How to choose the right replacement vape coils?
When choosing the right replacement vape coil, resistance is key. Resistance allows you to customize your vape to your exact preference. Lower resistance coils give you a higher current and a hotter coil, which translates to warmer and more voluptuous vapors. Higher resistance coils give you a cooler vape experience.
How long do vape coils last?
If you vape a lot, your vape coils may only last about 5-7 days. If you vape occasionally, it may last you a few weeks. And finally, if you're a really light vaper you could probably only change out your coils once a month or less.
How do vape coils work?
It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs the e-liquid held in your vape tank.
What is the difference between high resistance and low resistance vape coils?
So coils with a lower resistance will require a higher power output, and a higher Amp output, just like a wider pipe will need a higher water pressure and increased flow of water to work properly. Conversely, a higher resistance coil requires a lower power output and a lower Amp output. WHAT ARE THE DIFFERENT KINDS OF VAPE COIL?
What does the coil number mean on a vape?
What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.
How do I choose a coil for my vape?
Lower resistance coils (e.g. 0.10ohm, 0.15ohm, 0.2ohm, 0.5ohm) are coils that draw heaps of power and are better for massive vapour clouds. Lower resistance coils will drain your battery faster, but deliver more vapour, so you get a better flavour and effectively get more nicotine in each draw.
What does a higher resistance coil mean?
The difference between the two is the resistance and the method of vaping you use - standard coils have a higher resistance meaning less charge and juice pass through them, Sub Ohm coils have a lower resistance, less than 1.0ohms, meaning more current can go through.
How do you prime a new vape coil?
To prime a new coil, simply fill your tank with e liquid and leave it to stand for a few minutes before vaping. As above, this will allow the cotton inside your new coil to absorb plenty of e-liquid ready for that first, tasty vape.
What wattage should I be vaping at?
What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage. By and large, though, we could say vaping starts to get more exciting between the range of 40 and 50 watts.
What is the difference between a 0.6 and 1.2 coil?
The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
What is the best coil resistance for vaping?
The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5. This standard level tends to offer the most consistent level for your vape.
What resistance coil is best for flavor?
Coils With a Rating At 1.0 Ohm or Above Coils with at least 1.0 ohm resistance are designed for 'mouth-to-lung' vaping. They produce a subtle, cool vapour with intense flavour.
What is the best coils for flavor?
The best ones to go for flavour wise are clapton, titanium (if you prefer vaping with TC mode) or an Alien coil. The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
How do you break in a new coil?
Here is how to make coils last longer by breaking them in gradually:When you start vaping, set the wattage to the lowest recommended setting.Take a few short vapes to slowly start to break in the coil.Increase the power by 5 watts.Take three normal vapes and increase power by 5 watts.More items...•
Why does my vape taste burnt even with a new coil?
That burnt taste can occur if there's not enough e-liquid on the wick inside your atomizer coil. The wick is the part of your device that soaks up the e-liquid, which is then turned into vapour when the coil heats up.
What happens if you don't prime a coil?
What if I didn't prime my coil and it's burnt? Unfortunately, if you didn't prime your atomizer / coil properly and your wicking material is burnt, there is no way to bring it back. That taste will stay until you change your atomizer head containing a new coil.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
What are the ingredients in e-liquid?
The two main ingredients of e-liquid are VG (Vegetable Glycerin) and Propylene Glycol (PG), which are both widely found in food and medicine. The levels of VG and PG will always add up to 100%, for example, 70% VG / 30% PG or 50% VG / 50% PG.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
What happens when you press a button?
When you press your button, it provides power to the coil. This then converts that energy to heat (If you could see your coils, they sometimes glow red when you are pressing your button), and vapourises e-liquid from the saturated wicking material.
Do you need to worry about Ohm's law?
If you vape a regulated e-cig, for example an arc 5 or Optimus, you do not need to worry about Ohm’s law as the device sorts this for you. If you use an unregulated e-cig, such as a mechanical mod then you need to be aware of Ohm’s law and battery safety.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
How to change coil on vape?
However, these general rules will enable you to change your vape coil like a pro: Remove the e-liquid tank from the battery. Turn the tank upside down and unscrew the cap found on the bottom. Carefully unscrew the coil head from the cap and replace with your new coil.
How to get vape coils to taste fresh?
Cleaning your vape coil is easy and will quickly restore your vape coil to a state that enables your vape to taste fresh, clean and more enjoyable. Follow the simple steps found below to regain flavour: Remove your vape coil, including wicking material from the coil head and place into a small bowl of warm water.
What is Kanthal coil?
A hardy material with excellent resistance to high temperatures. Kanthal: Made from a combination of aluminium, iron and chromium, kanthal vape coils are particularly suited to high wattage vape mods. With a super quick heat up time, expect some serious vapour production.
What material is used to make vape coils?
Let's take a quick look at some of the materials used to make vape coils and how they might affect your vape: Ceramic: A porous material - ceramic coils are known to enhance the flavour of your vape compared to other materials used to produce vape coils.
