What is CO2 oil vape cartridges?
CO2 Oil Vape Cartridges CO2 oil is a full-spectrum cannabis oil that is extracted using a liquid CO2 (carbon dioxide) extraction process. Carbon dioxide is converted into a liquid by manipulating temperature and pressure. It’s then used to strip cannabis plant material of its potent trichomes.
Why does CO2 vape have a unique flavor?
This is often the reason why CO2 medicines are described as having clear and unique flavors. CO2 vape cartridges also have a wonderfully hashy exhale and offer full-spectrum relief. It is important to note that terpenes are molecularly the same, regardless of their source (D-Limonene is D-Limonene).
What is CO2 oil?
CO2 oil is a full-spectrum cannabis oil that is extracted using a liquid CO2 (carbon dioxide) extraction process. Carbon dioxide is converted into a liquid by manipulating temperature and pressure.
How much does CO2 weed oil cost?
The cost of custom-made CO2 weed oil can vary wildly. As we touched on above, the cost of an industrial, state-of-the-art, supercritical CO2 extraction system itself can run you about $39,000. Chances are, you don’t have that kind of coin burning a hole in your pocket.
What is the difference between CO2 oil and distillate?
The biggest difference between CO2 oil and distillates is what compounds are in the oil. CO2 oil will be closer in character to the original weed strain, in both flavor and effects. Distillate is produced with a specific goal: isolating one or more cannabinoids from the original cannabis (usually THC and/or CBD).
Is CO2 better than distillate?
Cannabis distillate has a clean and smooth flavor and the user experiences more potent effects than CO2 oil. CO2 oil has a lower price point than distillate and can carry a wider range of cannabinoids and natural flavor.
Can you get high off of CO2 cartridges?
CO2 canisters are sometimes confused with nitrous oxide canisters, used in whipped cream dispensers. Inhaling nitrous oxide is illegal, extremely risky and can cause serious health problems, but some people engage in it to get a "high." Inhaling CO2 from a CO2 canister causes death due to suffocation.
Can you put CO2 oil in a cart?
High-quality winterized CO2 oils are especially compatible with vape cartridges since they do not require any additional thinning agents in order to be vaped out of carts. Because these cartridges contain no additives, the natural strain-specific terpenes (flavors and aromas) of cannabis can shine through.
What is the difference between CO2 and resin vape cartridges?
While CO2 cartridges are highly effective and cost-efficient, live resin cartridges contain a higher amount of natural terpenes and tend to be more flavorful.
What is CO2 cartridge?
CO2 Cartridges. CO2 cartridges are named after the CO2 extraction process that produces the oil they contain. For many, CO2 cartridges have become the gold standard of vape cartridges due to their purity and potency. CO2 oils are able to retain modest levels of plant-based terpenes, meaning that they contain much of marijuana’s natural flavor ...
Can CO2 be used in vape cartridges?
High-quality winterized CO2 oils are especially compatible with vape cartridges since they do not require any additional thinning agents in order to be vaped out of carts. Because these cartridges contain no additives, the natural strain-specific terpenes (flavors and aromas) of cannabis can shine through.
Is CO2 oil better than marijuana?
Therefore, if you are looking to take advantage of marijuana’s medicinal properties, CO2 oil may be a better choice.
Does CO2 oil have terpenes?
Moreover, CO2 still retains a moderate level of plant terpenes, meaning that you are not sacrificing much flavor by vaping a CO2 oil. If you are looking to enjoy the most flavorful and aromatic cannabis concentrate on the market, live resin cartridges are the way to go.
What is supercritical oil?
Super Critical. Super Critical refers to “supercritical fluid” or a substance that acts like both a gas and a liquid at the same time. In our CO2 extraction process, the CO2 can specifically target compounds and profiles by permeating through the flower material as a gas while dissolving the targeted oil as a liquid.
Does CO2 have a clear flavor?
