What type of wire does TCTC vape use?
TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L.
What is the TCR of a vape wire?
Wires suitable for TC are chosen because of their Temperature Coefficient of Resistance (TCR). The TCR of the vaping wire is the increase in resistance of the wire as temperature increases. The mod knows the cold resistance of your coil, and the material you are using.
How does a TC vape work?
For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises. The mod checks the resistance of the coil at room temperature, then it continues to monitor it as you vape. The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature.
What type of wire is used for vaping?
Some wire is used for vaping with wattage, some with temperature control, and one main type we’ll talk about can be used for both. None of the information should overwhelm you or burden you in technical data. It’s a high-level overview. The focus will be on single-strand wire, and only on wires that are commonly used for vaping.
What temperature do you vape TC?
390°F to 480°FNow that your device is on the ready, let's talk about one of the most confusing factors involved in TC vaping — choosing the right temperature to vape at. The best-recommended temperature to vape at ranges from 390°F to 480°F (200°C to 250°C), but it all comes down to personal preference.
What gauge wire is best for vaping?
Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance. Mouth to lung vapers appreciate their higher builds, and a 26-28 gauge Kanthal wire is always dependable—and hard to swap for anything else.
What does TC NI mean?
First Time Temperature Control Setup: Depending on your vaporizer, it may have a single TC Vape Mode that supports both Nickel (Ni) and Titanium (Ti) coils, or it may have a specific Temperature Control Mode that must be set to support either Nickel (Ni) or Titanium (Ti) coils individually.
Which wire is best for vape?
Stainless steel wire comes in a variety of grades but SS316L is medical and food grade and thus the most popular type used for vaping. Stainless steel wire heats up faster than kanthal or nichrome and that makes it the go-to wire for vapers seeking a quick and hard draw.
What coil is best for flavor?
The best ones to go for flavour wise are clapton, titanium (if you prefer vaping with TC mode) or an Alien coil. The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
What is the best wire for flavor?
Best Vape Wires Reviewed: Keeping Flavor, Build and Clouds in MindProduct NameBest ForTEMCo 28g Kanthal A1 WireGood flavorMaster of Clouds 22g Kanthal A1 WireGood flavorMaster of Clouds 26g Stainless Steel WireExcellent flavorPure Atomist 28g Stainless Steel WireExcellent flavor1 more row•Dec 6, 2016
What's the best setting for my vape?
Low-temperature vaping is the top recommendation for vape pens. It has a better flavor and it's safer, having less impact on your lungs. Low-temp vaping is usually set at 374℉. This setting produces a thinner vapor than higher temperatures.
What is TI mode vape?
Titanium Mode (or Ti Mode) is a specific mode only to be used with titanium wire. Like nickel, titanium boasts a quick heat ramp-up, but does not cause allergic reactions in its users. However, titanium does oxidize when dry heated, so you'll want to make sure not to fire your coils before they are wet.
What is smart TC Vaporesso?
The Smart TC Mode can provide an one-step temperature control with the automatic identification of tanks. Moreover, you can vape with manual settings in DIY Mode. Powered by dual 18650 batteries, the Vaporesso GEN S device can fire out max 220W output to bring you a powerful vaping.
What is the safest coil for vaping?
in stainless steel. Chromium (Cr) undergoes passivation by oxygen present in the air. During this process a very thin layer of chromium(III) oxide is formed. It is widely known that chromium(III) compounds are recognised as safe.
What is the most popular vape coil?
The Best Vape Coils Are:HorizonTech Falcon 2 Coils.Freemax Fireluke 3 Coils.HorizonTech SAKERZ Coils.Flatwire UK Flat Sixty 22g Flat Wire.Freemax Quad Mesh Coils.Aspire Nautilus BVC Coils.SMOK Nord Coils.Vaporesso EUC Ceramic Coils.More items...•
Do all the vape coil work same?
The wire coil inside your vape coil can be made of any number of materials. Each of these vape differently and depending on the type of wire you might need specific features on your e-cig to use them.
How Does Temperature Control Vaping Work?
