When you receive the No Coil Detected warning and it’s an issue related to the mod, it’s often an issue with the center pin in the 510 connector. Since the pin in the Aegis Legend is spring-loaded, the only way the mod can be the cause of the issue is if the pin got stuck in its lowest position somehow.
Why does my vape tank say no coil detected?
The no atomizer message appears when your vape mod is unable to read the resistance level of your coil. Your mod can display a “no atomizer found” message for a variety of reasons, including: ·The tank is not screwed inadequately. If you don’t fully screw in your tank, the 510 connectors on your mod and tank will not make contact.
Why is my vape not reading my atomizer?
Jun 22, 2020 · “Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or …
Why is my vape not making any clouds?
Oct 23, 2018 · 5. Poor Vape Production. If you're noticing fewer clouds than usual, it's likely due to a bad coil. Fewer vapors affect your satisfaction level and rhythm you have while vaping so you will be able to notice this right away. Change the coil and this issue will likely go away instantly. 6.
What does “no coil detected” mean?
Sep 09, 2020 · If you press the firing button on your e-cig and you see the message ‘no atomizer’ or ‘check atomizer’ it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between. If your vape mod can’t detect your atomizer head, then it ...
How do you fix a coil on a vape?
- Take your new coil and apply 3-4 drops of your e-liquid directly to the wick.
- Set aside and wait for roughly 10 minutes.
- Screw the coil on to your device.
- Fill your tank with your chosen e-liquid and screw it on to your vape.
Are there Vapes without coils?
Why is my coil not working?
Why does my Smok alien say no coil?
Do all vapes have a coil?
Can you vape with no nicotine?
How do I know when the coil in my vape is bad?
- Your Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ...
- Your E-Cigarette Is Gurgling. ...
- Your Vape Tastes 'Strange' ...
- Your Coil Is Used Up. ...
- E-Cigarette Leaks.
How do you fix a disposable vape that won't smoke?
Why is it hard to pull from my vape?
How do I reset my SMOK vape?
How do you unlock a SMOK vape?
How do I know if my SMOK vape is charging?
What is a Vape Coil?
The coil is arguably the most important component of any vaping device. The coil is connected directly to the battery of your device and when activated, heats the E-Liquid to produce vapour.
How Often Should You Change Your Vape Coil?
A brand new coil should last for up to two weeks. This is because the E-Liquid tends to leave a thin layer of residue on the coil when it’s been vaporised.
Signs You Should Change Your Vape Coil
While we’ve given you a recommended time frame of how often you should be changing your vape coil, this can vary from device to device for a variety of factors such as:
What to do if your pod vape isn't firing?
If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.
Why is my pod not firing?
Dirt or ejuice can prevent a proper connection between your pod and the device and this can cause the device to not fire or to throw a check atomizer/no atomizer error.
Why won't my mod work?
Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work. In this quick guide you’ll learn how to fix this common annoyance and you’ll be back to vaping in no time!
What causes a check atomizer short?
Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.
Why is my atomizer checking?
Sometimes a check atomizer error can be caused by your coil. If cleaning your contact points didn’t work then you can try reseating your coil. You’ll want to take apart your tank as if you were changing the coil. Unfortunately, this can be a little bit messy and isn’t always convenient to do if you have a considerable amount of ejuice left in your tank.
What happens if your coils touch the build deck?
If your coils are touching the build deck then this can lead to error messages on your vape. Be sure that your coils are installed properly and that only the legs are in contact with the build deck. Reposition your coil using a screwdriver or coiling rod if it’s touching another part of the build deck.
Can vaping happen without cause?
All vapers will experience this problem at some point in their journey, and it can happen suddenly and without any apparent cause. Thankfully, while a bit frustrating, this is an easy problem to fix.
How to know when to change vape coil?
1. Experiencing a "Burnt" Taste in Your Mouth.
How long do vape coils last?
If you vape a lot, your vape coils may only last about 5-7 days. If you vape occasionally, it may last you a few weeks. And finally, if you're a really light vaper you could probably only change out your coils once a month or less.
Why does vaping taste burnt?
When you're vaping with a coil that needs replacing, you'll experience a burnt taste no matter what e-juice you use or what modifications you try to change. Once you sense this unpleasant taste, you need to make sure to replace your coil really quickly to avoid damaging other parts of your vaping device.
