Full Answer
What is the preheat mode on a vape?
The Preheat Mode is known to be similar to Temperature Control function, though the preheat will let you vape at lower wattage with just as good vapor production, also giving you a more consistent vape and more of the battery life.
How do I preheat my vape pen?
Just load your dab into an atomizer or 510 thread cartridge and attach it to the pen. Start the temperature somewhere between 3.8V and 4.1V. Run one cycle of the pre-heat mode. Click the button on the device twice and let it run without clicking it again. The pulsing light will indicate if it is still preheating.
How does pre-heating work?
For builds with large mass, a lot of metal, a high preheat gets that larger mass up to temp and then the "lower" wattage/temp control takes over to keep it heated up.
What temperature should you set your vape to?
Common vaping temperatures are in the range 390°F to 480°F (200°C to 250°C ), with the temperature usually adjusted quickly in increments of 10°F (5°C). Set your target temperature. Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick.
Do I need to pre heat with a vape?
It is not necessary to preheat your device before every use, and will decrease your ultimate battery life by doing so. The preheat function heats your device to approximately 2.7 volts, hovering.
What is the purpose of a preheat on a vape pen?
The Preheat Mode is known to be similar to Temperature Control function, though the preheat will let you vape at lower wattage with just as good vapor production, also giving you a more consistent vape and more of the battery life.
How do I adjust my vape settings?
1:503:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid weMoreHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid we recommend a 70 30 ratio as the device is more powerful if you use 50 50 liquid in a sub-ohm.
How do you warm up a cartridge?
Just turn the cartridge upside down until all the liquid reaches the mouthpiece. If it won't come down try applying heat to the outside of the cartridge like we mentioned above. Just run the lighter back and forth on the glass for a few seconds.
For pre-filled oil cartridges, set your pen to 3.3V
Prefilled 510 thread cartridges require lower temperatures because the material is thinner and easier to heat. We recommend starting at the lowest voltage, 3.3V, and moving up to 3.8V if it’s not giving you enough of a hit. Some oils have a thicker consistency, so just turn the dial incrementally until you get the desired hit.
For dabs (wax), set your pen between 4.0V-4.3V
Wax is typically thick, so it will take more heat to get it going. Once you load the dab in your atomizer or attachment , set the voltage at 4.0V. Take a hit and expect a big cloud with crystal clear terpene flavors.
Pro tips for extending battery life
It’s actually a myth that turning your battery on and off between sessions will drain the battery. The opposite is true! Making sure your battery is fully resting during the hours between hits will improve your overall battery life between charges.