The purpose of TC vaping is to limit the temperature of the coil in your vape tank, thus minimizing the chance of a burnt wick or dry hit. When you use temperature control mode, you define the maximum temperature that your coil should be allowed to reach. Your mod then monitors the coil temperature as you vape.
What Happens When You Put Your Mod in Temperature Control Mode?
When you put your mod in TC mode, you’ll need to configure two things: the maximum temperature that the coil will be allowed to reach and the “preheating wattage,” which basically determines how quickly the coil will reach that temperature.
What Equipment Do You Need for TC Vaping?
To vape in TC mode, you need two things. The first item – as you probably already guessed – is a vape mod that supports temperature control vaping. As we mentioned above, temperature control is a feature that’s implemented in firmware.
What Are the Pros and Cons of Temperature Control Vaping?
Let’s talk now about the experience of using a TC vape mod in temperature control mode. TC vaping definitely has its benefits, and there are definitely plenty of people who prefer temperature control over wattage-based vaping.
Why do you need a TC wire?
Wires suitable for TC are chosen because of their Temperature Coefficient of Resistance (TCR). The TCR of the vaping wire is the increase in resistance of the wire as temperature increases. The mod knows the cold resistance of your coil, and the material you are using.
What gauge wire is used for Clapton coils?
Some of the most common gauges used for single-strand coil builds are 28, 26, and 24, and thinner wire used in the exterior of Clapton coils is usually between 40 and 32 gauge. There are others of course, and even odd number gauges.
What wires are used for power mode?
Most vapers prefer power mode: it is just simpler. Kanthal, stainless steel, and nichrome are the three most popular power mode wires right now, and you might be wondering what would be the best one for you. Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, ...
What is Kanthal wire?
Kanthal wire is a ferritic iron-chromium-aluminum alloy with good resistance to oxidation. It is commonly used for vaping in straight wattage mode. Kanthal is a great place to start if you are just getting into rebuilding, dripping, etc. It is easy to work with, yet stiff enough to hold its shape when formed into coils—which comes into play during the wicking process. It is extremely popular as a primary wire when building single-wire coils.
What is wire gauge?
Wire gauge. The first basic characteristic of any wire is the actual diameter of the wire. It is commonly called the wire “gauge” and expressed as a numerical value. The actual diameter for each wire isn’t really important. What matters is that as the wire gauge number increases, the wire diameter gets smaller.
What are the characteristics of wire?
These are the diameter (or gauge) of the wire, its resistance, and the ramp time of different materials.
Can you vape with nichrome coils?
Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, and maybe you should also avoid stainless steel. Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance.
What metal is used to make vape wires?
Those materials are: Kanthal (FeCrAl) NiChrome (Ni80) Nickel (Ni200) Stainless Steel (SS) Titanium (Ti) Each of these materials is specific, and vaping with it will produce different results.
What is TCR in vaping?
TCR is a complex calculation that tells the device how to regulate things to keep the resistance of the vape wire steady and even throughout your vape session. The mod delivers short, intermittent pulses of current, making sure that the temperature never exceeds safety limits.
What are the things to look for when choosing a vape wire?
There are three things way pay attention to when choosing a vape wire – flavor, vapor production, and ramp-up time (how fast the wire heats up). Knowing the properties of each of these wires will give you an opportunity to find one that matches your particular vape style more easily.
What are the two modes of vaping?
In essence, there are two different modes of vaping – the wattage mode and the temperature control mode. Not every wire can be used in both of these modes! If you try, and you don’t know what you’re doing, you’re risking a battery mishap or, worse yet, poisoning yourself. So, tread carefully!
Why does a 20 gauge wire heat up so slowly?
That’s because the resistance of the wire goes down, meaning that it takes more time to heat up. 20 or 22 gauge (thicker) wires will heat up slowly, but same is true for coils that are made from thinner wires but have multiple strands (exotic coil builds such as the Alien or Clapton).
What is SS wire?
Stainless steel wire is available in a lot of grades (316, 316L, 410, 413, just to name a few) and most of these grades are suitable for use when building vape wires. However, because there are so many options, there’s often confusion as to how good SS really is – that’s because some talk it up, while others hate it with a vengeance. Of course, these people are usually talking about totally different SS wire grades.
