What is a vape juice?
Vape juice is the liquid used in electronic cigarettes that gets turned into vapor. It’s also referred to as: All vaping, no matter the size or look of the vape device, requires the presence of e-liquid to make vapor.
How are vaping e-liquid strengths written?
You may see vaping e-liquid strengths written as mg, mg/mL, or in percentage form. Here is how they are displayed to show the different nicotine levels: If you are vaping and have some e-liquid containing 1.2% nicotine, any amount you measure out will be 1.2% nicotine and 98.8% PG, VG, and flavorings.
What is the best nicotine strength for vape juice?
You can buy a vape juice with a nicotine strength as low as 3 mg/ml or as high as 50 mg/ml. Since one strength has more than 16 times as much nicotine as the other, you could end up consuming far too much nicotine than you should.
Should you vape at 0 or high strength?
If you don’t currently use nicotine, you may find the vaping experience harsh and the effect of the drug unsettling at high strength. (The same would be true for your first cigarette most likely.) If you are quitting nicotine products, or have never used them, 0mg strength is probably for you.
What strength vape should I use?
6mg/ml or 0.6% (Low) - suitable if you are smoking 5 to 10 a day. 12mg/ml or 1.2% (Medium) - suitable if you are smoking 10 to 15 a day. 18mg/ml or 1.8% (High) - suitable if you are smoking 15 to 20 a day. 20mg/ml or 2.0% (Very high) - suitable if you are smoking more than 20 a day.
Is 12mg vape juice strong?
12mg/mL Nicotine On the lower end of the spectrum, 12mg/ml is a comfortable level for people who prefer nicotine, but aren't heavy vapers. This level is also common for people who used to smoke light cigarettes. 18mg/ml Nicotine This is the middle of the road in terms of nicotine.
What's the difference between 50 50 and 80/20 vape juice?
They will give thicker more tasteful clouds, and will make your coils last longer. However these liquids will come with a higher price, as does everything that is high quality. 50/50 flavour is a very common ratio, and will most often be found in the cheaper more basic flavours.
What's the difference between 70/30 and 80/20 vape juice?
Like we said, the more vegetable glycerin in an e-liquid, the thicker the clouds will be. This is because VG is thicker, and so the clouds are denser as a result. This means that an 80/20 ratio of VG/PG is going to give you bigger clouds than a 70/30 VG/PG ratio.
Is 18mg vape strong?
It's a good place to start to get you used to vaping and will give you enough to keep the cravings away. 18mg nicotine through to 20mg nicotine - This is a high nicotine level for people who are getting through a serious number of cigarettes, by this we mean over a pack a day.
Is 50 mg of nicotine high?
50mg is considered the equivalent to the nicotine level that's in cigarettes, meaning that those who are used to smoking are more likely to feel satisfied after they vape due to the fact that they're getting about the same level of nicotine that they're used to.
Is 70/30 PG VG good?
70% VG/30% PG: (70/30) This is the best level for those who are interested in lots of vapor but still want to notice at least a little throat hit as well. 30/70 produces a smooth feeling that doesn't overpower them when inhaling, and big clouds when exhaling.
What's better high VG or PG?
PG carries flavor marginally better than VG, so the flavor will be slightly improved. Smoothness – High VG fluid tends to give a much smoother feeling on the throat, with a more substantial, 'thicker' mouthfeel.
How do I choose the right e-liquid?
As a general rule, consider choosing an e-liquid with 3mg of nicotine if you only smoke one or two cigarettes a day, 6mg if you smoke under 10 per day and want a little bit of throat hit, 12mg if you smoke up to and above 20 a day and18mg if you are a heavier smoker.
What's better 50 50 or 70/30 vape juice?
Aim for a 70:30 juice, while 50:50 are generally better for flavour in lower powered devices they'll be too harsh in a Sub ohm device.
Is 80 VG good?
80VG/20PG. Cloud chasers crave thick and bold clouds, which is why 80VG/20PG blends are so popular with this crowd. The ratio provides a subtle throat hit, but users will notice a decline in flavour. This combination creates a thicker liquid due to the high VG concentration, making it ideal for sub-ohm vapes.
What is the difference between 50 50 and 70 30 vape juice?
That's because most (but not all) e-liquids have a VG percentage of 50 or higher. For example, an e-liquid with a VG:PG of 50:50 will be 50% vegetable glycerine and 50% propylene glycol. An e-liquid with a VG:PG of 70:30 will contain 70% vegetable glycerine and 30% propylene glycol.
