It involves setting a maximum temperature for the vape that the coil will not exceed. When the mod detects that the coil is close to reaching the set temperature it begins to act as a limiter and it gradually decreases the wattage. It’s the same as thermal throttling inside your laptop.
Full Answer
How does a vape mod work?
The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature. Think of it as a car traveling in cruise control. To maintain a speed, more power is needed to go up a hill than down a hill… but the speed would stay the same. First and foremost, a vape mod that supports TC.
How do I control the temperature on my vape mod?
Kanthal (Ka1) and Nichrome (Ni80) are hardly affected when heated, so this makes them useless for temperature control vaping. You have to go to Temp Control settings on the mod, and in there you will find the controls for setting your desired temperatures – usually in Celsius or Fahrenheit.
Why do some mods with temperature control have different settings?
In the case of vapers, the material here is the coil and how it reacts when heated. You see, certain materials react differently to increases in temperature. This is the reason why mods with temperature control have different settings for certain materials.
What are VV/VW vape mods?
In simple terms, VV/VW are a battery powered vaping device that has an internal circuitry that regulates its output power through adjusting voltage, or adjusting the wattage. The internal circuitry feature is what makes these mods safe to use, and a great starter mod for beginners.
What should the settings be on my vape?
For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage. They also tend to produce less vapour and at a cooler temperature. With this in mind, it's upon you to find out what works best for your palate.
What temp should my vape mod be at?
390 F to 490 F.The best temperature to vape e-juice is in the range of 390 F to 490 F. The sweet spot for many temp control vapers is 420 F. Most temperature control vape mods have the capability of 200 F to 600 F.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
How do I get the best flavor out of my vape?
ContentsBest Wattage and Temperature Settings For Flavour.Reduce Your Airflow.Choose Your Coil Carefully.Wicking and Coil Materials Matters.Think About VG:PG Ratios.Below-Coil Airflow Boosts Flavour.Choose a Narrower-Bore Drip Tip.Keep Your Wicks, Coils and Tanks Clean.More items...
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
What are the benefits of temperature control?
Benefits of Temperature Control Vaping 1 Better Flavor Control: Certain E Juices perform better at different temperatures. For instance: having a lower temperature might bring out the sweetness more. Or, going higher could bring out richer tones. 2 Fewer Dry Hits: Because the maximum temperature is locked, you won’t get anywhere near as many dry hits – the atomizer just can’t get enough power to do it. 3 Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. 4 You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power). Less power means less E Juice burned.
Does a coil last longer with a temperature locked coil?
Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power).
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
What Is Your Sweet Spot For Vaping?
Your sweet spot refers to the point during vaping when you can enjoy an optimal vaping experience. It’s a combination of factors, including implementing specific settings on your vaporizer and choosing the right vape juice. The quality of your vaporizer also plays a crucial role in determining your sweet spot.
Sweet Spot and Vape Quality
As we’ve just highlighted, the quality of your vaporizer plays an instrumental role in determining how efficiently you can achieve your sweet spot. With low-quality e-cigs, it’s almost impossible to experience your vaping sweet spot.
Sweet Spot and Vaporizer Settings
There are two significant settings to implement on your vaporizer to achieve your vaping sweet spot. They include airflow and temperature.
Sweet Spot and Vape Juice Composition
The composition of your e-juice is another crucial consideration when trying to achieve your vaping sweet spot. Most e-juices contain base liquids (vegetable glycerin and propylene glycol), nicotine, and flavorings.
What happens if you increase the wattage of a vaporizer?
Also, remember that when you increase the wattage of your device, your coil works on more power and generates more heated vapor.
What does higher power mean on vapes?
4. Clouds. Just like the temperature of vapes, the thickness of your clouds is also determined by your device wattage settings. Higher power means thicker clouds, and vice-versa. Always remember that higher wattage burdens your coil, so prolonged usage of full-power must be avoided.
What to do if your vape is burning?
If you are experiencing burnt taste or super hot vapes, it is time you tone that wattage setting down. As a beginner, I recommend that you stick to either average setting or lower settings, and get yourself familiarized with vaping first before you crank up the wattage.
How much wattage do I need to vape?
If you want the best of both worlds, maintain an average wattage of about 40W.
What does wattage mean in vaping?
In simple terms, wattage is the amount of power that you allow your device to use as you vape. The higher the wattage, the stronger the power of your vape device, but higher doesn’t always mean the best for you!
When will vaping be available in 2020?
December 9, 2020. June 11, 2020 by John. Every beginner wonders what wattage is best for vaping and there is no clear single answer to that question. The majority of modern vape devices offer a wide range of wattage settings and it could be a daunting task for a beginner to choose the right setting. The wattage you need to choose depends on several ...
How long does e-liquid last?
Whenever you increase your system’s wattage, you should expect a higher consumption of e-liquid. For an average setting, if your e-juice lasts for 2 days , consistently vaping on high power will use it all up in just one day.
What does variable vaping mean?
Variable vaping can mean variable wattage, variable temperature, and other technical mumbo jumbo. But perhaps one of the more enigmatic terms you’ve most likely encountered is TCR. We see it as one of the main features of a mod, or you’ve probably seen the term in your mod’s manual. While we appreciate the extra feature, ...
What does SS mode mean?
When SS mode is used this means the TCR is rated for the specific material of their own coils. If Company A’s coils are made from, say, 316 stainless steel, then its mods are tuned for the same material. If you use coil heads on a mod made from the same manufacturer, you probably don’t need to mess around with TCR much.
What alloy should I use for mods?
Instead of just displaying “SS” or “Ti” or “Ni”, they should display the exact alloy used like “SS316”. This would at least give users an idea what the mod is tuned for and they can adjust accordingly.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
What is the advantage of TC mode?
In TC mode, if the wick runs dry the temperature will start to rise, and therefore the temperature protection will immediately cut power to compensate.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
What are the advantages of a throat hit mod?
Other advantages that these mods have over mechanical and hybrid mods is that they have safety features .
What is variable voltage?
Variable Voltage/Wattage mods are the most popular and commonly used vaping devices. Since vaping became popular these mods have evolved, have become widely available, and affordable. Beginners should get familiar with these mods before trying out mechanical or hybrid mods.
What is an ohm in vaping?
What is an Ohm. First of all, ohms represent a unit of measurement for resistance, and when it comes to vaping they translate to how difficult is for the electrical current from the battery to pass through the heating coil. The lower the resistance, the faster a coil heats up to a certain temperature and controlling this value is key in delivering ...
Is sub ohm vaping good?
Sub ohm vaping can be very rewarding, but at the same time it has a few downsides. The first is that it's mostly suitable for direct lung inhales, which is a style of vaping not that familiar to smokers or beginners. In order to fully enjoy the big clouds you need to draw the vapor straight into the lungs, which requires a very airy draw on the tank or atomizer.