What is the TCR of a nickel wire?
Vapers familiar with temperature control mods will remember that nickel was, in fact, the first wire used for it. Its TCR is a nice, round number (0.006) , which means that it’s easy for devices to calculate how much power needs to be applied to it and when to cut it to maintain a safe temperature. With that said, you need to know that nickel should only ever be used with TC. It has a propensity to overheat when used in wattage, which means that it can catch on fire and melt, leaching harmful substances into your vapor.
Why do you need TC vape?
The major benefit of TC vaping is that it stops your coil from running too hot. This in turn ensures your coils last longer as they won’t burn out prematurely, while also making sure your RDA/tank avoids any damage. Keeping your coils in good condition also means that you can maximise their lifespan , for a more cost-effective experience overall.
Do coil wires react to heat?
Different coil wire types will react to heat and their resistance will increase at a different rate. It is for this reason that each TC mod and kit will have different modes available to support these common wire types. It’s always important though to always check compatibility and manufacturer guidance before use.
Do you need TC mode for Kanthal?
You’ll need a kit or mod programmed with TC mode in order to experience Temperature control vaping. As well, you’ll also need compatible coils. The majority of vape coils use Kanthal in their construction, Kanthal does not work with TC mode as its resistance does not change when it heats up.
What does TCR mean in vaping?
Putting it simply, TCR denotes a number that identifies how the resistance of a material changes as the temperature fluctuates. When talking about vaping devices, the TCR refers to how the coil’s (material) resistance changes as the heat increases/decreases.
What is TCR mode?
To put it simply, the TCR mode allows you to adjust your mod to be as precise as possible, especially with the coils and materials that weren’t manufactured to work with your factory set mod. So, if you are experimenting with unique coils, use the TCR mode for safety purposes.
Why is TCR important?
Importance of TCR Mode. It is a known fact that not all materials (coil) respond the same when there is an increase in temperature. The type of alloy in coils is responsible for establishing the connection between resistance and potential heat.
Do you need to know TCR?
There is no need for you to know TCR values and understand the workings of the TCR mode if you intend to vape with pre-packaged coils and mods created from the same brand.
What does TCR stand for in vapes?
What is Vape TCR Mode? Vape TCR stands for Temperature Coefficient of Resistance. Wellon Vape experts told Olivia that it’s basically a number that describes how the resistance of metal in our coils changes as it changes temperature.
Does temperature control work on vaping?
Temperature control in vaping devices doesn’t actually measure the heat of the coils, but how easily electricity passes through the metal. That’s why when coils go dry and get warmer, the TC controls kick in.
Hectus Senior Member ECF Veteran
Been considering for a while wrapping my own coil for Temp control. I really dont know much about TC and it seems like theres at least stainless 316 and titanium to chose from.
Shadav Vaping Master Verified Member ECF Veteran
the lower resistance is usually for cloud chasing....it really just depends on what you want, what you like?
KenD Vaping Master ECF Veteran
Tc capable wire generally has lower resistance. Don't mind that too much. Just wrap a coil with the wire gauge, coil I'd, and wrap number as you're used to and it should vape comparable to a higher resistance kanthal coil.
kiba Vaping Master Verified Member ECF Veteran
Some coil materials like SS's work better with more coil mass, like a clapton or dual coils, or just adding more wraps. Just something I've noticed, SS has a low tcr so maybe that has something to do with it.
kiba Vaping Master Verified Member ECF Veteran
tbh I'd just do NiFe52, I usually reccommend that to my friends who are committed to kanthal, it even tastes like kanthal and can be used in both TC and power mode like SS.
kiba Vaping Master Verified Member ECF Veteran
would that have anything to do with the resistance on the wire when building for TC, or doesnt it matter if its 0.1 or 0.7 etc?
sofarsogood Vaping Master ECF Veteran
Been considering for a while wrapping my own coil for Temp control. I really dont know much about TC and it seems like theres at least stainless 316 and titanium to chose from.
