Temperature control mode was developed to stop the occurrence of burnt coils or ‘dry hits’, when used properly your coils will never run too hot and subsequently will never burn. In effect, Temperature Control mode will act as a safety net and can help your coils last longer, while at the same time delivering a better vape.
What is temperature control mode on a vape?
In effect, Temperature Control mode will act as a safety net and can help your coils last longer, while at the same time delivering a better vape. This has led to a great number of temperature control vape mods and kits being created.
What is the best temperature to vape at?
General Guidelines For Vaping As a general rule, setting your vape gear to a temperature above 392 ℉ provides more of the cannabinoids that affect your body. Setting your vape gear to a temperature below 392 ℉ provides more of the cannabinoids that affect your mind and consciousness. Want more than just higher and lower?
What are the benefits of programming a temperature on a vape?
The option of programming a temperature also gives you control over the style of vape you’ll experience. A lower temperature can be used to experience a longer, cooler inhale; whereas a higher temperature can be programmed for a shorter, powerful vape.
Why is the temperature of your marijuana vape important?
That’s because the temperature at which you “burn” your marijuana is almost as important as the strain you choose. But don’t worry—the experts at Honest Marijuana have created a vaping temperature chart so you can make sure you’re always getting exactly what you need. Along the way, we’ll also talk about:
What temp should my vape mod be at?
Many people agree that 420 degrees Fahrenheit or 216 degrees Celsius is the sweet spot. You get as much flavor as possible without feeling the warmth of the vapor. If you want to add even more flavor, try a temperature between 425 and 450 degrees Fahrenheit or 218 and 232 degrees Celsius.
What setting should my vape be on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What is temperature control mode?
Temperature Control (TC) mode allows you to set a specific temperature value on your mod at which your e-juice will be vaporized. Your mod will adjust its power output according to the set temperature value so that the coils temperature will remain constant and under control.
What is the best mode for vape?
Wattage and Voltage Mode, also referred to as Power Mode, is the most common mod setting for vapers because of its simplicity and effectiveness. With Power Mode, you will be setting the amount of total power going directly to the coil.
Is temperature control vaping better?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
At what wattage should I vape?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What are the different vaping modes?
What Are the Different Vaping Modes and What Do They Mean?Variable Wattage and Variable Voltage Mode. When you turn a vape mod on for the first time, it'll probably start in variable wattage mode. ... Temperature Control Mode. ... Wattage Curve Mode. ... Bypass Mode. ... Smart Vaping Mode.
What wattage should I vape at 0.2 ohm?
0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
Why does my vape taste burnt?
If you vape at a wattage that's too high for you coil head, your e-liquid will vaporise too quickly. When this happens, the wick can't re-saturate quickly enough, so the coil ends up burning the wick which causes that unpleasant burnt taste.
What is puff setting on vape?
The Function of the “Puff” Menu: This menu is designed to manage the vaping plan, it can help SMOK users to calculate the vaping puffs, setting personal plans. When the vape reminds for "max puff" or "puffs over", it means the vaping puffs have reached the Maximum.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
What is the advantage of TC mode?
In TC mode, if the wick runs dry the temperature will start to rise, and therefore the temperature protection will immediately cut power to compensate.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
What is vape gear?
Vape gear, like vape pens and counter-top vaporizers, operates at much lower temperatures than your typical open flame. In fact, some vaporizers allow you to dial in exactly the temperature you want. This prevents the cannabinoids you need from literally going up in smoke.
What temperature does a BIC burn?
When you light a match or flick your Bic, the flame produced is, at minimum, 600 ℉. That’s hot! So hot, in fact, that it’s actually destroying a portion of the cannabinoids in your pot. That’s bad! A normal flame can do so much damage because most cannabinoids begin to boil at half (or even a third) of that 600 ℉.
What is a Temperature Control Mod?
Temperature Control is the vape industry's solution to dry and burnt hits. It keeps a consistent vape when taking longer drags since the temperature remains the same rather than getting hotter. The user chooses the temperature limit and the power sent to the coil automatically adjusts to keep the coil at the chosen temperature.
How Does Temperature Control Work?
Temperature Control works as the metal of certain mods increase the resistance as they heat up. However, if you vape with Kanthal, which is the most popular wire type, the resistance doesn't change, it remains static no matter the temperature.
What Do You Need For Temperature Control Vaping?
First, you need a mod that allows you to control the temperature. You can buy a temperature control mod here. There are a number of differences between the devices, with some coming with special and advanced features. Some mods do a better job at controlling the temperature than others do.
How to Vape in TC Mode
Put your mod in temperature control mode and pick the matching wire type for your coils. If your mod has a TCR, you can enter the exact value. After, make sure both the mod and the tank are at room temperature so the measurements are more accurate. The simplest way to accomplish this is by not using the kit for 15 minutes before starting.