What Should I Do if I Want to Try Synthetic Nicotine Vape Juice?
If you’ve been browsing the selection here at VapeJuice.com, you may have noticed that we have an entirely new section of the site devoted to synthetic nicotine vape juice. We are strong supporters of tobacco-free nicotine, and we feel that the future of the entire vaping industry lies in synthetic nicotine. Many of the country’s vape juice makers feel the same way and are in the process of transitioning all of their products to tobacco-free nicotine. If you’d like to give synthetic nicotine e-liquid a try, you don’t have to worry about choosing between freebase nicotine and nicotine salt because synthetic nicotine vape juice is available with both types of nicotine. Simply buy your e-liquid according to the nicotine strength recommendations we’ve provided in this article.
What is the difference between a vape mod and a pod?
The biggest difference between larger devices like vape mods and smaller devices such as pod systems is the fact that the most powerful vaping devices are always designed for direct-to-lung inhaling. Because the clouds that you’ll get with a vape mod will be dramatically larger than the clouds that you’ll get with a smaller device, you’ll need to use an e-liquid with a much lower nicotine strength. Freebase nicotine e-liquidis usually the right choice for a smaller vaping device.
How to choose nicotine strength?
Choosing the right nicotine strength for your needs should always begin with examining the vapor production of your hardware. If you use a small device, you need to use a stronger e-liquid to compensate for the fact that your hardware produces smaller vapor clouds. Nicotine salt e-liquidis usually the best choice for smaller vaping devices.
Can you use freebase e-liquid with a vape mod?
Unless you purchased your device with the intention of pairing it with a small mouth-to-lung tank, freebase nicotine e-liquid is almost always the right e-liquid to use with a larger vape mod. That’s because your device produces very large vapor clouds, so you can have a completely satisfying vaping experience even if your e-liquid has a very low strength. Most freebase nicotine e-liquids are available in strengths of 3 mg/ml and 6 mg/ml. Here’s how to choose between them.
Can you vape with 6 mg nicotine?
If you have a smaller sub-ohm vape tank designed for a “restricted direct lung hit,” that’s another situation in which the 6 mg/ml nicotine strength may be appropriate.
How many nicotine strengths are there in e-juice?
That flavor of e-juice is available in half a dozen different nicotine strengths and you’ve no idea where to even begin!
Why is it important to switch from smoking to vaping?
In order to successfully switch from smoking to vaping, it’s important to replicate the sensation of actually smoking a cigarette.
What is the best nicotine strength?
Medium to high nicotine e liquid strength; 18mg is perfect for heavier smokers, ideally those of you used to smoking more than a pack a day. 18mg/ml nicotine strength is usually the highest you can buy within the EU due to the restrictions placed on the sale of nicotine.
How much nicotine is in a cigarette?
But to keep it simple, the average cigarette contains about 12mg of nicotine.
What happens if you pick a nicotine strength too high?
Pick a nicotine strength too high and you’ll be left feeling lightheaded, nauseous and just plain awful …
What is the most popular way to ingest nicotine?
It should come as no surprise to hear that the most popular method of ingesting nicotine is by smoking cigarettes.
What is nicotine in food?
Basically, nicotine is a chemical isolated from the nightshade family of plants, primarily (but not limited to!) the tobacco plant. For those of you wondering where you’ve heard of the nightshade plant family before, it’s what you’re tucking into when you eat a baked potato, red pepper or tomato (as well as several other foods!).
What is Vaping360?
The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to follow us on Facebook and Instagram for more!
What is the nicotine strength of Juul?
The popularity of nic salts e-liquid is the reason you see nicotine strengths jumping from 3 mg or 6 mg to 25 mg or even 60 mg in online shops these days.
How much nicotine is in 6 mg/ml of e-juice?
For 6 mg/mL e-juice, this means every milliliter contains 6 milligrams of nicotine. If you need to work out the total amount of nicotine in a bottle or in a tank, just multiply the strength in mg/mL by the number of milliliters of it you have.
How much nicotine is in e-liquid?
E-liquids come in strengths that start at zero nicotine and go up to over 50 mg/mL. You may have also seen nicotine strengths expressed as percentages instead of concentrations. All this can be confusing at first, but it doesn’t have to be! This guide will help steer you in the right direction when choosing nicotine strength, and show you how to navigate the market.
What is the percentage of nicotine in e-liquid?
