Unlike most convection vapes, the Firefly 2+ performs best with a coarse grind. or even just hand torn herbs. The top of the bowl has no screen between it and the cooling path, so if you grind too finely, the bits will get sucked away from the heater. Coarser material will stay put and vape better in the Firefly vapes.
How to use a Firefly vape gun?
To be frank, the first Firefly is a lot easier to use; mainly because of the lack of tech. All you have to do, once you have loaded the chamber, is press a button on the side and the herb heats up. The coil hits 400 degrees Fahrenheit in around five seconds with seven as the limit. You can hold down the button to increase vapor production.
How long should you preheat a Firefly vape?
During our OG Firefly vape review, we found that the actual vapor quality on the unit was best when we preheated the chamber for six seconds and held the power button for the 30-second maximum. You will benefit from a great draw and decent vapor quantity if you do this.
Is the Firefly 2 a good vaporizer?
This is mostly because people who have become accustomed to session style vaporizers had to learn a new technique in order to get used to the on-demand heating of the Firefly 2. Once you get the hang of it the Firefly 2 is a great device and can output some serious vapor.
How do I get the most out of my Firefly 2?
The key to getting the most from the Firefly 2 is how you draw on the mouthpiece. You want to take long, deep draws that last around 6-10 seconds. It sounds weird, but you quickly get used to it. In contrast, short, sharp draws will deliver nothing in the way of vapor or flavor, so avoid these at all costs.
How do you hit a Firefly?
1:118:05Firefly 2+ Review, How To, & Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipStarting at 180. And then going from there then take both of your fingers. And press the sensors onMoreStarting at 180. And then going from there then take both of your fingers. And press the sensors on either side of the unit. The logo will light up and pulse.
What temperature should I set my Firefly 2?
0:000:27Firefly 2+ How to Change Temperature Settings without the AppYouTubeStart of suggested clipEnd of suggested clipAnd tap your left side to set the temperature. If you tap it six times it will go to the highestMoreAnd tap your left side to set the temperature. If you tap it six times it will go to the highest temperature. Settings. If you tap it once it will go to the lowest temperature settings.
How do you use Firefly 2 plus vape?
2:354:43Firefly 2 plus Review & How-To - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust press both sensor buttons wait for the light to turn solid green. And then take long slow drawsMoreJust press both sensor buttons wait for the light to turn solid green. And then take long slow draws. This device heats almost instantly to provide on-demand vapor.
What does Firefly calibration do?
0:343:05FireflyPro Calibration Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipImportant when calibrating to keep the distance between the device and the target being measuredMoreImportant when calibrating to keep the distance between the device and the target being measured consistent all the time if the distance changes the measurement will be inaccurate.
How do you increase heat in Firefly 2?
Tap the left button 3 times quickly (while still holding the right button). This puts the Firefly 2 into “temperature setting” mode. The LED blinks red 1 to 7 times, to indicate the current set temperature. Tap the left button again (while still holding the right button) to set the temperature.
Can you use Firefly without app?
The Firefly App is not necessary to operate the device itself. The temperature can also be controlled directly without the App on ALL Firefly 2+ devices, with 7 pre-set temperatures ranging from 320 to 500°F.
Is the Firefly vape worth it?
The Firefly 2 is one of the few devices to actually perform well with concentrates. The temperature goes high enough and melting a glob into the mesh pad allows you to get a dozen nicely sized, very flavorful hits off. Definitely one of the best dry herb and concentrate 2-in-1 vaporizers around in this unit.
Is the Firefly 2+ worth it?
Overall, I've been loving the Firefly 2+ vaporizer. It not only looks good, but the vapor you get out of it is fantastic. If the battery life was a little bit better, I think this would be a contender for best vaporizer in the world.
How do you stir Firefly 2?
Stirring is a necessary evil of convection vapes, and you will want to stir the Firefly 2 once vapor production drops. I do so by dumping my material into my palm and then back onto the unit. I then push the herbs into the bowl with my finger and put the lid back on.
How do you use the Firefly App?