Best Vaping Temperatures
A common vape temperature is in the range of 200 to 250 °C with the temperature adjusted quickly in increments of 5°C.
Pros of Temperature Control Vaping
Stops burnt/dry hits - While there are many ways to stop dry hits, temperature control is probably the best, since it does it automatically. If the wick runs dry, the temperature will rise and the temperature protection will cut power to compensate. As a result, you just get less vapour rather than a dry hit.
Cons of Temperature Control Vaping
More Complicated - Unlike some vapes, temperature control vapes require you to do some trial and error to get the perfect temperature.
How Does Temperature Control Vaping Work?
The purpose of TC vaping is to limit the temperature of the coil in your vape tank, thus minimizing the chance of a burnt wick or dry hit. When you use temperature control mode, you define the maximum temperature that your coil should be allowed to reach. Your mod then monitors the coil temperature as you vape.
What Happens When You Put Your Mod in Temperature Control Mode?
When you put your mod in TC mode, you’ll need to configure two things: the maximum temperature that the coil will be allowed to reach and the “preheating wattage,” which basically determines how quickly the coil will reach that temperature.
What Equipment Do You Need for TC Vaping?
To vape in TC mode, you need two things. The first item – as you probably already guessed – is a vape mod that supports temperature control vaping. As we mentioned above, temperature control is a feature that’s implemented in firmware.
What Are the Pros and Cons of Temperature Control Vaping?
Let’s talk now about the experience of using a TC vape mod in temperature control mode. TC vaping definitely has its benefits, and there are definitely plenty of people who prefer temperature control over wattage-based vaping.
Why do you need TC vape?
The major benefit of TC vaping is that it stops your coil from running too hot. This in turn ensures your coils last longer as they won’t burn out prematurely, while also making sure your RDA/tank avoids any damage. Keeping your coils in good condition also means that you can maximise their lifespan , for a more cost-effective experience overall.
Do you need TC mode for Kanthal?
You’ll need a kit or mod programmed with TC mode in order to experience Temperature control vaping. As well, you’ll also need compatible coils. The majority of vape coils use Kanthal in their construction, Kanthal does not work with TC mode as its resistance does not change when it heats up.
Choosing Coils
Today, there are a wide range of coils available specifically for temperature control devices. For the most part, you will be working with Ni200 or Stainless Steel (SS316L) coils. Hopefully, you checked your device before you brought it home to ensure you have the correct type of coils on hand.
Selecting Your Mode
The next step in your setup process is to select the temperature control mode you will be using. Depending on your device, this can go several different ways. You may need the assistance of your user manual to figure out the menu for the first time.
Base Settings
In order to ensure that your device is functioning properly and that all temperature control operations are accurate, you first need to lock in your resistance at room temperature. Setting a base line temperature without electricity going through the coil will establish all temperature sensing as your coils heat up.
Getting in the Groove
If you are working with a high powered device like the Vex 150 TC Mod, you have plenty of room to work with, so start slow and take your time. At each interval, stop and take a few hits.
For Next Time
Now that you have set up your temperature control device successfully for the first time, you’ve got a good feel for the way it’s done. It may be slow going at first, but you will get familiar with the menu quickly and soon you will have a good idea of what settings give you the best results so you can narrow down your search for the perfect vape.
Can you vape with TC mode?
Vaping is a very personal experience. No vaper likes the same - with coil resistance or e-liquid flavour just some ways you can adjust to suit the individual. With TC mode, it’s a great idea and can work to the vapers advantage, should they have the right set up. For recognising dry spots or burnt coils, it’s perfect for protecting your coils from damage. If you’re lucky enough to find a mod device that not only offers adjustable TC but customised TCR too, that demonstrates an advanced vaping kit which can be fine-tuned to meet high demands. For example, you will know that your e-liquid is running low because the vape will lose its consistency - slowly reducing in temperature.
Does TC stop dry vaping?
TC stops dry and burnt hits when you vape, killing the chance of them before it begins. This is fantastic for vapers of any level because you can enjoy the same consistently pleasing experience and not feel like the vaping gradually gets worse with each inhale.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
Why is my vape coil burning?
Another big reason is that new vapers will often apply too much power to a coil, which will often result in a burnt coil. With temp control, those new users can give it as much gas as possible, and the feature will continue to work its magic by keeping the wick and coil from taking on any damage.
What is SS mode?
When you use specific wire types and you use the designated mode, such as a Stainless Steel (SS) mode, the device recognizes the material being used, it refers to the built-in preset numbers it has stored in its memory, then as you adjust the temperature, the device will automatically calibrate to the coils upper limit.
What is wattage setting?
Wattage Setting For Temperature Control. When you use the temperature mode, you also have the wattage factor to play into things. Using the mode, you’ll not only have to adjust temperature, but you’ll have the adjust the wattage as well. While some devices will do this for you, there are many that don’t, and that leaves you wondering ...
