When there is not enough power coming from the vape pen battery, your vape will give a blinking light (a red light usually) to let you know you need to charge it. To see if this is the case, leave your battery charging until the light stays on (or the lights turn green), indicating a full battery.
Full Answer
What does a red light on a vape pen mean?
When you’ve depleted your vape pen’s battery to a certain level, a red light will appear on the LED display. Remember: red means “stop.” Hold off on using your vape pen again until it’s been charged. Attempting to use your vape pen in a low-battery state could lead to shorts, battery death, or other defects.
Why is my vape pen blinking?
The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged. To see if this is the case, charge your vape until ...
How do I know if my vape pen battery is depleted?
Watch for the red light that tells you it's time to recharge your battery. When you’ve depleted your vape pen’s battery to a certain level, a red light will appear on the LED display. Remember: red means “stop.” Hold off on using your vape pen again until it’s been charged.
How do I know if my vape is charging?
When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged. To see if this is the case, charge your vape until the light stays on (or stays green), indicating a full battery. 2. Fire Button Locked
What do the colors on my vape pen mean?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
How do I reset my ooze pen?
If you have an Ooze battery, press the button five times fast within two seconds, without pausing between clicks. If your battery is on, pressing the button will illuminate a light around the button and power the atomizer.
How do I get my vape to work again?
Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
How do I know if my ooze pen is broken?
Start by plugging it into the charger. If the pen lights up green and the charger lights up red, your pen is dead!
What does it mean when the ooze charger is red?
Needs ChargeThese colors indicate the charge: Green = Full Charge. White = 50% Red = Needs Charge.
Why won't my vape pen heat up?
If your pen's atomizer isn't heating, first to make sure that your battery is charged and turned on. Then check the connection between the battery and your atomizer or cartridge. If it is dirty, clean it with a cotton swab. You will also want to make sure this connection isn't overtightened.
How do you fix a vape that won't smoke?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
Why is my vape on but not working?
If you're using your vape pen's battery correctly but it's not working, inspect the battery's contact point for damage or residue, like excess oil. If it seems clogged, clean it with rubbing alcohol and let it dry before reconnecting it to the cart.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What does a signal mean on a vape?
Signals like these are in place to let you know of any shorts, battery faults, or damage that your device may have. Take a look at your manual or ask the staff at your local vape shop to see what safety features your device has and what the warnings could mean.
What happens if your 510 pin is stuck?
If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
Why do you have to lock the fire button on a vape?
Some devices on the market allow you to lock the fire button to prevent your vape from accidentally firing while it’s in your pocket or bag.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why is my vape not connecting?
In some cases, the only issue is that your vape needs a quick clean and re-assembling. If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection.
What does it mean when your vape pen blinks red?
When you pressing power button 3 times continuously, the indicator light blinking red it indicates that the vape pen switches to low mode power output.
Why won't my vape pen hit?
If you find your vape pen won't hit, the reasons and suggestions are as follows: Low battery, charge your vape pen. Remember to press the power button (if your vape pen has) when you are vaping. Loose battery, if your vape pen battery is not built-in, unscrew the battery and re-screw it back in.
How long does it take for a vape pen to shut off?
Vaping over 8 seconds at one time, the vape pen will automatically shut off.
Why is my Ooze pen blinking green?
If a dead battery is not your problem and your pen is still blinking, perhaps you have a connection issue, which brings us to the second most common reason your Ooze pen is blinking green. 2. There is a connection issue. When the battery is having a connection issue, the battery will typically blink green 4-5 times.
Why is my pen blinking?
If a dead battery is not your problem and your pen is still blinking, you might be experiencing another common problem: a connection issue.
How many clicks does an Ooze pen have?
If you use Ooze pens you’ll know that it’s 5 clicks on, 5 clicks off, 2 clicks to preheat -- all illuminating the pen green with each click. However, what do you do when your ooze pen is blinking green when you aren’t ...
What color is the Ooze charger?
Authentic Ooze Smart USB Chargers should light up red when your vape battery is charging, and the battery light should light up green.
How to check if a vape pen is working?