0:000:52Firefly 2+ How to Use the App - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the touch sensors on your Firefly. 2 plus. Then press the connect button on the app the LEDMorePress the touch sensors on your Firefly. 2 plus. Then press the connect button on the app the LED light on the device should blink blue while pairing to set your maximum vapor temperature.
How do you use Firefly recovery?
0:153:11How to use the firefly™ recovery device - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply turn it on by holding the plus. Button for three to four seconds. To feel the device turn on.MoreSimply turn it on by holding the plus. Button for three to four seconds. To feel the device turn on. If you need to adjust the intensity you can increase the level by holding the plus. Button.
How do I know when my Firefly 2+ is fully charged?
Place the Firefly 2 on the charging dock: the LED light blinks blue when charging and turns solid blue when fully charged. For fastest charging: use a wall adapter that is 9 Watts or higher (i.e. tablet adapter) and Firefly 2 will charge the 45 minutes or less.
Why do you start off low in Firefly 2?
You want to start off low because different temperatures deliver different elements from the herb. It also ensures you don’t max-out your materials right away. Running the Firefly 2 this way ensures you get the absolute maximum from each bowl and nothing is wasted.
Can you pack bowls in Firefly 2?
With the PAX 3 and the DaVinci IQ, you can get away with loosely packed bowls. The FireFly 2 requires you to pack things in quite tightly, however, as this ensures the material is heated correctly.
Expectations
The most important thing with any vape is to get your expectations in order. With the Firefly 2+ vaporizer, taste is great almost all the way through the bowl, but the biggest clouds will only be there in the middle of it. Early draws are pure taste while later hits are going to thin out until it is done.
Coarse grind
Unlike most convection vapes, the Firefly 2+ performs best with a coarse grind. or even just hand torn herbs. The top of the bowl has no screen between it and the cooling path, so if you grind too finely, the bits will get sucked away from the heater. Coarser material will stay put and vape better in the Firefly vapes.
Firm pack
Again a bit counter-intuitive for a convection vape, the Firefly 2+ needs the herbs packed firm enough to stay in place and not sucked away from the heat.
Draw slow, then ramp it up
Draw slowly at first, increasing speed during the draw. Play with your draw speed to find your sweet spot.
Should I stir?
Stirring is a necessary evil of convection vapes, and you will want to stir the Firefly 2 once vapor production drops. I do so by dumping my material into my palm and then back onto the unit. I then push the herbs into the bowl with my finger and put the lid back on.
Auto-shutoff
The heater will auto-shutoff after 30 seconds, but if you want to draw longer, just give one of the buttons a quick release to restart the timer. The light will go out when you let go of the button, and will come right back on after you touch it again. If you do it quickly enough the temperature of the bowl won’t drop much.
Troubleshooting
If you’re following the grind and pack suggestions but not getting good vapor, the two most likely culprits are the lid and the mouthpiece. They need to make a good seals, otherwise air will leak in and thin out the vapor.
How to Use Firefly 2 Vaporizer
Opening your own Firefly 2 Vaporizer is considered to be an aesthetic delight you could have. But, how are you going to get the most out of one of the best vaporizers? Here are some of the best tricks and tips on how you can make use of Firefly 2 Vaporizer. Well, it’s not as difficult as you think for as long as you are going to follow this guide.
Firefly 2 Dry Herb Vaporizer Steps
To make use of this Firefly 2 Vaporizer, you need to lift off its top cover – it is known to be magnetized and needs to be easily pulled off. Then, your chosen dried herbs will be placed on the circular type of heating chamber.
How easy is it to use a Firefly 2?
Personally, I love the Firefly 2 vaporizer, it is very easy to use once you get the hang of it and the on-demand heating cannot be beaten in terms of convenience. It may take a little more effort to get the unit working as intended, but that really is half the fun of this unit. Once you figure out your own technique you will find it very hard to switch back to another unit. If you have any tips or tricks of your own we would love to hear them. And if you are in the market for a Firefly 2 plus be sure to stop by our shop to pick one up. You won’t be disappointed.
Is Firefly 2 a good vaporizer?