How long should I wait to fill my vape coil?
Priming your vape coil is easy and straightforward. Simply fill your tank with e-liquid and allow the tank to stand for anywhere between 5 and 30 minutes - the longer the better! Your other option is to manually soak the wicking material through the openings in the atomiser head. A few drops should be enough.
What is a vape pod?
For instance; if you're talking about an e-cig, vape pen, or vape pod, all are vaporisers intended for use with e-liquids or cartridges. Similar to other vaping components, vape coils are just one of the names given. Also known as atomiser heads, or clearomisers; vape coils describe the element and mechanism that converts energy from your battery.
Why is a low resistance coil used for sub ohm vaping?
A low resistance coil used for Sub-Ohm vaping will use more power, potentially impacting the battery life of your device. Because you're using more energy, you'll consequently heat your e-liquid to a hotter temperature. This creates some fairly sizeable vapour clouds.
What is a vape coil?
The vape coil is an essential component of the vaping device, tasked with releasing flavorful, dense clouds. It usually consists of a wire and a wick and is mostly housed within the mod’s cartridge. The wick soaks up the e-juice and the coil, drawing power from the vape mod batteries, heats it to produce inhalable vapor.
How often should I change my vape coils?
If I were to provide an educated guess, a light vaper can go without changing a vape coil for a month. Meanwhile, a passionate vaper will need to change his/her coils every one to two weeks.
What happens if you burn your vape coil?
A worn-out or burnt vape coil can cause dry hits, low vapor production, and weak flavored hits. In worst cases, it can even give a hideous mixed taste of different flavors when you switch e-juices. So, check your coils regularly and replace them when the situation demands it.
Why is my vape leaking?
Leaking Vape Device. Using an old, worn-out coil can result in a leaking vape device. Of course, the leaks can be caused by other factors such as an overly filled tank, worn-out O-rings, or a wrongly filled e-juice. However, a worn-out coil is just as susceptible to causing the leaks.
Why does my vape make a gurgling sound?
However, do realize that the vape device usually produces a repulsive gurgling sound when the coil fails to perform its task properly. If the sound doesn’t fade away even after replacing the coil, it could be a sign that a bigger issue persists in your device. Simply put, a vaping device shouldn’t be making gurgling sounds.
Can you clean coils before you start cleaning?
If you want your coil to last a little longer, consider cleaning it. Unfortunately, not all coils can be cleaned, so check your device before you start any cleaning task. 2. Hollow Bubbling Sounds.
Can you discard coils before expiration?
You might be discar ding coils way too soon, long before their expiry date, or be using them beyond their effectiveness. Either way, you’d be either spending money on new coils far too often than necessary or buying new mods because of the destruction inflicted upon your vape mod by worn-out coils.
What is a Vape Coil?
The coil is arguably the most important component of any vaping device. The coil is connected directly to the battery of your device and when activated, heats the E-Liquid to produce vapour.
How Often Should You Change Your Vape Coil?
A brand new coil should last for up to two weeks. This is because the E-Liquid tends to leave a thin layer of residue on the coil when it’s been vaporised.
Signs You Should Change Your Vape Coil
While we’ve given you a recommended time frame of how often you should be changing your vape coil, this can vary from device to device for a variety of factors such as:
How to know when to change vape coil?
1. Experiencing a "Burnt" Taste in Your Mouth.
How long do vape coils last?
If you vape a lot, your vape coils may only last about 5-7 days. If you vape occasionally, it may last you a few weeks. And finally, if you're a really light vaper you could probably only change out your coils once a month or less.
Why does vaping taste burnt?
When you're vaping with a coil that needs replacing, you'll experience a burnt taste no matter what e-juice you use or what modifications you try to change. Once you sense this unpleasant taste, you need to make sure to replace your coil really quickly to avoid damaging other parts of your vaping device.
What is the difference between a lower resistance coil and a higher resistance coil?
Resistance allows you to customize your vape to your exact preference. Lower resistance coils give you a higher current and a hotter coil, which translates to warmer and more voluptuous vapors. Higher resistance coils give you a cooler vape experience.
Why do I have fewer clouds when I vape?
If you're noticing fewer clouds than usual, it's likely due to a bad coil. Fewer vapors affect your satisfaction level and rhythm you have while vaping so you will be able to notice this right away. Change the coil and this issue will likely go away instantly.
Do vape coils last forever?
Regardless of if you're a first-time vaper or more advanced, the time will come when you need to replace your vape coil. Unfortunately, they don't last forever and they need replacing quite frequently. The coil is ultimately responsible for heating the e-liquid and turning them into vapors for your pleasure.
Can an e-cigarette leak?
Oh no, no one wants a leaky e-cig! If there's a coil in your e-cigarette that's lived in there a little too long, leaky conditions could be a sign that it needs to pack up and head out. If these leaks continue, they can potentially cause major problems in other parts of your e-cig.