Amps, or amperes, are used to measure the amount of current flowing through your device. As it relates to vaporizers, you want to know how many amps are being pulled from your batteries. This is because your batteries are rated up to a specific amperage, beyond which you could be drawing too much current, potentially damaging the battery.
Full Answer
What are amps in a vaporizer?
What are Amps? Amps, or amperes, are used to measure the amount of current flowing through your device. As it relates to vaporizers, you want to know how many amps are being pulled from your batteries.
How do you calculate amps from a vape coil?
Using basic algebraic principles, you can easily plug in your voltage and divide by your coil resistance to get your amps. For instance, if you are vaping at around 10.5V with a 0.5-ohm coil, you’re looking at 10.5/0.5 = 21A.
What amps are safe for vape batteries?
The green range (0-10 amp) is safe for most batteries you’ll find at a vape shop The yellow range (10-20 amp) is safe for many Efest, Samsung, Sony, and LG batteries The orange range (20-30 amp) requires extreme caution, and should only be used for a select few batteries (like the Sony VTC5) The red range (30+ amps) is danger zone.
How many amps does an efest vape cell have?
Playing on the ignorance of the average vaper, Efest claims that many of their cells have a 35 amp CDR. Unfortunately, no such cells exist. Tests indicate that these are closer to 20-Amps (if that).
What should Amp be on vape?
Using basic algebraic principles, you can easily plug in your voltage and divide by your coil resistance to get your amps. For instance, if you are vaping at around 10.5V with a 0.5-ohm coil, you're looking at 10.5/0.5 = 21A. Now, check your battery. If it is rated at 21A or above, you're good to go.
What settings should my vape be on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
Is it better to vape higher or lower wattage?
Basically, a higher wattage is needed to produce the right amount of vapor. -Pod systems are less about lots of vapor, and more about a satisfying nicotine hit – that's why they're made for mouth-to-lung vaping, which introduces a smaller amount of vapor into the mouth before it's inhaled.
How many amps is a vape pen?
Mah Explained Generally a vape pen battery will provide between 280-900 mah. The high rating of a 900 mah is normally reserved for high voltage or high resistance kits such as a wax pen battery.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
How do I get the best flavor out of my vape?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
Why does my vape burn my throat?
Volatile Organic Compounds and Diacetyl. Vaping juices may contain volatile organic compounds or diacetyl, both of which are known to cause throat irritation. 10 If you are experiencing a sore throat, changing products or quitting vaping may help relieve your symptoms.
Does higher wattage mean more flavor?
If you want a stronger or smoother flavour: Higher wattages are ideal for sweeter and creamy flavoured e-liquids, whereas lower wattages work best for menthol flavourings. By tailoring your vape wattage to suit specific flavours, you will be able to enhance the flavours and get more out of your vaping experience.
What happens if wattage is too high vape?
When a vape coil is run at a higher wattage, it's able to create more vapour, thus giving you more nicotine per puff. This also means that the throat hit from your nicotine and PG is increased as well.
Do amps matter in a regulated mod?
A regulated mod will draw less amps from its battery/batteries at full charge vs cut off voltage, which is why it is safest to use cut off voltage.
How many watts should I vape a cartridge?
What's the Best Wattage to Vape? The best wattage for beginners is between 40-50 watts. Just like variable voltage, an adjustable watt vape battery can be altered to a higher or lower wattage to suit individual preferences.
Can you vape at a lower wattage?
Setting your vape to a lower wattage is okay. You can still have a taste of the flavor of the juice, but not like the depth of flavors with a higher wattage. You can achieve a pretty decent vape experience at 10 watts.
What mAH, Amps, Watts, Volts, and Ohms Mean for your Vape
mAH: means milli ampere hour, it is the measure of the energy storage capability of the battery. For example, if the battery you have is rated at 1000mAH, it would than be capable of delivering 1000mA for 1 hour.
In case you slept through your high school science classes, here is a quick refresher on electrical terms
mAH: means milli ampere hour, it is the measure of the energy storage capability of the battery. For example, if the battery you have is rated at 1000mAH, it would than be capable of delivering 1000mA for 1 hour.
How many volts does a vape battery have?
