Electronic cigarette
An electronic cigarette or e-cigarette is a handheld battery-powered vaporizer that simulates smoking by providing some of the behavioral aspects of smoking, including the hand-to-mouth action of smoking, but without burning tobacco. Using an e-cigarette is known as "vaping" and the user is ref…
What does No atomizer mean on vape?
May 25, 2021 · Sometimes the reason you see the “No Atomizer” message is because there is a problem with the coil. To check the coil for issues, you’ll first want to clean it. To do this, you’ll have to take the tank apart as if you were changing the coil. Once you have the coil by itself, you’ll want to clean with a paper towel the threading at the bottom to connect with the tank and the …
What to do when your vape says check atomizer?
Jun 22, 2020 · “Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or …
Why does my vape say check atomizer?
If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark.
How to fix atomizer on vape?
Sep 09, 2020 · If you press the firing button on your e-cig and you see the message ‘no atomizer’ or ‘check atomizer’ it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.
What causes a check atomizer short?
Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.
Why does my mod read "Check Atomizer"?
Over time, dirt, dust, and ejuice can collect in your 510 connector and this can cause your mod to read Check Atomizer/No Atomizer. Start by removing the tank from the mod and inspect the threading where the tank screws in for dirt, dust, or ejuice. Do the same with the 510 connector on your mod.
What to do if cleaning contact points doesn't fix check atomizer error?
If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates on your pod vape and on your pod for damage.
What is a versed vaper?
The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!
What happens if your RDA is too low?
If your build resistance on your RDA is too low some mods will deliver an error message. This is a safety feature on some mods and it’s there to keep you safe. You should always be using an Ohm reader or regulated mod to build your coils. But more importantly, you should always know Ohm’s Law and practice proper battery safety.
Why is my vape not recognizing my atomizer?
If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark. Take a close look at all the connection points on your device, clean them off, and make any adjustments to complete the current.
What is a vaporizer?
A vaporizer is an electronic device, containing a battery that creates a very real electrical current. Above all, your safety should be your top priority. It’s easy enough to get a new atomizer or vape if yours has turned into a dud, but recovering from an injury that resulted from an overconfident, uninformed repair attempt is a much larger order.
How to avoid vaping issues?
Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape. Cleaning your vape isn’t difficult, and takes just a few moments of your day.
How long does it take to read a vaporizer?
Reading Time: 4 minutes . Your vaporizer is a lot like your car: you count on it on a daily basis, it’s a critical part of your everyday routine, and you hope to avoid issues at all costs. However, just like a vehicle, vaporizers do run into mechanical problems every now and then.
Try another vape tank or vape mod
So, you have the ‘check atomizer’ message, but we first need to find out if the problem lies within the tank or the mod. If you have them available, we need to try another tank and mod. This is the quickest method to determine where the problem lies.
Check your vape coil
Let us start simple. The number one cause of a ‘check atomizer’ message is your coil.
510 connections on your e-cig
There two points within your e-cig that have to meet properly and make a connection. This allows power to pass between your e-cig mod and tank.
Clean the 510 connection on your vape mod
If you have done the first test and another tank on your vape mod is showing the same message, this would indicate that the problem is your e-cig battery or mod. The chances are this is an easy fix.
Clean the 510 connection on your vape tank
So, we have cleaned the connection on your vape mod, now we need to look at the bottom of your vape tank.
Check the 510 connection on your tank
Even though you have cleaned the 510 connection on your tank, there is a chance that it might need a little bit more love.
Check the 510 connection on your vape mod
Just like the 510 connection on your tank, the one on your mod can also suffer if your tank has been screwed on too tight.
Why does my mod say no atomizer?
However, once you put your top cap on, the sides are touching the coil (usually because it’s either too large or protrudes to one side too much), and that causes your mod to show you a “no atomizer” or “short atomizer” error message.
Why do vapers forget atomizer error messages?
They were added by the manufacturer to protect you from faulty atomizers, and to prevent firing mishaps that can cause damage or injury.
Why does my vape pen leak?
There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. When juice seeps into your circuitry, it can damage it and cause it to show error messages when there’s actually nothing wrong with the atomizer.
What is 510 connection?
In short, a tank’s 510 connection is that little bit with threads that protrudes and is screwed onto a vaporizer. It has a little pin that’s movable and that carries the positive charge from the vaporizer to the atomizer. It’s that little pin that can go haywire sometimes, and fail to connect.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
What is a built in microchip?
There is a built-in microchip that has been programmed to detect when your coil or pod is attached to the device. If your pod and coil are attached to the device and there is a connection issue, this warning will display. When this happens you will not be able to use the device.