This means that if you have some e-liquid containing 1.2% nicotine, any amount you measure out will be 1.2% nicotine and 98.8% PG, VG and flavorings. Technically, this measurement is called “nicotine by volume,” in the same way the percentages on a bottle of liquor are “alcohol by volume” or ABV for short.
What factors to consider when picking nicotine strength?
If you’re a new vaper, there are two major factors to consider when picking nicotine strength: your smoking habits, and the type of device you are planning on using. To help you navigate the market, we have categorized our suggestions by vapor output, as this is the factor that ultimately dictates the amount of nicotine consumed per puff.
Where is nicotine found in e juice?
Congratulations, you’ll never order the wrong e-juice again! Nicotine is an alkaloid found in plants from the nightshade family, including peppers, tomatoes and potatoes. But only in the tobacco plant it is abundant enough to extract and refine. Nicotine can be synthesized in a laboratory too, ...
What is vape juice?
Vape juice is the liquid used in electronic cigarettes that gets turned into vapor. It’s also referred to as:
How much does a 10 ml vape juice cost?
In general, a 10 mL bottle should cost you between $5 and $10. Everything under that is considered low priced and everything over it is relatively high priced. You can save some money if you go for larger quantities. A 30 mL bottle of vape juice will usually sell between $10 and $20, while a 60 mL bottle will set you back between $15 and $30.
How much nicotine is in 100% organic e-liquid?
If you wish to have a 100% organic e-liquid, then you will have to settle for 100% VG juice and, in most cases, 0 mg/mL nicotine content.
How many ml of e-liquid are there?
E-liquid usually comes in four bottle sizes: 10 mL, 30 mL, 60 mL and 120 mL. Other sizes exist but are not that common.
What is flavor concentrate?
Flavor concentrates are water-soluble and usually made by companies that manufacture food flavorings and/or fragrances. They range from tobaccos to fruits to chocolate glazed donuts—and everything in between. Many of the commercial e-juices will also contain sweeteners, with the most common of these being sucralose.
What is e-liquid made of?
E-liquid is made out of some essential and some optional ingredients. These ingredients can be categorized into base liquids (PG/VG), flavorings and sweeteners, and nicotine.
How long does e-liquid last?
Generally speaking, e-liquid lasts as long as its first ingredient to “expire.”. As a rule of thumb, that will be up to two years from its date of manufacture. E-liquid does not like heat, sunlight, and oxygen—how long it lasts will depend on how successful you are in avoiding them.
How is e liquid strength measured?
E-Liquid strength is almost always measured in milligrams (weight) per milliliter (volume); expressed as mg/mL. Often the “per mL” (/mL) is dropped in conversation or informal writing (and even on many labels). E-Liquid, or E-Juice, comes in many strengths depending largely on the manufacturer, sometimes even as high as 36 or 42mg/mL. NicVape produces E-Liquid in 0, 3, 6, 12, and 18mg/mL, for example. We believe this provides just the right gradations and range of strengths for our consumers. But, how do you choose what’s right for you? Understanding what the strengths mean to you can make the difference between a positive experience and a negative one with vaping, especially for first time vapers.
How much nicotine should I use for vaping?
Heavy smoker, or smoker of high nicotine cigarettes … You probably want to try 12mg/mL or 18mg/mL, especially if you are using a cartomizer or beginner type device, like an eGo or pen-style ecig. Our recommendation is to start lower and increase the strength if you don’t find it satisfying. Nicotine has a flavor all its own which will alter the true flavor of your e-Liquid. Also, it is easy to get more nicotine than you expected when vaping leading to that unsettling sensation, even if you have experience with smoking. (The “buzz” some users experience from nicotine is slightly different in nature than in cigarettes or e-cigarettes, and when vaping, there is no “end of the cigarette” to let you know when to stop. Many devices include “puff counters” or more rudimentary measurements, which may help you gauge your intake.) Additionally, the "buzz" may not even exist for users of ecigs, as ecigs don't contain some of the other chemicals contained in cigarettes that are reportedly associated with the "buzz." These additional chemicals* include nornicotine, anabasine and anatabine which, while found in cigarettes, are usually not present in e-cigarettes. (* Source: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC1508721/)
What is 6mg/ml?
6mg/mL … 6mg/mL strength is generally a good starting option for those who are current moderate/light smokers and are planning to use a “tank” device or an atomizer. If you are trying to switch from chewing tobacco or nicotine gum, this may also be the strength you need.
Do atomizers produce more vapor than cartomizers?