They provide nominally 3.7 volts of power, 4.2 volts when fully charged and slowly discharge when used. Once the vape battery is discharged below approx 3 volts, they must be charged again.
What is the circuit board on a vape battery?
Batteries have a small circuit board, usually on the bottom of the vape battery, that stops the charging or discharge of the battery in certain circumstances, such as Over-Charge, Over-Discharge and Short-Circuit. These tend to be slightly longer because of the circuitry and are normally classed as ICR.
What is the anode of a vape battery?
Most external vape batteries are Lithium Iron (li-ion) and consist of three parts: the cathode (+), the anode (-), and the electrolyte (bit in the middle). The anode of all 18650 li-ion batteries is basically the same; carbon/silicon and graphite.
What is the difference between a mechanical and regulated mod?
A mechanical mod takes power DIRECTLY from the vape battery, which means it’s important to know that the battery is capable of providing the current required to fire the coil.
How many charges does a vape battery need?
Approximate number of recharges a vape battery can undergo before it’ll no longer hold a charge. Duty cycles can be as high as 500 charges but will vary depending on the specific battery type.
Do vape batteries have higher discharge rating?
This makes them more suitable for lower wattage devices. On the flip-side, a vape battery with lower Milliamp Hours will tend to have a higher discharge rating (higher Amperage). And you guessed it, this makes them more suitable for higher wattage devices. There is always a compromise between the two.
Can you use a vape mod while charging?
Once the vape battery is no longer chargeable or breaks, the mod becomes useless! It’s also worth mentioning, you’re unable to use the mod while charging unless it has a ‘pass-through’ facility.
Is vaping safe?
Battery safety is potentially the single most important aspect of vaping, regardless of the vaping device or setup you’re using. The good news is that VAPING IS SAFE as long as you understand battery safety ….
Can you use batteries with a lower CDR rating?
This is to make sure the batteries you use can safely deliver the power needed to vape at the maximum wattage available from your device. If you only plan on using a fraction of your mod’s available power, you could potentially use batteries with a lower CDR rating.
What does wattage mean in vaping?
To put it another way, watts is essentially how much power your vape produces and voltage is how much power is put through the device. So, as you increase the wattage the voltage also increases and vice versa.
What is a vape device?
Vape devices use simple circuits that contain a battery, a switch and a heating coil. The circuit is effectively a controlled short, with the power output from the battery used to create heat.
How to get the perfect vape experience?
After all, with most entry-level vape kits, all you need to do is: Check what wattage you can use with the coil in your device. Adjust your wattage and airflow until you get the vapour, flavour and throat hit you need. Some people want to know more to get the perfect vaping experience.
Why do vapes burn out faster?
You will need to increase the voltage to increase the wattage and get a better vape. Because lower resistance coils use more wattage, they tend to generate more heat. This means they often burn out quicker than a higher resistance coil would.
What is the resistance of a sub ohm coil?
The term sub-ohm, while still used, is not as relevant as it used to be. Coils below 1 ohm are common, and coils with a resistance of 0.8 ohms are often used for Mouth-to-Lung vaping. Even lower resistance coils, such as 0.15 coils, are often used for cloud vaping.
How does variable wattage work?
The variable wattage device will then automatically adjust the power going through the atomiser (the voltage) to produce the power output you need (the wattage).
What affects vapour and throat hit?
The resistance of your coil is not the only thing that affects vapour, flavour and throat hit. It also depends on the amount of power flowing through your coil. There are two common types of vape batteries which allow different amounts of power to flow through your coil. These are variable voltage and variable wattage.
What is sub ohm vaping?
Sub-ohm vaping is exactly what it sounds like, vaping with a resistance of less than one ohm. At one point, sub-ohm vaping was seen as all the rage. At sub-ohm levels, you can get more power, more vapor, and more heat. Today, sub-ohm vaping is fairly standardized.
What is voltage in atomizer?
Voltage is defined as the difference in electric potential between two points. This tension or pressure forces the electrons to flow from the negative terminal of a battery to the positive one creating an electric current that powers the atomizer or heating element.
What voltage is an 18650 battery?