Combined with such a specific and supercritical approach, CO2 can capture a full and robust range of terpenes. This is often the reason why CO2 medicines are described as having clear and unique flavors. CO2 vape cartridges also have a wonderfully hashy exhale and offer full-spectrum relief.
Is CO2 the same as terpene?
CO2 vape cartridges also have a wonderfully hashy exhale and offer full-spectrum relief. It is important to note that terpenes are molecularly the same, regardless of their source (D-Limonene is D-Limonene).
What is CO2 Oil for vaping?
CO2 (Carbon Dioxide) is one of many extraction methods for creating oils from cannabis plants. CO2 is a gas, but with enough pressure, it can change to its liquid form. The cannabis plant is processed in the liquid CO2, which allows the cannabinoids and terpenes to separate from the remaining plant material, creating a concentrated oil.
What is distillate?
Distillate is a highly concentrated extraction method to separate terpenes and cannabinoids from the original cannabis plant. Distillate can form either CBD or THC concentrates from extracted cannabis oils.
Vape pen 101
Vape pens, also called weed pens, are quickly becoming a popular way to consume cannabis. The hand-held device is used to smoke cannabis concentrates such as oils and distillates. Vape pens will heat the oil to produce vapour that’s inhaled through a mouthpiece.
What is the difference between C02 and distillate?
Both CO2 oil and distillate concentrate are great ways to mix in some added potency to your cannabis consumption. But beyond that, these two products are about as comparable as apples and oranges.
The best vape products
To decide what’s better, CO2 oil or distillate, some cannabis consumers say it’s best to try vaping with different products. Kootenay Botanicals has a variety of locally sourced vape accessories and products for vape newbies and connoisseurs alike.
How to make the CO2 Honey Oil?
The CO2 Honey Oil derived its name from the process by which it is extracted and produced through the use of carbon dioxide as the solvent for extraction. The first step in extracting the CO2 Honey oil is the manipulation of pressure and temperature to turn the carbon dioxide into a liquid.
How to use CO2 Honey oil?
The Co2 Honey oil, hash oil, or cannabis oil is primarily consumed through vaporization. This type of cannabis concentrate is often consumed in a vape pen with a pre-filled cartridge. On the other hand, other forms of CO2 concentrate like CO2 wax and CO2 THC extract are primarily consumed through dabbing.
What is Supercritical CO2 Extraction?
A CO2 honey oil can also be produced through supercritical extraction. In this type of cannabis extraction, the CO2 is compressed beyond its critical point until it reaches the supercritical point. It results in a supercritical fluid that is used to extract the main cannabis compounds, the cannabinoids and terpenes. The same process is applied.
How much does CO2 oil cost?
As we touched on above, the cost of an industrial, state-of-the-art, supercritical CO2 extraction system itself can run you about $39,000. Chances are, you don’t have that kind of coin burning a hole in your pocket.
How to make cannabis extract with supercritical CO2?
As you can see in the diagram above, you start with liquid CO2 (top left corner). You raise the pressure of the liquid CO2 via a compressor (top middle), and then raise the temperature via a heater (top right).
What is the difference between butane and ethanol?
For example, in other extraction processes, ethanol alcohol is used to winterize (soaking the extract in alcohol and freezing it in order to separate the residual products) and butane is used to de-wax, or extract, the cannabis oils.
Why is CO2 supercritical?
This supercritical property of CO2 is great for chemical extraction because it is “gentler” than other compounds and won’t cause damage or denaturing (making unfit for consumption).
What happens to CO2 after extraction?
And if you’re wondering about residual CO2 left over in the extract, don’t worry. Decreasing the pressure on the CO2 after the extraction process is complete allows the liquid CO2 molecules to turn back into a gas and evaporate into the atmosphere.
Where is supercritical CO2 sent?
The trichomes, terpenes, and other goodies are sent to a collection receptacle (“Extract” on the diagram above) while the supercritical CO2 is passed through a condenser (bottom left), where it is turned back into a liquid. This liquid is then sent to the storage tank where it can be used to restart the process.
