If so, it is most certainly a problem with the mod, not the batteries. Something with the battery contacts, contact wiring, wiring to boards, wiring between boards...something would be moving and affecting the connections. This one will will require mod repair/replacement.
Full Answer
What does it mean when your vape is blinking?
Low or Dying Battery The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What are the most common vape battery problems vapers experience?
The following are some of the most common vape battery problems vapers can experience; It is one of the most common vaping problems that you can have with your vape pen and can be caused by a variety of issues including a failing charging system or a damaged vape pen.
Why is my vape battery not heating up?
If the vape battery is not heating the coil, it will be difficult to produce vapor and therefore enjoy the vaping process. This can be caused by a battery that is not sufficiently charged or a damaged battery. 3.Vape Battery Not Lasting Long
How do I know if my vape battery is full?
To see if this is the case, charge your vape until the light stays on (or stays green), indicating a full battery. 2. Fire Button Locked Some devices on the market allow you to lock the fire button to prevent your vape from accidentally firing while it’s in your pocket or bag.
What does battery imbalance mean on a vape?
Q: Why the device always show "imbalanced" ? A: For the imbalanced message, it means the voltage among your 3 batteries are not imbalance. The difference is higher than 0.3V. Please check your batteries again. We suggest you to change another 3 high-rate batteries with same parameter.
How do I fix my Glo cart?
0:101:25How to fix your cannabis vape pen and cartridge connection issueYouTubeStart of suggested clipEnd of suggested clipAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gentlyMoreAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gently catch underneath the edge of the connector. And tug.
Why is my new Glo cart not hitting?
Condensation Buildup. The most common cause of a clogged cart is condensation buildup inside the cart's airway. Over time, this condensation can block the mouthpiece, preventing vapor from passing through as you take a hit.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
What do I do if my cart wont hit?
The holes in the cartridge may be clogged with oil. Try warming your cartridge with a hair dryer (lowest heat setting) or by rubbing it between your hands to warm up the oil and change its viscosity. You can also poke a toothpick or safety pin gently in the hole to help de-clog it.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
Why does my battery blink 3 times?
Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
What does shorted mean on a vape?
electrical short circuitA 'Shorted' or 'Check Atomiser' error message means somewhere in the device's connection, the atomiser is causing an electrical short circuit. To resolve the issue, you will need to replace the coil in the tank.
What's atomizer short mean?
If your vape mod displays the error message “Atomizer Short,” it means that the device detects the atomizer coil, but the circuit is short or incomplete. A short circuit can cause an unsafe load on a battery, so your vape mod should detect the short circuit and display an error message when you try to vape.
What is a 510 pin on vape?
A descriptor of the threaded connection used to join parts, “510” literally refers to 10 threads at 5mm. This type of threaded connection quickly became the standard for most e-cigs and vape pens, making it easier to use various cartridges and pens together.
What does it mean when your mod is too hot?
Temperature alert: if the internal temperature of the device is over the supported temperature, the output will shut off automatically and the screen will display "Device Too Hot". This means you have used the mod for too long, and you should shut it down and wait for some time and then power on again.
What does "no atomizer" mean?
1. "No Atomizer" or "Check Atomizer". No atomizer / check atomizer alert: when the device does not detect an atomizer, the OLED screen will display "No Atomizer" or "Check Atomizer". ◆ Check the 510 electrode of your tank. Most of the devices have self-adjusting 510 connectors, but some have manually adjustable ones.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
ebin678 Full Member
I just got the snow wolf 218w and I charged my batteries externally last night...this morning I pop in my batteries and it says "the battery is imbalance". Anyone have/had this problem?
Gramdogg Ultra Member ECF Veteran
See if the batteries are manufactured on the same date if you can. Ex. My Samsung's both say 2G12, look up that number and both are made Jan. 2016. If the numbers don't match one will be older then the other and batteries age regardless of if you are using them or not so one may be 4.2v while other is only 4.15v.
Why is there an LED light behind my vape?
You may want to know that the LED light behind your vape’s fire button is used by most manufacturers to give you any warnings or signals that could interfere with your vaping experience , especially if the device doesn’t have a digital display.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What to do if your vape connectors are skew?
If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection. With clean hands and on a clean surface, try taking apart the various parts of your vape and wiping them with a dry cloth or tissue. Then, reassemble it and try to have a hit. 5.
How to stop vape from firing?
To test if this may be the issue with your vape, press the fire button three times in quick succession, then give it another go.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
Why is my coil shorting?
If you’re building your own coils, or even if you’re buying stock coils, there’s a chance that they are causing a short in your device. If the resistance is too low or the coil has been damaged, it will immediately send an error message to your device which then flashes the warning to you.