Full Answer
What are vape coils?
Also known as atomiser heads, or clearomisers; vape coils describe the element and mechanism that converts energy from your battery. The coil heats your e-liquid into a vaporised state ready for you to inhale. Found within your e-liquid tank or the casing of a profiled e-liquid cartridge - without a vape coil, you wouldn't be able to vape.
Why are e-cig coils becoming replaceable?
Companies which are known to manufacture e-cigarette have tapped into the increasing demand by producing replaceable e-cig coils. This is because the initial vape coils were irreplaceable, and one would have to throw away the e-cigarette after finishing it.
How to measure the resistance of an e-cig coil?
Place the black ending to the outer part of the atomizer while the red ending on the inner part of the atomizer. Then take your reading. Then with both readings in hand, you can use them to calculate the resistance of your e-cigarette coil.
What kind of e-liquid should I use with my vape coils?
The kind of e-liquid you use with specific vape coils differs with each vaper. Propylene Glycol (PG) and Vegetable Glycerine (VG) are the dominant liquids used as carriers for the nicotine in your e-liquid. Each has different thicknesses that will react differently to the temperatures achieved by your vape coils.
What is the best coil resistance for vaping?
The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5. This standard level tends to offer the most consistent level for your vape.
How do I know what coil to use in my vape?
The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire. You'd then measure this resistance with the help of an Ohmmeter. Low resistance coils produce warmer vapour and larger clouds, whereas high resistance coils produce a cooler vape with less current.
What do vape coil numbers mean?
What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.
What ohm coil gives the best flavor?
The best ones to go for flavour wise are clapton, titanium (if you prefer vaping with TC mode) or an Alien coil. The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
What is the difference between a 0.6 and 1.2 coil?
The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
Which coil is best for salt Nic?
1.0ohmMost Nic Salt e-liquids will typically be available in high strengths only, most commonly 11 and 20mg. As such it is recommended that you try to use a device with a coil rating of 1.0ohm or higher. Most MTL (mouth-to-lung) style vaping devices will be well suited to Nic Salts such as the LiQuid Pro.
What settings should my vape be on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What is the best wattage to vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What is the best wattage for a 1.2 ohm coil?
between 10-12 wattsA 1.2ohm coil is perfect for mouth-to-lung vaping and performs especially well when paired with the elongated drip tip option and used between 10-12 watts. A second coil is rated at 0.4ohm and provides a loose, airy draw which mimics that of a sub ohm device.
What coil is best for high VG?
As it is a thicker substance, high VG vape juice should be used with low resistance coils with large wicking areas. This will allow the e-liquid to be absorbed properly and create the best vape.
What does TCR mean on a vape?
Temperature Coefficient of ResistanceThe Temperature Coefficient of Resistance (TCR) This specific TCR value of the wire is kept in mind by the vape mod, allowing it to adjust the amount of power being sent to the coil and thus control the temperature.
Why can't I taste the flavor in my vape?
Vaping can sometimes cause a dry mouth simply by requiring so much mouth breathing (inhaling a vape), which can dry up saliva. When we don't have enough saliva, the ability to taste is almost non-existent. Flavor fatigue is another culprit behind vape tongue resulting in you not tasting your e-juice.
Eleaf EC Replacement Coils
The Eleaf EC Replacement Coils combines the ease of ready to made EC coils with enlarged wicking ports for maximal vapor capability, all at an affordable price point.
Ratings & Reviews
The products available on Element Vape are age-restricted and intended for adults of legal smoking age only. All orders placed on the website will be verified by an industry leading Age Verification software for validation.
How do vape coils work?
Coils, which are sometimes referred to as atomisers, are the component of your vaping device that creates vapour.
What are the different types of coil?
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette.
DuoPrime – a new era for coil design
At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption.
How to change coil on vape?
However, these general rules will enable you to change your vape coil like a pro: Remove the e-liquid tank from the battery. Turn the tank upside down and unscrew the cap found on the bottom. Carefully unscrew the coil head from the cap and replace with your new coil.
What material is used to make vape coils?
Let's take a quick look at some of the materials used to make vape coils and how they might affect your vape: Ceramic: A porous material - ceramic coils are known to enhance the flavour of your vape compared to other materials used to produce vape coils.
What is Kanthal coil?
