that matches your particular vape style more easily.
What metal is used to make vape wires?
Those materials are: Kanthal (FeCrAl) NiChrome (Ni80) Nickel (Ni200) Stainless Steel (SS) Titanium (Ti) Each of these materials is specific, and vaping with it will produce different results.
What is TCR in vaping?
TCR is a complex calculation that tells the device how to regulate things to keep the resistance of the vape wire steady and even throughout your vape session. The mod delivers short, intermittent pulses of current, making sure that the temperature never exceeds safety limits.
What are the two modes of vaping?
In essence, there are two different modes of vaping – the wattage mode and the temperature control mode. Not every wire can be used in both of these modes! If you try, and you don’t know what you’re doing, you’re risking a battery mishap or, worse yet, poisoning yourself. So, tread carefully!
Why does a 20 gauge wire heat up so slowly?
That’s because the resistance of the wire goes down, meaning that it takes more time to heat up. 20 or 22 gauge (thicker) wires will heat up slowly, but same is true for coils that are made from thinner wires but have multiple strands (exotic coil builds such as the Alien or Clapton).
What is SS wire?
Stainless steel wire is available in a lot of grades (316, 316L, 410, 413, just to name a few) and most of these grades are suitable for use when building vape wires. However, because there are so many options, there’s often confusion as to how good SS really is – that’s because some talk it up, while others hate it with a vengeance. Of course, these people are usually talking about totally different SS wire grades.
What is the TCR of a nickel wire?
Vapers familiar with temperature control mods will remember that nickel was, in fact, the first wire used for it. Its TCR is a nice, round number (0.006) , which means that it’s easy for devices to calculate how much power needs to be applied to it and when to cut it to maintain a safe temperature. With that said, you need to know that nickel should only ever be used with TC. It has a propensity to overheat when used in wattage, which means that it can catch on fire and melt, leaching harmful substances into your vapor.
What is the best wire for vaping?
Kanthal Wire. Kanthal is the OG and the first wire that started it all. This is the most commonly used wire for vaping, and it has been recognized for more than a decade now for producing high quality vape coils, both by amateurs and industry professionals.
How many types of wires are there in vaping?
There are five common types of wires in the vaping industry. These five materials have distinct differences from one another. These differences are based on temperature control mode and wattage mode. One certain wire can even be used in both modes.
What is VW vaping?
Wattage vaping, or VW (which stands for variable wattage) is the standard mode of vaping. This allows you to independently set the wattage at which you want your vape to operate. You should be looking for a wire that doesn’t change resistance when heated up if you choose to go with variable wattage mode.
Why is it important to know about vape coils?
It is very important to be aware of all of this information because every wire behaves differently. This will give you information about how vapes taste separately depending on the wire used.
What gauge wire do vacuum cleaners use?
Gauge, in its definition, is the actual diameter of the wire. Vapers usually use 22, 24, 26, 28, 30, and 32 gau ge wire. The bigger the number of the gauge increases, the thinner the wire gets. For instance, a 24 gauge wire at about 0.02 inches, that is 0.51 mm in diameter, while a 30 gauge wire falls at 0.01 inches, 0.25 mm in diameter.
How hot can a wire be before melting?
This wire can also tolerate very high temperatures of up to a astonishing 1,500 °C before it actually starts melting. This wire is preferable for beginner rebuilders because not only is it easy to use, but it is also good for beginner-friendly single coils that are not difficult to build.
What is the TCR of nickel wire?
Because of that, this wire has a nice TCR of 0.006, which means it’s easy for devices to determine the amount of current needed to maintain and when to cut it off to reduce the risks of overheating.
poolman Full Member
great knowledge. I have been thinking about doing a twisted build to run a higher resistance dual coil, with using SS. I don't know what flux and those other numbers mean but I am interested in finding out now.
stols001 Moved On ECF Veteran
Very informative, thank you! I'm not too worried about exotic coil builds, but it's fascinating to learn more about the differences between builds.
Skreech Senior Member
I use 2 strand twisted titanium wire on my TC builds just to increase surface area. Trouble is they don't cool down quick enough between puffs, so although I'm getting more vapour, my mod is always flashing 'Temperature Protection' at me.
Skreech Senior Member
Yesterday I built a new dual deck with 3 strand twisted 28g kanthal wire with as tight a pitch as I dare. I made 2 coils with 8 wraps on a 3.5mm former. It comes in at 0.45ohm. It crackles and pops really loudly even after two tanks. (And boy does it go through tanks ). It's like a mini firefight going on in my atty all the time.
Zakillah Super Member ECF Veteran
Building coils is a balancing act. In order to support higher wattage without getting too hot, you need to minimize heat flux. But this usually requires more wire mass with a higher heat capacity, causing a longer ramp-up time, often even with the higher wattage being taken into consideration.
chanelvaps ECF Guru Verified Member ECF Veteran
I love my Aromamizers. Have always had them built by others. Usually claptons. I have now moved far away from the guy that built them for me.
MidwestGuy Super Member Verified Member ECF Veteran
Yesterday I built a new dual deck with 3 strand twisted 28g kanthal wire with as tight a pitch as I dare. I made 2 coils with 8 wraps on a 3.5mm former. It comes in at 0.45ohm. It crackles and pops really loudly even after two tanks. (And boy does it go through tanks). It's like a mini firefight going on in my atty all the time.
What is twisted mess wire?
Twisted Messes is an American company and site. It offers resistive vaping wires in Nichrome80 and Kanthal. It’s also Sandvik, so great quality. His wire is more expensive than what can be found elsewhere. For example, a reel of 100 Nichrome80 feets costs $ 19.99. That’s okay, but nothing more. In terms of delivery, it is mainly intended for the American market. But if you find Twisted Messes wire near you, don’t hesitate, it’s good stuff.
What is a vape extreme?
Vap’Extrême is a French company that offers resistive vaping wires of different diameters in alloys such as Kanthal, Nichrome 80 or 90, SS, but also ribbon and flat wire. Its wire is marked with Sandvik which is considered to be among the best on the market. High purity and good durability.
What is stealth vape?
Stealth Vape is a UK site that offers resistive vaping wires of good quality. He is also the representative of Evolv in Europe which notably makes the DNA chipset. The prices are in pounds sterling, but we find an equivalence with the prices of other manufacturers of resistive wires.