What is the difference between a lower resistance coil and a higher resistance coil?
Resistance allows you to customize your vape to your exact preference. Lower resistance coils give you a higher current and a hotter coil, which translates to warmer and more voluptuous vapors. Higher resistance coils give you a cooler vape experience.
How to tell if a coil is bad?
As we mentioned above, the most common indicator that your coil has gone bad is when you experience a burnt taste. However, in some cases, you may also experience a time when your e-juice simply tastes...off. You go to take a hit of your favorite cookie dessert flavored e-liquid and BAM! Your taste buds tell you something isn't quite right. You can't quite put your finger on it but you know something's up. (In that moment - remember this article!) Investigate your coil and swap in a new one. Voila, problem solved.
Do vape coils last forever?
Regardless of if you're a first-time vaper or more advanced, the time will come when you need to replace your vape coil. Unfortunately, they don't last forever and they need replacing quite frequently. The coil is ultimately responsible for heating the e-liquid and turning them into vapors for your pleasure.
Can you put off a vape coil?
Don't ignore these signs that your coil needs to be replaced. Putting it off can damage your vaping device and leave you with an unpleasant experience in many ways. The damaged coil will burn your precious e-liquids and ruin them! Don't be a victim to a bad coil, replace yours today.
How to tell if a vape tank is fine?
Pop a different vape tank on the mod and see if it is showing the same message. If it is then we know that your tank is fine and we need to take a closer look at your e-cig.
Why is my vape mod showing the same message?
If you have done the first test and another tank on your vape mod is showing the same message, this would indicate that the problem is your e-cig battery or mod. The chances are this is an easy fix.
How to get vape juice out of a tank?
Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.
Why is my 510 e-cig not working?
It can be because of the 510 connection, the vape coil itself or the bits in between. If your vape mod can’t detect your atomizer head, then it cannot properly deliver power to it. So your e-cig will throw up that message to let you know that there is a problem.
What does it mean when an e-cigarette says no atomizer?
An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.
How to remove a tank from an e-cigarette?
Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there. Then take a cotton bud, or piece of paper towel and press it gently into the hole on the top of your e-cig.
What does it mean when your tank is sat flush with a rubber o-ring?
If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.
How to tell if a vape is malfunctioning?
One easy way to know if your atomizer is malfunctioning is if your vape displays one of the following messages: check atomizer, no atomizer, or no atomizer found. If your vape shows one of these no atomizer messages, continue reading to find out how to proceed.
Why is my vape not recognizing my atomizer?
If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark. Take a close look at all the connection points on your device, clean them off, and make any adjustments to complete the current.
What causes a vape atomizer to fail?
The center pins can easily cause apparent atomizer failure, particularly when they’re misplaced. The pin is the connection tip that’s found inside the 510 connector, responsible for making contact between your atomizer and vape device. If your pin is too low or too high, it can’t properly connect, and your device simply won’t work.
What is the pin on a vape?
The pin is the connection tip that’s found inside the 510 connector, responsible for making contact between your atomizer and vape device. If your pin is too low or too high, it can’t properly connect, and your device simply won’t work.
What is a vaporizer?
A vaporizer is an electronic device, containing a battery that creates a very real electrical current. Above all, your safety should be your top priority. It’s easy enough to get a new atomizer or vape if yours has turned into a dud, but recovering from an injury that resulted from an overconfident, uninformed repair attempt is a much larger order.
How to prevent vaping issues?
Take a Proactive Approach. Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape. Cleaning your vape isn’t difficult, and takes just a few moments of your day.
What tool to use to adjust vape pins?
However, if your vape isn’t one of these models, use a small tool, like a precision flathead screwdriver, to adjust the pin position ever-so-slightly.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What does it mean when a vape exhales?
This does mean that they will use much more e-liquid and their battery will drain quicker.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
What is the outer casing of an atomizer?
It is the outer casing which attaches directly to the base of the tank and provides electrical contact to the coil.
Do you need to worry about Ohm's law?
If you vape a regulated e-cig, for example an arc 5 or Optimus, you do not need to worry about Ohm’s law as the device sorts this for you. If you use an unregulated e-cig, such as a mechanical mod then you need to be aware of Ohm’s law and battery safety.