A hardy material with excellent resistance to high temperatures. Kanthal: Made from a combination of aluminium, iron and chromium, kanthal vape coils are particularly suited to high wattage vape mods. With a super quick heat up time, expect some serious vapour production.
How long should I wait to fill my vape coil?
Priming your vape coil is easy and straightforward. Simply fill your tank with e-liquid and allow the tank to stand for anywhere between 5 and 30 minutes - the longer the better! Your other option is to manually soak the wicking material through the openings in the atomiser head. A few drops should be enough.
How to get vape coils to taste fresh?
Cleaning your vape coil is easy and will quickly restore your vape coil to a state that enables your vape to taste fresh, clean and more enjoyable. Follow the simple steps found below to regain flavour: Remove your vape coil, including wicking material from the coil head and place into a small bowl of warm water.
What is a vape pod?
For instance; if you're talking about an e-cig, vape pen, or vape pod, all are vaporisers intended for use with e-liquids or cartridges. Similar to other vaping components, vape coils are just one of the names given. Also known as atomiser heads, or clearomisers; vape coils describe the element and mechanism that converts energy from your battery.
Why is a low resistance coil used for sub ohm vaping?
A low resistance coil used for Sub-Ohm vaping will use more power, potentially impacting the battery life of your device. Because you're using more energy, you'll consequently heat your e-liquid to a hotter temperature. This creates some fairly sizeable vapour clouds.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
What are the ingredients in e-liquid?
The two main ingredients of e-liquid are VG (Vegetable Glycerin) and Propylene Glycol (PG), which are both widely found in food and medicine. The levels of VG and PG will always add up to 100%, for example, 70% VG / 30% PG or 50% VG / 50% PG.
What is coil ohms?
What are Coil OHMS? The ohm (represented by the Ω symbol) is a measure of resistance that determines the amount of heat your coil generates. Coils resistances very from vape to vape. Vape devices will also have some internal resistance. This must be added to the coil ohm resistance to get your total resistance.
What are the different ohms for a coil pens?
The Most Common Coil Ohm Types. Vape pens can come in different Ohm classes: Standard-ohm, Low-ohm, and sub-ohm. Here we compare the drawbacks and benefits to each type.
How much power does a sub ohm vape use?
Sub-ohm (Best for Cloud Chasers) - Recomended. Sub ohm vape pens are less than 1 ohm: hence the term "Sub-ohm". Sub-ohm vapes use a ton of power: typically 40 watts and up, sometimes exceeding 200W! On most units you can also crank down the voltage and get standard ohm hits. 0<1 less than one-ohm standard.
Does an adjustable vape pen increase wattage?
If you have an adjustable vape pen a higher voltage will increase your wattage, drain your e-liquid supply and reduce battery life. The benefit, however, is more smoke and more flavor (although some flavors do better at a lower power setting.)
Can you use sub ohm coils?
Improper coil matching can damage your power supply. "Sub-ohm vapes" are not considered Sub-ohm unless they carry high wattage/power as well, some low powered devices carry Sub-ohm coils but are considered standard - they barely produce smoke.
How Do Vape Coils Work?
- Coils, which are sometimes referred to as atomisers, are the component of your vaping device that creates vapour. They are made of three components: the heating element, wicking material and casing. The casing of a coil simply holds everything together and allows for the coil to be easily installed in your tank or pod. The wicking material, typical...
What Are The Different Types of Coil?
- MTL/”mouth-to-lung” coil
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette. Yo… - DL/”direct-to-lung” coil
DL or “direct-to-lung” coils are designed to accommodate high power, large airflow and massive vapour production. These days, most DL coils use strips of mesh instead of traditional round wire. You can identify a coil head that’s intended for DL vaping by looking at the diameter of the coil in…
Round Wire vs Mesh – What’s The difference?
- Traditional round wire coils and coils made using mesh strips are both extremely common, but what’s the difference and which one is right for you? Typically, round wire is used for lower-wattage coil heads. This is because they perform very well at low temperatures. Also, the manufacturer can easily tweak performance by changing the wire thickness or number of wraps…
Duoprime – A New Era For Coil Design
- At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption. What if there was a way to increase wicking efficiency even more using mesh strips? With this in mind, our engineers designed DuoPrime technology. DuoPrime works by implanting an outer layer of mesh between …