What type of wire is used for vaping?
Some wire is used for vaping with wattage, some with temperature control, and one main type we’ll talk about can be used for both. None of the information should overwhelm you or burden you in technical data. It’s a high-level overview. The focus will be on single-strand wire, and only on wires that are commonly used for vaping.
Is nickel wire better for vaping?
While nickel wire can offer better flavor and a faster ramp up time than some other vape wires (such as kanthal), it should only ever be used in temperature control mode. If nickel wire gets too hot and overheats, and you can end up with nickel or even graphite in your lungs.
What is the TCR of a vape wire?
Wires suitable for TC are chosen because of their Temperature Coefficient of Resistance (TCR). The TCR of the vaping wire is the increase in resistance of the wire as temperature increases. The mod knows the cold resistance of your coil, and the material you are using.
What is the difference between 22 and 30 gauge vape wire?
This the time it takes for vaping temperatures to stimulate the heat for the wires. Thus, a 30 gauge wire can have a very fast ramp-up time, while a 22 gauge wire can have a slower one. As I have mentioned, every wire behaves differently from one another. Some wires are extremely difficult to coil and handle.
What gauge wire is best for vaping?
Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance. Mouth to lung vapers appreciate their higher builds, and a 26-28 gauge Kanthal wire is always dependable—and hard to swap for anything else.
What is NI TI and SS?
Stainless steel (SS), nickel (NI), and TI (titanium) are all wire materials. With the exception of stainless steel, which can be used in wattage mode and SS mode, they should only be used in those mods that correspond to them. They allow you to limit the temperature you vape at.
What is the best wire for vaping?
Stainless steel wire comes in a variety of grades but SS316L is medical and food grade and thus the most popular type used for vaping. Stainless steel wire heats up faster than kanthal or nichrome and that makes it the go-to wire for vapers seeking a quick and hard draw.
What is NI mode in vape?
Depending on your vaporizer, it may have a single TC Vape Mode that supports both Nickel (Ni) and Titanium (Ti) coils, or it may have a specific Temperature Control Mode that must be set to support either Nickel (Ni) or Titanium (Ti) coils individually.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What coil is best for flavor?
The best ones to go for flavour wise are clapton, titanium (if you prefer vaping with TC mode) or an Alien coil. The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
What is GA coil?
Induction: Galvannealed is a carbon steel plate that is continuously hot-dipped on both sides of galvanized steel, and an alloying process is performed to diffuse atoms to the galvanized layer.
What is the safest coil for vaping?
in stainless steel. Chromium (Cr) undergoes passivation by oxygen present in the air. During this process a very thin layer of chromium(III) oxide is formed. It is widely known that chromium(III) compounds are recognised as safe.
What's the best setting for my vape?
Low-temperature vaping is the top recommendation for vape pens. It has a better flavor and it's safer, having less impact on your lungs. Low-temp vaping is usually set at 374℉. This setting produces a thinner vapor than higher temperatures.
What does TCR mean on a vape mod?
Temperature Coefficient of ResistanceThe Temperature Coefficient of Resistance (TCR) This specific TCR value of the wire is kept in mind by the vape mod, allowing it to adjust the amount of power being sent to the coil and thus control the temperature.
How do I get the best flavor out of my vape?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
What is the most common wire used for vaping?
Kanthal is the most common wire used for vaping, and is a ferritic iron, chromium-aluminium alloy. Because of its inexpensive price, wide availability, and resistance to oxidation kanthal is a great material for building coils.
How many types of wires are there for vaping?
There are five types of wires that are commonly used for vaping, and they each have differing uses and properties. Some wires can only be used for vaping with wattage, some only with temperature control mode, and one special wire can be used with either. We will discuss each one in detail down below, but first a lesson on wire gauges and resistance.
What is the best vape wire?
Stainless Steel is a special vape wire that can be used with either wattage or temperature control mode, and is a chromium, nickel and carbon alloy. While stainless steel comes in a variety of grades, 316 is medical and food grade and is perfect for vaping.
What does different gauges of vape wires do?
Different gauges (diameter) of vape wires will give you different resistances & ramp up times , while different types of vape wires will give you different flavor & cloud production. Even if you aren’t building your own coils, it can be hazardous to use coils of certain materials in the wrong mode (see Nickel wire down below). ...
What is the best wire for vaping?
Nichrome Wire. Nichrome wire is another great wire that can be used for vaping, and is a nickel and chromium alloy. While less commonly found in stores than kanthal, nichrome is similarly resistant to oxidation and can function at high temperatures without being damaged.
How does a coil temperature control work?