Also, atomizers and sub-Ohm devices tend to generate a lot more vapor (depending on how they are built and the air flow they provide) than cartomizers and 1st generation vaporizers. Using a high nicotine strength e-liquid with a sub-Ohm atomizer has much more impact than it does through a standard starter kit/cartomizer.
Does chewing tobacco cause nicotine to spike?
Chewing Tobacco/Snuff: Orally absorbed nicotine provides a slower “spike” of nicotine in your bloodstream, generally over a longer time than smoking. Some web research may help you understand what differences you are in for when choosing a new “delivery method” for nicotine.
Do cigarettes have nicotine?
Cigarettes also come in various sizes. So there is no specific standard amount of nicotine in “a cigarette”.
Do ecigs have buzz?
Many devices include “puff counters” or more rudimentary measurements, which may help you gauge your intake.) Additionally, the "buzz" may not even exist for users of ecigs, as ecigs don't contain some of the other chemicals contained in cigarettes that are reportedly associated with the "buzz.".
Why do people fail to vape?
In fact, a number of users fail to commit to vaping because they have been unknowingly using the incorrect strength of nicotine.
What are the strengths of nicotine in e-liquid?
Typically, the following strengths are found most commonly in e-liquids; 0mg (0% (nicotine free)), 3mg (0.3%), 6mg (0.6%), 8mg (0.8%), 10mg (1.0%), 12mg (1.2%), 16mg (1.6%), 18mg (1.8%), and 20mg (2.0%).
What is 3 mg nicotine?
3mg nicotine: 3mg is a low strength of nicotine and most commonly used by users who are cutting down their nicotine strength and on their way to nicotine free. In relation to cigarettes, 3mg would be used by social smokers or users who only smoke a few a cigarettes a day. 8mg nicotine:
What is the highest nicotine strength?
In relation to cigarettes, 16mg would be used by users who smoked 15+ cigarettes a day. 20mg nicotine: 20mg is the highest strength available by law. This will give you a really harsh sensation on the back of your throat. We would not recommend starting on this strength!
How to fight cravings with nicotine?
Start low, see how you feel, and if you do feel that you need more to help fight your cravings , then you can always go up a strength. Remember, your nicotine strength is not a commitment. It is only a bottle of e-liquid. If you’re unhappy with the strength you’re using, then simply change it for a lower/higher strength.
What is the best nicotine for vaping?
With that being said, many users who smoked more than that started vaping on this strength and found it to be the most ideal. 16mg nicotine: 16mg is a medium-high strength which will give you a strong sensation on the back of your throat.
What happens when you use nicotine?
What happens is they try their really strong nicotine, experience a really strong scratching sensation on the back of their throat. This can make some users cough and create an overall negative experience. If this is happening to you, then it would be a good idea to step down in your nicotine strength. Go down to a lower strength and you should ...
What is the nicotine content of vape e-liquid?
If you are vaping and have some e-liquid containing 1.2% nicotine, any amount you measure out will be 1.2% nicotine and 98.8% PG, VG, and flavorings.
How to convert nicotine strength to percentage?
Converting from a nicotine strength in mg/mL to a percentage is easy. Just divide the amount of nicotine in mg/mL by 10. To convert back from the percentage to mg/mL, just multiply it by 10.
How many mg of nicotine is in a milliliter?
Nicotine has a density of 1.01 grams per cubic centimeter, which means that 1,010 mg of pure nicotine takes up one milliliter. We can use this to convert mg of nicotine to mL of nicotine. Let’s say we have a 10ml bottle of e-liquid, and we need to find nicotine level in mg.
How much nicotine is in a bottle?
Now that we have the two volumes, nicotine (0.079mL) and the volume of the full e-liquid bottle (10mL), we can calculate the percentage of nicotine in the bottle (0.079/10) x 100, which is 0.79%, which is a very accurate small number, so a manufacturer will round up to 0.8% listed as the nicotine content in the bottle.
What is throat hit in e-cigarettes?
Nicotine has a lot to do with how an e-cigarette performs. This is commonly referred to as the “throat hit.” When moving up or down the nicotine level scale, try only one level up or down compared to the nicotine strength you are currently on due to the throat hit.
Is nicotine percentage confusing?
Nicotine percentages can be confusing to a new vaper, in this article we help make sense of it all.
Does e-liquid have nicotine?
By default, e-juice does not come with any nicotine level. Nicotine is an ingredient that is added. If you don’t currently use nicotine, you should not vape e-liquid that contains any amount of nicotine.
