What is TC in vape mods and how does it work?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).
What do you need to TC vape?
All you need to TC vape is a mod with the feature (almost any modern device will have it) and a tank or atomizer with a suitable coil type. The “TCR” – the temperature coefficient of resistance – tells you how much the coil's resistance changes with temperature.
What is temperature control mode on a vape?
In effect, Temperature Control mode will act as a safety net and can help your coils last longer, while at the same time delivering a better vape. This has led to a great number of temperature control vape mods and kits being created.
Why do different vape coils have different TCR values?
Depending on the alloy used to make the coil, the relationship between the potential heat and resistance level will change. As a result, different TCR values are used to label different types of coils, to help your device determine the best temperature for vaping with that specific alloy.
What temperature do you vape TC?
390°F to 480°FNow that your device is on the ready, let's talk about one of the most confusing factors involved in TC vaping — choosing the right temperature to vape at. The best-recommended temperature to vape at ranges from 390°F to 480°F (200°C to 250°C), but it all comes down to personal preference.
What does Ω mean in vape?
ohmIn simple terms, an 'ohm' is the measure of resistance of a coil. The symbol for this is 'Ω', and it is commonly known that standard replacement tanks/clearomisers for MTL (mouth-to-lung) vaping are rated between 1.2Ω to 2.0Ω. More recently, this type of coil is referred to as 'plus ohm'.
What should my vape settings be?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What is TC TI mode?
Titanium Mode (or Ti Mode) is a specific mode only to be used with titanium wire. Like nickel, titanium boasts a quick heat ramp-up, but does not cause allergic reactions in its users. However, titanium does oxidize when dry heated, so you'll want to make sure not to fire your coils before they are wet.
Is higher ohm better for vape?
Higher Ohm Coils The best way forward when looking to perfect your vape is to simply try different resistance levels and see how you get on. It really does depend entirely on personal preference and so there is no "best" or "worst" ohm level, it all depends on what you are looking for in your vape.
What ohm is best for flavor?
around 0.3ohmsThe sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
How can I increase my vape flavor?
ContentsBest Wattage and Temperature Settings For Flavour.Reduce Your Airflow.Choose Your Coil Carefully.Wicking and Coil Materials Matters.Think About VG:PG Ratios.Below-Coil Airflow Boosts Flavour.Choose a Narrower-Bore Drip Tip.Keep Your Wicks, Coils and Tanks Clean.More items...
Is vaping safe?
1: Vaping is less harmful than smoking, but it's still not safe. E-cigarettes heat nicotine (extracted from tobacco), flavorings and other chemicals to create an aerosol that you inhale. Regular tobacco cigarettes contain 7,000 chemicals, many of which are toxic.
How long do vape coils last?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
Do Vapes need to warm up?
Warming up your MOD before using it heavily is always a wise choice. To really get into details of why you should let your MOD warm up, we can look at what it does. MODs are extremely powerful technological vaping wonders, but require immense heat and voltage to get those huge vapor clouds they're known for.
What does M1 mean vape?
The M1 is the latest vape in Geekvape's Wenax line, a line that's aimed toward the beginner vaper. The first Wenax, the Stylus, was praised in 2020 for its tight MTL draw and ease of use, and these two features have become synonymous with the line.
How Does Temperature Control Vaping Work?
The purpose of TC vaping is to limit the temperature of the coil in your vape tank, thus minimizing the chance of a burnt wick or dry hit. When you use temperature control mode, you define the maximum temperature that your coil should be allowed to reach. Your mod then monitors the coil temperature as you vape.
What Happens When You Put Your Mod in Temperature Control Mode?
When you put your mod in TC mode, you’ll need to configure two things: the maximum temperature that the coil will be allowed to reach and the “preheating wattage,” which basically determines how quickly the coil will reach that temperature.
What Equipment Do You Need for TC Vaping?
To vape in TC mode, you need two things. The first item – as you probably already guessed – is a vape mod that supports temperature control vaping. As we mentioned above, temperature control is a feature that’s implemented in firmware.
What Are the Pros and Cons of Temperature Control Vaping?
Let’s talk now about the experience of using a TC vape mod in temperature control mode. TC vaping definitely has its benefits, and there are definitely plenty of people who prefer temperature control over wattage-based vaping.
What is Temperature Control Vaping?
The basics of what temperature control (TC, for short) actually does are very easy to understand. In ordinary variable voltage / variable wattage (VV/VW) mods, you choose a wattage or a voltage setting and vape. The setting you choose dictates how much current is sent to your coil.
Why Would You Want to Use it?
The benefits of temperature control vaping should be clear. If you want to avoid horrible dry puffs (and the formaldehyde they bring with them), temperature control is the perfect solution.
What Are the Downsides to Temperature Control Vaping?
Although most vapers like TC, for anybody unsure it’s worth pointing out that not everyone loves it. It’s excellent for consistency in performance and maximizing the harm reduction potential of vaping. On the other hand, as a post on Wake and Vape points out, vapor production will often be reduced a little bit on TC devices.
How Does Temperature Control Vaping Work?
So how does TC vaping actually work? And why isn’t it a set temperature instead of just a temperature limit?