To keep things simple, temperature control mode works by using the TCR or temperature coefficient of resistance of a given wires material. Materials like nickel behave predictably with regards to their resistances at certain temperatures. Your mod uses this information to regulate the current to the coil as it heats up and will reduce the current to the coil if it gets too hot, in order to keep the coil at a safe operating temperature.
Which vape wire heats up the fastest?
Nickel heats up the fastest out of all vape wires and was the first wire used with temperature control mode. Because of its soft and springy nature, nickel wire is harder to work with than kanthal or nichrome. While nickel wire can offer better flavor and a faster ramp up time than some other vape wires (such as kanthal), ...
What is nickel wire?
Nickel wire is commonly known as Ni200 (or pure nickel) and creates some of the best flavorings you can find in vaping. It is the first type of temperature control wire to be utilized. Other common disadvantages include (but are not limited to) difficulties creating uniform coils and deformation during the wicking process.
Why is titanium wire used for temperature control?
Titanium wire is only recommended for use with temperature control because once titanium reaches its maximum heat capacity, it releases titanium oxide. Plus if used with wattage mode and you go above the temperature capacity, you risk having a nearly impossible to put out fire on your hands.
Is Nichrome good for vaping?
NiChrome is recommended for those vaping using the wattage mode. It is a popular choice among advanced build vapers because NiChrome requires very little time to heat up, it holds it is shape well, and is very easy to work with. Nonetheless, it is very important for users to consider prior allergies before using this wire type. In fact, anyone who is allergic to Nickel should avoid using NiChrome wires.
How many types of wires are there in vaping?
There are five common types of wires in the vaping industry. These five materials have distinct differences from one another. These differences are based on temperature control mode and wattage mode. One certain wire can even be used in both modes.
What is the best wire for vaping?
Kanthal Wire. Kanthal is the OG and the first wire that started it all. This is the most commonly used wire for vaping, and it has been recognized for more than a decade now for producing high quality vape coils, both by amateurs and industry professionals.
What is VW vaping?
Wattage vaping, or VW (which stands for variable wattage) is the standard mode of vaping. This allows you to independently set the wattage at which you want your vape to operate. You should be looking for a wire that doesn’t change resistance when heated up if you choose to go with variable wattage mode.
Why is it important to know about vape coils?
It is very important to be aware of all of this information because every wire behaves differently. This will give you information about how vapes taste separately depending on the wire used.
What gauge wire do vacuum cleaners use?
Gauge, in its definition, is the actual diameter of the wire. Vapers usually use 22, 24, 26, 28, 30, and 32 gau ge wire. The bigger the number of the gauge increases, the thinner the wire gets. For instance, a 24 gauge wire at about 0.02 inches, that is 0.51 mm in diameter, while a 30 gauge wire falls at 0.01 inches, 0.25 mm in diameter.
How hot can a wire be before melting?
This wire can also tolerate very high temperatures of up to a astonishing 1,500 °C before it actually starts melting. This wire is preferable for beginner rebuilders because not only is it easy to use, but it is also good for beginner-friendly single coils that are not difficult to build.
What is the TCR of nickel wire?
Because of that, this wire has a nice TCR of 0.006, which means it’s easy for devices to determine the amount of current needed to maintain and when to cut it off to reduce the risks of overheating.
What metal is used to make vape wires?
Those materials are: Kanthal (FeCrAl) NiChrome (Ni80) Nickel (Ni200) Stainless Steel (SS) Titanium (Ti) Each of these materials is specific, and vaping with it will produce different results.
What are the things to look for when choosing a vape wire?
There are three things way pay attention to when choosing a vape wire – flavor, vapor production, and ramp-up time (how fast the wire heats up). Knowing the properties of each of these wires will give you an opportunity to find one that matches your particular vape style more easily.
What is TCR in vaping?
TCR is a complex calculation that tells the device how to regulate things to keep the resistance of the vape wire steady and even throughout your vape session. The mod delivers short, intermittent pulses of current, making sure that the temperature never exceeds safety limits.
What are the two modes of vaping?
In essence, there are two different modes of vaping – the wattage mode and the temperature control mode. Not every wire can be used in both of these modes! If you try, and you don’t know what you’re doing, you’re risking a battery mishap or, worse yet, poisoning yourself. So, tread carefully!
Why does a 20 gauge wire heat up so slowly?
That’s because the resistance of the wire goes down, meaning that it takes more time to heat up. 20 or 22 gauge (thicker) wires will heat up slowly, but same is true for coils that are made from thinner wires but have multiple strands (exotic coil builds such as the Alien or Clapton).
What is SS wire?
Stainless steel wire is available in a lot of grades (316, 316L, 410, 413, just to name a few) and most of these grades are suitable for use when building vape wires. However, because there are so many options, there’s often confusion as to how good SS really is – that’s because some talk it up, while others hate it with a vengeance. Of course, these people are usually talking about totally different SS wire grades.