The Firefly 2 is a great portable vaporizer but it has been receiving quite a bit of negative attention lately mostly stemming from the fact that it may not be the most user friendly right from the start like other high end units like the Crafty+.
How to pack a firefly 2?
1) Pack The Bowl Properly. The Firefly 2 is a convection vaporizer. This means you need to ensure you pack the bowl correctly. Normally, this means not over packing. But here, more is better. You want to pack the bowl as tightly as possible. Try to make sure it is flush with the top lip of the oven. Once you’ve done this, clear away any excess ...
How long does it take to draw Firefly 2?
The key to getting the most from the Firefly 2 is how you draw on the mouthpiece. You want to take long, deep draws that last around 6-10 seconds. It sounds weird, but you quickly get used to it.
Can you use Firefly 2 while hiking?
OK, this is easily the most annoying thing about the Firefly 2 – especially if you use it while hiking or walking the dog. You have to stir up the materials mid-way through a bowl.
Does Firefly 2 shut off?
The Firefly 2 features auto-shutoff; basically, this means that when you’re done vaping on it the device will automatically shut off, saving you precious points on the battery life front.
How easy is it to use a Firefly 2?
Personally, I love the Firefly 2 vaporizer, it is very easy to use once you get the hang of it and the on-demand heating cannot be beaten in terms of convenience. It may take a little more effort to get the unit working as intended, but that really is half the fun of this unit. Once you figure out your own technique you will find it very hard to switch back to another unit. If you have any tips or tricks of your own we would love to hear them. And if you are in the market for a Firefly 2 plus be sure to stop by our shop to pick one up. You won’t be disappointed.
Is the Firefly 2 better than the first experience?
Using this draw method along with the rest of the tips when it comes to your cannabis and packing the Firefly 2 should yield much better results than your first experience and in no time you will be enjoying the full force of the Firefly 2.
Is Firefly 2 a good vaporizer?
The Firefly 2 is a great portable vaporizer but it has been receiving quite a bit of negative attention lately mostly stemming from the fact that it may not be the most user friendly right from the start like other high end units like the Crafty+. This is mostly because people who have become accustomed to session style vaporizers had ...
Does Firefly 2 have a courser?
Because the Firefly 2 is a convection unit we actually found a courser grind worked best, for a few reasons; first, the courser grind will give you better airflow, because this unit uses convection to cook your cannabis you want to make sure the air has room to move through your cannabis to cook them.
How long does it take for a firefly vape to clean?
Wait for the heating element to cool down, and remove the build-up with alcohol. Most users say they have up to 15 sessions before the unit needs a thorough cleaning.
How hot does a Firefly vaporizer get?
The heat button is on the other side and once you press it, the vaporizer will hit 400 degrees Fahrenheit in a matter of seconds.
What is included in the Firefly 2 vape kit?
Firefly 2 vape accessories include a pair of swappable batteries, a cleaning kit with two plastic toothpicks, a multi-sided cleaning brush & alcohol wipes, concentrate pads, and a USB charging dock. Where the Firefly 2 really diverges from its original, though, is in its temperature settings.
What does it mean when a firefly vaporizer glows?
This is a signal that the heating element has reached its maximum temperature, and thus is ready to use (also makes for a pretty awesome sight at night).
How many concentrate pads does Firefly 2 have?
The Firefly 2 comes with three concentrate pads which enable you to vape wax or e-liquids. Simply take one of the pads, place it in the chamber, and add your e-liquid or wax. We found that a few drops of oil or 0.1 grams of wax were enough for a satisfying session.
What is the difference between Firefly 1 and Firefly 2?
The Firefly 2 is significantly smaller and lighter and you can purchase covers in multiple colors including red, blue, black, and gold. The Firefly 1 is made of stainless steel and borosilicate glass while the heating chamber is made of ceramic superalloy.
How many heat settings does the Firefly 2 have?
While the original was a one-shot deal, the Firefly 2 offers you six heat settings, which is crucial as it now allows you to fully customize your high. It uses a 50-watt heater and a bowl made from borosilicate glass, and one of the six settings is specifically for concentrates such as wax and butter.