What is a TCR?
When you're learning about TC vaping, you'll come across the term “temperature coefficient of resistance,” or TCR. This tells you the size of the change in resistance for a given change in temperature for each material. So with these TCR values and the relationship between temperature and resistance, your mod works out how hot your coil is getting.
Which Coils Can You Use for TC Vaping?
At this point you may be thinking, “Great, I’ll go get a TC mod to use with my ordinary kanthal coils and get to it!” But it’s not quite so simple. The problem is that the TCR for different materials varies, and the one for kanthal doesn’t work very well for this purpose. The problem is that it’s so low that the resistance barely changes at all.
What Are Joules? How Do They Relate to Watts? A Quick Primer
As if TCR values didn’t make the TC complicated enough, there is another issue to deal with. Many mods use “joules” for their TC mode. So you may naturally be wondering: what are joules and how do I choose the right setting?
What is TC Vaping?
Temperature Control vaping (TC vaping for short) is a mode on your box mod that allows you to control the heat of your atomiser coil. TC mode helps vapers reduce their chances of a dry hit and get a more consistent vaping experience, but it’s also great for making small adjustments to the volume and density of your vapour cloud.
How does TC vaping work?
Box mods don't have in built thermometers that can check the temperature on the surface of your coil. Instead, your mod chip calculates the temperature based on the electrical resistance readings coming off your coil.
How to TC vape
Every box mod has a slightly different set of menu options, but in essence, there are three steps to TC vaping:
What Is The Best Temperature To Vape At?
Our customers often ask us what the right vaping temperature is. Vaping at a low or a high temperature isn’t necessarily ‘bad’ — it just depends on what your personal taste is.
Best Selling TC Box Mods of 2021
We took a look at sales stats on our own site (UK wide) for the first 3 months of 2021 (1 Jan - 30 March inclusive), and there were five clear best selling ‘TC enabled’ box mods. Just to keep it fair, we’ve excluded any mods that were sold at a promotional discount:
Why do you need TC vape?
The major benefit of TC vaping is that it stops your coil from running too hot. This in turn ensures your coils last longer as they won’t burn out prematurely, while also making sure your RDA/tank avoids any damage. Keeping your coils in good condition also means that you can maximise their lifespan , for a more cost-effective experience overall.
Do you need TC mode for Kanthal?
You’ll need a kit or mod programmed with TC mode in order to experience Temperature control vaping. As well, you’ll also need compatible coils. The majority of vape coils use Kanthal in their construction, Kanthal does not work with TC mode as its resistance does not change when it heats up.
How does TC work?
AB, Canada. TC works because a coil's resistance changes with its temperature. However, different metals change at different rates. The TCR (I'm not sure what it stands for - temperature coefficient of resistance?) is a value that your mod can use to calculate the coil's temperature from its resistance - or rather from the difference between its ...
What metals are used in TC?
Titanium (Ti), nickel 200 (Ni) and stainless steel 316L (SS) were the first three metals used for TC, although SS316L has pretty much eclipsed the other two by now. Your mod is programmed with TCR settings for those three. You said there was also a TC setting.
Can you use Kanthal in TC mode?
Some materials have to be used in TC mode, such as Titanium and Nickle otherwise bad byproducts can enter your vape as they overheat. Kanthal can only be used in wattage mode (for the most part a few mods claim to be able to do TC with it) and SS can be used in wattage or TC mode.
What does TCR mean in vaping?
Putting it simply, TCR denotes a number that identifies how the resistance of a material changes as the temperature fluctuates. When talking about vaping devices, the TCR refers to how the coil’s (material) resistance changes as the heat increases/decreases.
What is TCR mode?
To put it simply, the TCR mode allows you to adjust your mod to be as precise as possible, especially with the coils and materials that weren’t manufactured to work with your factory set mod. So, if you are experimenting with unique coils, use the TCR mode for safety purposes.
Why is TCR important?
Importance of TCR Mode. It is a known fact that not all materials (coil) respond the same when there is an increase in temperature. The type of alloy in coils is responsible for establishing the connection between resistance and potential heat.
Do you need to know TCR?
There is no need for you to know TCR values and understand the workings of the TCR mode if you intend to vape with pre-packaged coils and mods created from the same brand.
What is TCR mode in vape?
Vape TCR mode has to do with the specific resistance and heat that corresponds to a particular type of alloy (metal) that’s used in an atomizer coil. In simplest terms, less resistance equals more heat at a faster rate. Depending on the alloy used to make the coil, the relationship between the potential heat and resistance level will change.
What does TCR stand for?
TCR is an acronym that stands for Temperature Coefficient of Resistance – which probably doesn’t make the subject any clearer. Although this may sound complicated, it boils down to a relatively straightforward function.
Why use different TCR values?
As a result, different TCR values are used to label different types of coils, to help your device determine the best temperature for vaping with that specific alloy. This feature ensures that you (and your vape mod) are safe.
Can you use TCR mode on a coil?
If you’re using a device that already has default settings for the coils you’re pairing it with, you won’t need to worry about TCR mode. However, the special feature does come into play when you want to use coils that may not be inherently compatible with your current device.