What is the TCR of a nickel wire?
Vapers familiar with temperature control mods will remember that nickel was, in fact, the first wire used for it. Its TCR is a nice, round number (0.006) , which means that it’s easy for devices to calculate how much power needs to be applied to it and when to cut it to maintain a safe temperature. With that said, you need to know that nickel should only ever be used with TC. It has a propensity to overheat when used in wattage, which means that it can catch on fire and melt, leaching harmful substances into your vapor.
What gauge wire do I use for vaping?
Simply put, a wire gauge refers to the diameter of the wire. Typically, a vaper will use one of the following wire gauges - 22, 24, 26, 28, 30, or 32. The larger the number of the wire gauge, the thinner the wire will be.
What is the best wire for vaping?
Stainless Steel Wire. Stainless steel is relatively inexpensive, and the only double-duty vape wire option available (meaning it can be used for both temperature control and wattage mode). This makes it the perfect wire choice for vapers who use both mode options.
What is Ni200 wire?
The majority of online retailers tend to offer some form of NiChrome wire. Nickel Wire. Nickel wire is commonly known as Ni200 (or pure nickel) and creates some of the best flavorings you can find in vaping.
What is a Nichrome wire?
NiChrome Wire. NiChrome is recommended for those vaping using the wattage mode. It is a popular choice among advanced build vapers because NiChrome requires very little time to heat up, it holds it is shape well, and is very easy to work with.
How to have a successful vaping session?
In order to have a successful vaping session, you need to choose a wire that will not only behave in the manner you are looking for but one that will also work with the specific mode of vaping you (and your device) uses.
What to consider when picking out a vaping wire?
There are two main areas you need to consider when picking out a vaping wire - the size and the material of the wire. These two components can determine not only whether or not it will work within your device, but can also alter the flavor, the time it takes to heat up, and the overall production of vapor (or vape clouds). ...
Why does vaping not work?
This is due to wire behavior because wires tend to behave differently depending upon the type of wire being used.
Introduction
So, you are interested in the world of building vaping coils. This is what has brought you to this location, to this article. Coils and vape wire can indeed be at intimidating at first. Rest assured with some basic information it will all make sense and to be honest, the whole process is fairly easy.
Different Types of Vape Wire
There are several different types of wire available for vaping and each serves a purpose. Each type of wire will also have different advantages or disadvantages over the other. Depending on your vaping style or the result that is desire, certain specific wire may be needed.
Breakdown of Vape Wire Types
So, we have listed the types of wire that are most commonly used in vaping. Each is unique in it’s own. Different vapers have their own opinion of what type of wire is “the best” but the result is entirely subjective and will vary on individual experience.
Odd Wires
Odd wires, such as flat ribbon and square wire serve a purpose but will not be used in the beginning stages of building. Flat Ribbon can be used in complex builds such as mohawk coils, staples,framed staples, corrugated builds and much more.
Conclusion
So, this is the basics of vape wire. Hopefully you have gained a small bit more knowledge to assist you in the journey of building you own coils. It is a very rewarding process. You can also look forward to significant savings over buying disposable coils.
What are vape wires made of?
Vape wires come in many sizes, forms, and materials. They’re always made out of metal, and the most common metals used are kanthal, stainless steel, nickel, and titanium. Kanthal and stainless steel are the most popular options, with stainless steel being used in most vape coils.
What wire should I use for vaping?
It can be used in temperature and wattage control mode. Stainless steel also doesn’t have to include nickel, which is an allergy hazard for some. Some people use SS wire for dry vaping, which is not an ideal idea.
What is a vape coil?
Vape coils are essential parts of a vape pen, and the wire that goes into their construction can significantly impact the flavor, taste, and aroma of your vape juice. That is why getting the ideal wire coil for your vape is such a crucial endeavor.
What is the gauge of a vape?
A gauge is a unit of measurement for the diameter (overall thickness) of the wire itself. The smaller the gauge, the thicker the wire.
What is a vape?
A vape is a relatively complex device. You’re well aware of what it does, but are you aware of how it works? Vapes turn vape liquid into an aerosol, which is then inhaled for the pleasure of the user.
Is nickel wire good for vaping?
Pure nickel is an excellent vape coil wire due to its quick heat up. While some people are allergic to it, it has some very useful properties. It heats up quickly, is affordable, and provides a slightly augmented flavor compared to the previous two.
Is titanium wire durable?
Titanium is one of the world’s toughest metals, so it’s no wonder that it is easy to work with and holds its shape. It also offers a clean flavor and is one of the most durable wiring options. That is practically where the benefits end.