Can you make cannabis concentrate with a CO2 machine?
Industrial concentrate makers can make pure cannabis extracts with the consistency of oil, shatter, budder or wax just as easily with the same CO2 machine simply by varying and fine tuning the temperature, pressure, solvent-to-feed ratio and the flow rate during the extraction process.
Why is CO2 used in cannabis extraction?
There are several reasons why CO2 is particularly useful within botanical extractions, namely with cannabis: 1 CO2 is a naturally occurring compound. It exists all around us and our bodies produce it. 2 As far as non-polar solvents are concerned, CO2 is among the safest. In fact, the FDA has labelled CO2 safe for industrial extractions, making it a much less controversial solvent than petroleum based hydrocarbons such as butane or propane. 3 The conditions that allow CO2 to change from a fluid state to a supercritical state can occur without having to exceed temperatures above 90°F, meaning there is less risk of compromising the natural volatile compounds found in cannabis. 4 CO2 is also unique in that its solubility will change with pressure, allowing for fractioning of the many different types of biomolecules available in cannabis strains. CO2 extraction can be used to pull various cannabinoids from the plant such as THCA, CBD, CBG, THCV as well as terpenes and other compounds.
What is CO2 extraction?
CO2 is also unique in that its solubility will change with pressure, allowing for fractioning of the many different types of biomolecules available in cannabis strains. CO2 extraction can be used to pull various cannabinoids from the plant such as THCA, CBD, CBG, THCV as well as terpenes and other compounds.
What temperature can CO2 change to?
The conditions that allow CO2 to change from a fluid state to a supercritical state can occur without having to exceed temperatures above 90°F, meaning there is less risk of compromising the natural volatile compounds found in cannabis.
When did the sc CO2 extraction start?
Supercritical (sc-CO2) extraction has been around for decades, appearing first in the 1980s and 90s as a cleaner and more viable alternative to other methods of separation and extraction. From the decaffeination of coffee and tea to the extraction of essential oils for perfumes, this process has become commonplace in many industries.
Is CO2 a solvent?
As far as non-polar solvents are concerned, CO2 is among the safest. In fact, the FDA has labelled CO2 safe for industrial extractions, making it a much less controversial solvent than petroleum based hydrocarbons such as butane or propane.
Can SC CO2 be refined?
Once a compound has been fractioned using sc-CO2, it can then be further modified and refined depending on the desired outcome. In order to create shelf stable and desirable products for the market, often refinement procedures such as winterization and distillation are incorporated as a secondary process.
Is CO2 safe for cannabis?
The range of CO2-based products can be much wider than other extraction methods when used to its fullest potential. While not always cost-effective, S FE using CO2 has proved to be one of the most versatile and safest methods of producing cannabis concentrates.
How is CO2 extracted?
CO2 oil is a full-spectrum cannabis oil that is extracted using a liquid CO2 (carbon dioxide) extraction process. Carbon dioxide is converted into a liquid by manipulating temperature and pressure. It’s then used to strip cannabis plant material of its potent trichomes.
What is distillate vape?
Distillate Vape Cartridges. Distillate is a cannabis extract that contains only very specific cannabis compounds. This oil is made through a complex extraction process that systematically strips away plant compounds one by one until what’s left is exactly what’s desired.
Do vape cartridges look the same?
While the cartridges may look the same, the contents can be quite different. It’s always important to know exactly what’s in a cartridge before trying to vape it. There are several different concentrated cannabis oils that can be found in vape carts.
Can you use live resin in vape carts?
This results in more terpenes being preserved in the final product, and a tastier concentrate overall. Although live resin is usually solid, it can also be liquified for use in vape carts. The sauce and diamonds mixture that usually makes up live resin can be heated up and converted into a liquid concentrate just perfect for use in vape carts.
