What are the coils on this vape tank?
This vape tank was built to pamper your taste buds with rich flavor. It adopts one 1.6ohm kanthal coil for a cooler vape at lower wattage and one 0.8ohm kanthal coil for a slightly warmer vape at higher wattage.
How to hold a vape tank properly?
Remember, the tank is made up of numerous moving parts, so you should know where to hold it to avoid damaging it. You should apply pressure to the correct part of the tank, bearing in mind that there are various tank designs as well as different types of vaping devices, as you can find on the ePuffer website.
What is a vape tank and how does it work?
A vape tank is the part of your e-cigarette or mod that holds your e-liquid and contains the coil which vaporizes it. In most devices, the tank sits on top of the battery, which is the pen-like part on older designs and the bigger, usually box-shaped part on modern devices.
What is a top cap on a vape tank?
Top Cap – the top cap is the top piece of the vape tank assembly. The top cap may thread into the chimney or may be permanently attached to the chimney depending on the specific model. Today’s top-fill vape tanks typically use a removable cap, a rotating, or sliding feature to give access to the tank for quick refills.
What is the bottom part of a vape?
The Chamber or Tank In a wax or dry herb vape pen, this is usually called the chamber. Regardless of what you call it, this part of your vape pen is where you load your vape material. Some smaller wax vapes don't have a chamber or tank, so you load your vape material directly onto the atomizer.
What are the parts of a vape tank?
The Different Parts of Vape TanksOuter tube: The outer tube is typically made of clear Pyrex glass, which is why you can see through it. ... Base and top caps: On either end of the glass outer tube is a metal piece. ... Drip tip: This is a mouthpiece through which you draw vapor.More items...•
What is the dial on the bottom of vape pen?
Variable Voltage Vape Pen Batteries You can switch between different voltages with a dial at the bottom of the battery or by clicking a button to find your preference. The good thing about variable voltage batteries is that they work with almost every 510 threaded cartridges because you can change the voltage.
How do I find my pin 510?
Check the 510 Pin on your Tank If you can unscrew the base of your tank then do so. Inside the bottom section of the tank (usually the airflow control ring) there should be a plate. Push this plate down from the inside so that the 510 pin is sticking out again from the bottom of the tank.
What part of a vape is the atomizer?
CoilsThe Coils—Vape coils are part of the atomizer and may be referred to as “atomizer heads.” When you press the vape button, your coil will begin to power and heat up, vaporizing the liquid within a wicking material inside the atomizer.
What are vape accessories?
Vape Accessories and E-Cig partsE Cig Batteries.Drip Tips.Custom Drip Tips.Cartomizers.Vape Accessories.Vape Tank Extension & Adapter.E-Cig Carrying Cases.E Cig Charger.More items...
What wattage should I set my vape to?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
How do I adjust my vape settings?
1:503:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid weMoreHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid we recommend a 70 30 ratio as the device is more powerful if you use 50 50 liquid in a sub-ohm.
How do I adjust the heat on my vape pen?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you're taking your hit.
What is a 510 connector vape?
A descriptor of the threaded connection used to join parts, “510” literally refers to 10 threads at 5mm. This type of threaded connection quickly became the standard for most e-cigs and vape pens, making it easier to use various cartridges and pens together.
What is a 510 Adaptor?
This 510 adapter is a versatile product which can convert your Voopoo Drag S and Drag X kit into a standard 510 mod. It is compatible with most 510 threaded tanks and atomisers, however those with a non-adjustable 510 pin may not work with this adapter.
What is a 510 vape adapter?
The 510 connector get its name from the length of the connector and the amount of threads it has for it to make a connection. It runs 5mm long and 5 threads is on the male connection, which is on the atomizer, and the other 5 is on the female connection, which is on the battery or mod.
How long does the warranty on the iPV 5 extend?
The limited warranty we offer on the iPV 5 lasts 3 months from the date of purchase
How do I lock the resistance on the IPV 5?
Press and hold the plus and minus buttons at the same time until it displays the locked resistance
Why does the device say “no liquid” or “dry coil” when in temp mode?
The device displays this when the resistance bounces and can be easily fixed by locking the resistance
How long does the warranty on the iPV D3 extend?
The limited warranty we offer on the iPV D3 lasts 3 months from the date of purchase
How do I lock the resistance on the IPV 5?
Press and hold the plus and minus buttons at the same time until it displays the locked resistance