How does temperature affect vape wire resistance?
When you vape with Kanthal (the most popular vape wire), that resistance value doesn’t change. That’s a particular property of Kanthal: its resistance is static regardless of its temperature. For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises.
How does a vape mod work?
The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature. Think of it as a car traveling in cruise control. To maintain a speed, more power is needed to go up a hill than down a hill… but the speed would stay the same. First and foremost, a vape mod that supports TC.
What should I expect from a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
What is variable wattage vaping mode?
The variable wattage vaping mode makes it easy. When you use your mod’s variable wattage mode, your device may also offer selectable preheating strengths such as “Soft,” “Normal” and “Hard.” The preheating strength controls how quickly the device reaches the target wattage.
What is power mode in vaping?
With Power Mode, you will be setting the amount of total power going directly to the coil. Wattage (likely the most used setting among vapers) is the unit used to express power per second, while voltage refers to the force of that power.
What's the best setting for my vape?
Low-temperature vaping is the top recommendation for vape pens. It has a better flavor and it's safer, having less impact on your lungs. Low-temp vaping is usually set at 374℉. This setting produces a thinner vapor than higher temperatures.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What is TC mode vape?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
How do you cure Vapers tongue?
Change the flavour - the simplest solution; swap your vape juice every so often. By simply changing the flavour you vape and returning to it after a couple of weeks, can help fend off vaper's tongue and keep the taste fresh.
Is it better to vape at lower wattage?
However, if you are looking for a smoother vaping experience, it is worth reducing the wattage on your vape device. Bear in mind that battery life is also decreased by continually vaping at the highest wattage setting. If you are a frequent vaper, make sure you are charging your battery well or using back-ups.
Does higher wattage mean more flavor?
Wattage for sure can impact flavor, as higher wattages can produce a stronger flavor. That can be a good or bad thing depending on your tastes and the flavor of the e-liquid itself.
What makes big clouds vape?
For big clouds, choose an e-liquid with a 50/50 PG/VG ratio, or higher VG. High PG e-liquids are not good for producing lots of vapour and can be quite harsh on your throat. E-liquid strength is also important when using lower resistances.
What is NI TI and SS?
Stainless steel (SS), nickel (NI), and TI (titanium) are all wire materials. With the exception of stainless steel, which can be used in wattage mode and SS mode, they should only be used in those mods that correspond to them. They allow you to limit the temperature you vape at.
What is wattage mode?
Variable wattage mode is also referred to as watt mode or power mode, and allows you to choose the output power of your mod in watts. This is the standard mode for most kits, and it lets you tweak your wattage level gradually to find your perfect vape.
What is TCR mode?
The Temperature Coefficient of Resistance (TCR) This specific TCR value of the wire is kept in mind by the vape mod, allowing it to adjust the amount of power being sent to the coil and thus control the temperature.
What is temperature control on a vape?
Temperature control has been offered for vapes for some time, but many of us rely on simple wattage or voltage adjustments for our vaping outputs. Working in conjunction with nickel, titanium, and stainless steel wires, temperature control is technically a temperature limiting mode, checking the resistance of the wire and adjusting or cutting off the delivery of electricity to the heating element to ensure the temperature does not exceed the temperature value set. This allows the mod to prevent excessive temperatures that would otherwise cause the cotton to burn while ensuring that only eJuice is vaporized. The output is carefully calculated and adjusted to maintain the temperature of the coil. Temperature Control can be found on many vapes, with the Snowwolf Zephyr and the Uwell Nunchaku Kits being a great example of an easy to use TC Mode.
What is curve mode on a vape?
Curve Mode is a set choreographed performance of the output value. Set somewhere between variable wattage and temperature control, curve mode allows for wattage outputs to be preset, mapped, and guided by the user. For example, some vapers may like the coil to initially hit hard, firing at 50W for the first second, dropping to 45W after half a second and then a further drop to 40W after another half second for a smoother finish. This gives a personalized feel to output, allowing the user to set a preference to how they take a draw of the vape, resulting in a less harsh or stronger output depending on the mapped settings. An example of Curve Mode cann be found in the Innokin MVP5 AJAX Box Mod.
What wires can be used in TCR mode?
KA wire does not reliably change, therefore, TCR Mode should only be used with consistent nickel, titanium, or stainless steel wire compositions for reliable and accurate performance. A prime example of TCR Mode can be found on the Geek Vape Aegis Legend Box Mod.
What is TCR mode?
The TCR Mode setting assigns a value to each type of wire composition and adjusts the power supplied to ensure the temperature coefficient does not exceed the preset value.
How does pulse mode work?
Pulse Mode works by constantly cutting off and sending current to the coil repeatedly to control the output of the vape. Intelligent chipsets within allow for this, as they can constantly adjust the input power multiple times within a second. This ensures the coil never heats past a set value, instead pulsing the coil to control the output. Similar to curve mode, but is not choreographed or mapped. The Vaporesso GEN Starter Kit is a great example of an easy to use Pulse Mode.
Can you vape without knowledge?
Vaping is a niche that entails many things. Sure there are simple disposable vapes that can be used without intimate knowledge or expertise . However, with the technological advances in the industry, vaping can be more finely tuned than smoking, offering various modes of operation for vaping outputs. Many of these modes can be adjusted by connecting the mod to a computer, but some models allow for the adjustments to take place solely on the mod itself, thanks to an intelligent chipset.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
How does TC vaping work?
For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises. The mod checks the resistance of the coil at room temperature, then it continues to monitor it as you vape. The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature. Think of it as a car traveling in cruise control. To maintain a speed, more power is needed to go up a hill than down a hill… but the speed would stay the same.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What is TC in vape mods?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C). The power sent to the coil then automatically adjusts to keep the coil—and your vape—at the chosen temperature.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
How to install coils on a mod?
Install the coil as normal but take care to ensure it is screwed down tightly, as far as it can be. In the case of rebuildables, make sure the leads are trapped firmly. Then put the atomizer or tank on the mod, and again make sure that it’s tightened down as far as possible (but don’t go crazy with over-tightening). Check that the resistance is reading accurately and lock the resistance if applicable (typically by pressing the +/- buttons).
How to fix dryness in vape?
When vaping in TC, if you do notice any dryness when you’re low on juice, adjust the temperature down. If your mod has wattage control in TC, you can adjust that too. Higher is usually fine, but don’t go too low; as mentioned earlier, your mod should limit your wattage when the set temp is reached, but it won’t compensate when the wattage is set too low.
How Does Temperature Control Vaping Work?
The purpose of TC vaping is to limit the temperature of the coil in your vape tank, thus minimizing the chance of a burnt wick or dry hit. When you use temperature control mode, you define the maximum temperature that your coil should be allowed to reach. Your mod then monitors the coil temperature as you vape.
What Happens When You Put Your Mod in Temperature Control Mode?
When you put your mod in TC mode, you’ll need to configure two things: the maximum temperature that the coil will be allowed to reach and the “preheating wattage,” which basically determines how quickly the coil will reach that temperature.
What Equipment Do You Need for TC Vaping?
To vape in TC mode, you need two things. The first item – as you probably already guessed – is a vape mod that supports temperature control vaping. As we mentioned above, temperature control is a feature that’s implemented in firmware.
What Are the Pros and Cons of Temperature Control Vaping?
Let’s talk now about the experience of using a TC vape mod in temperature control mode. TC vaping definitely has its benefits, and there are definitely plenty of people who prefer temperature control over wattage-based vaping.