18650 batteries from most reputable e-cig brands range from 3.7V to 4.3V. While simpler devices usually fire at 3.7V, you can also find certain vape pens with variable voltage. A variable voltage vape pen will allow you to change the voltage according to your preferences.
How are voltage and wattage related?
Voltage and wattage are closely related, and either way you’re changing the power level. However, in one case you’re changing the input, and in the other case, you’re changing the output. You might think of variable voltage and variable wattage like you would a manual and automatic transmission.
How to shift voltage and wattage?
To shift between voltage and wattage, you can use the following formula W=V^2/R, or , the wattage is equal to the voltage squared divided by the resistance. You could also say that the voltage is equal to the square root of the wattage multiplied by the resistance. So, if you have a voltage of 4.0V and a resistance of 1.0Ω, you’d be vaping on 16W.
How many batteries are needed for a box mod?
Box mods from most e-cigarette brands require multiple 18650 batteries. When using two batteries, the voltage will double, but the capacity will remain the same. So, if both of your batteries have 20 amps, the machine as a whole will still run on a current of 20 amps even if it’s using two batteries instead of one.
What does voltage mean in a water pipe?
If you take a pipe and run water through it, the voltage would represent the amount of water pressure in the tube. By increasing the amount of water in the tube or decreasing the size of the pipe, you increase the water pressure. 18650 batteries from most reputable e-cig brands range from 3.7V to 4.3V.
What is a vaporizer battery?
A vaporizer battery is nothing special. It’s nearly identical to the battery you keep in your pocket year-round, inches away from your genitals. I’m talking about the lithium ion in your cellphone. The same type of battery you’ll find in your laptop. And your tablet.
What is a LiPo battery?
Then there’s the LiPo (Lithium Polymer), which can be found in many DNA devices (like the VaporShark or Lavabox). These battery packs stack multiple lithium ion cells in a protective polymer casing. They can also be found in cordless phones, RC cars, and power tools.
What is a smartphone lithium ion?
Your smartphone uses a custom-designed lithium ion, chosen specially to meet the physical demands of the device. It is tested thousands and thousands of times in the most stressful conditions your phone can produce. And then it’s tested some more.
Can you push a battery past its amp limit?
Exceeding amp limits: there is no reliable method for your device to check your battery’s amp limit. So there’s nothing preventing you from pushing your battery past its safe limits. It is your responsibility to choose a battery that can handle the current required by your vaporizer.
DrMA Ultra Member ECF Veteran
There are many factors determining the qualities of the vapor, but IMO the one that best answers the OP is the coil area-weighted energy density, expressed in units of energy (W) per area (mm²).
keepsmiling Vaping Master Verified Member ECF Veteran
Now, if they were water hoses they would both fill a bucket at the same rate...but if someone were to spray you with both of those different hoses individually do you think you would be able to tell them apart?
Bunnykiller ECF Guru Verified Member ECF Veteran
yes it matters.... consider you have 2 batteries both with the same voltage, but with different amp ratings. Lets say one was a 1 A rating and a second has a 30A rating.
dr g Moved On ECF Veteran
In the OP example, assuming both coils are made from the same wire, the 3Ω coil will have a much larger surface than the 0.25Ω, but only the same total energy delivered from the battery. The larger coil will have a much lower energy density, thus perform weaker than the subohm coil.
beckdg ECF Guru Verified Member ECF Veteran
Since they both result in the same amount of power going to the coil, just being achieved in different ways, the only difference is the amperage being pulled from your battery in either case.
dr g Moved On ECF Veteran
ok so now we've got a divergent opinion on the matter. This is what seems to always occur, leaving me without a unanimous decision on the subject to put my curiosity as well as my insecurity on the validity of my percipiency of the subject, to rest
RedBeard4081 Full Member
It's not really a divergent opinion. You may be under the mistaken impression that output amps on a regulated circuit are the same as input amps. For example in your original post, your 13v unit can only be achieved with the same battery as the 4v example via a boost circuit.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
What is sub ohm tank?
Sub-Ohm tanks are designed to produce more clouds. They do this by having a lower resistance (0.2ohms, for instance), and this allows for less electrical resistance which in turn allows for more signal to flow to the atomizer.
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