To avoid this, just ensure that the heating coil is pulled out to the point where it’s flush with the bottom of the cartridge, which you can do by using the tip of a pocket knife, a razor blade, or paper clip. Thereafter connect it to a charged battery to check if it’s “pulling” properly. Check out this video showing how to pull out the firing pin with the aid of a paper clip. Using this simple method your vape pen should be working A-Okay. A word of caution- please be careful not to cut yourself while doing this.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
How to stop a vape pen from scratching?
The first problem is pretty straight forward, and the solution is to always make sure your vape pen has enough juice in it to avoid that scratchy feeling in your throat. Alternatively, you can check the way you’re drawing and reduce the number of puffs you take in succession. Sipping on some water can also relieve these symptoms.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
What does it mean when your vape pen is red?
When you’ve depleted your vape pen’s battery to a certain level, a red light will appear on the LED display. Remember: red means “stop.”. Hold off on using your vape pen again until it’s been charged. Attempting to use your vape pen in a low-battery state could lead to shorts, battery death, or other defects.
How to tell if a vape pen has a battery?
You can usually find this information in the users manual or instruction booklet that came with your vape pen. Integrated batteries typically take the form of an elongated tube or cylinder (which attaches to the cartridge, or the part that heats the e-liquid), whereas removable batteries are housed inside casing of the pen itself.
How to charge a vape pen?
If your vape pen runs on removable batteries, you’ll need to take them out before you can charge them. Look for the removable battery cover on the bottom or side of your pen. Once you find it, press the thumb latch or tab to pull it open.
How to hook up a vape pen to a charger?
First, plug the AC adapter into a nearby electrical outlet. Then, insert the large end of the USB cable into the adapter and connect the smaller end to the corresponding port in your pen.
What happens if you use a vape pen in a low battery state?
Attempting to use your vape pen in a low-battery state could lead to shorts, battery death, or other defects.
Why is my vape pen burning out?
If your vape pen has a "soft start" mode and you’re not in a hurry, consider using it. Soft start charges batteries at a slow rate rather than quickly at high heat , which can cause them to burn out faster.
What type of battery is used to power a vape pen?
This usually involves fitting the cartridge into a separate device that houses the batteries. The most common type of removable battery used to power vape pens are 18650s. These look similar to standard AA batteries, only bigger. Tip: Not all 18650 batteries are designed to be used in vape devices.
How to clear a vape mouthpiece?
This can be cleared simply by removing the mouthpiece and blowing through it to remove the dust and dirt.
Why do some tanks have o rings?
Some devices use o-rings in the tank to prevent leakage. If you have a leaking tank, it’s worth checking to see if the o-ring has moved or is broken. Some tanks come with replacement o-rings just in case this happens.
What is the balance between throat hit and vapour?
The exact throat hit/vapour production depends on the ratio of vegetable glycerine (VG) to propylene glycol (PG).
What does it mean when you don't get enough nicotine?
Contents. 1. Not getting enough of a nicotine hit. i. Using too low a nicotine strength. Many e-cigarettes deliver nicotine more slowly than cigarettes. Because of this, you may need a higher level of nicotine in your e-liquid to get the same effect as a cigarette, so try switching to a higher strength e-liquid.
How to get flavour out of a tank?
Try gently blowing back through the tank (don’t blow too hard or you will get e-liquid into the centre tube, leading to flooding issues). This works surprisingly well at releasing flavour.
How long should you let e-liquid soak in?
Have you let your e-liquid soak in? Most tanks should be left for five minutes or so to allow the e-liquid to soak into the coil, wick and atomiser. If you haven’t done this, you will probably get a horrible burnt taste!
Why does my electronic cigarette make a gurgling noise?
If you get a gurgling noise when you are using your electronic cigarette, you probably have a flooded tank. Possible causes include:
Why won't my vape light go off?
Is this the charger you purchased with your device? If not, that may be why the light won't go off. If so, you may just have a bad charger. Since they're cheaper, I'd try replacing the charger before your battery. If it turns out your battery *IS* bad, now you have an extra charger. Also, if you're in the market for another battery, you might want to pick up an extra one (assuming your vape budget allows you to do so)
How much current does an EGO T take?
eGo-T's take a different charger than regular eGos too...a higher voltage of 4.2V and about half an Amp of current.
Does "sold it with the device" mean it is correct?
Just because a vendor sold it with the device, does NOT mean it is correct.