A vape coil is an arrangement of small parts designed to absorb and atomise e-liquid. You start with a small heating element, usually a curl of kanthal wire. This element is packed in dense cotton, which is then all housed inside a steel casing with wicking ports lining the exterior.
Full Answer
What coil should I use for my vape?
Jan 20, 2020 · What are vape coils? Although widely known as coils, they are technically atomizer heads. The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience. Housed within the vape …
How to put a coil in a vape?
Feb 15, 2022 · IT is a small, round shaped device that clips into the inside of your tank. The coil burns up the e-liquid so that it vaporises into steam and provides you with the flavour you crave. Coils are a delicate piece of vaping technology and, if something is going to go wrong with your vape device, it is usually the coil.
How much does a coil cost for a vape?
WHAT IS A VAPE COIL? The vape coil is a lot like the heart of your mod or e-cigarette kit, it’s the unit responsible for heating up the e-liquid and vapourising it. The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire. You’d then measure this resistance with the help of an Ohmmeter.
What are the best vaping coils?
Oct 29, 2020 · The conductor is the vape coil made of stainless steel, found within your atomiser casing. A low resistance coil used for Sub-Ohm vaping will use more power, potentially impacting the battery life of your device. Because you're using more energy, you'll consequently heat your e-liquid to a hotter temperature.
How do I know what coil to use in my vape?
Vape coils generally have an ohm range of 2.4-2.8 ohms, with lots of people enjoying a resistance of 2.5ohms. Low ohm vape coils produce more vapour and flavour and case use more e-liquid and take more battery power than high ohms. High ohm e-cig coils produce less vapour and use less e-liquid and battery.3 Apr 2017
Does a vape come with a coil?
Vape kits come with your first coil (sometimes two) to get you started - so check on the box the one you need and make sure you order the same again to get the best vaping experience.
How often should I change coil in vape?
Vape coils aren't designed to last forever – they endure repeated reheating and cooling which means they eventually burn out. Vape coils need replacing regularly, approximately every 1-4 weeks.15 Sept 2020
What are the different coils for vaping?
What Are Vaping Coils Made From?Kanthal. This is the most common wire type, but is actually a trade name. ... Nichrome. This is very similar to Kanthal, but is composed of two metals rather than three. ... Stainless Steel. Yes, stainless steel is used as a vape coil wire. ... Titanium. ... Nickel. ... Vertical coil. ... Dual coil. ... Triple coil.More items...
How do you know when the coil needs changing on a vape?
5 Signs That Your Coil Needs ReplacingBurnt Taste. The first and most prominent way to tell your coil needs changing is by experiencing an unpleasant burning taste in your vape.Bubbling Noise. In this case, your device is literally telling you to change the coil. ... Weak Flavour. ... Little Vapour. ... Leaking Device.
Why is my coil glowing red?
Hot spots on the coils Another common cause of burnt hits when vaping are hotspots on the coil which can cause it to glow an intense red as the excessive heat moves through it. Vaping on a hot-spotted coil can result in a nasty metallic tasting draw that will be hot and unpleasant.
Why does my coil taste burnt after 1 day?
Why your vape tastes burnt It tastes burnt because the wick inside your atomizer coil has dried out and burned up when it was heated. The wick is the part of your vaporizer that soaks up the eliquid from the tank. The wick holds onto this eliquid before it is turned into vapor when the coil heats up.13 Feb 2022
What happens if you vape with a burnt coil?
The clogged coils will build up gunk that eventually burns the coil and renders it useless. The same is true for e-juice that is too thin and watery. For fruit and other sweet e-liquids, if the consistency is too liquidy, the cotton can't soak up the e-juice fast enough.27 Oct 2020
Why does my vape crackle?
When inhaling on your device, vape juice is drawn into the coil. It is then the coils job to heat up the e-liquid and turn it into vapour. Like with most liquid when it is heated rapidly it will make a crackling noise as it turns into vapour.20 Jul 2021
What is the difference between a 0.6 and 1.2 coil?
The PockeX adopts U-Tech coil technology. The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
Do all the vape coil work same?
Known by many different names, they all do the same job and are essential to your vaping experience.
How long will a coil last?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.22 Jan 2021
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
Do sub ohm coils produce more vapour?
While preferred nicotine strength is often a personal choice, it’s important to remember that sub ohm coils will heat more e-liquid to produce more vapour. What this means is that you’ll also experience a greater nicotine hit.
What is an atomizer?
Atomizers are relatively simple in construction - typically consisting of just a coil that is wrapped in wicking material (which absorbs e-liquid). When a device is activated for use, vape coils draw power from the battery to produce heat and vaporize e-liquid or nicotine salts. Vape coils are measured in ohms.
What is a vape coil?
Vape coils are used to heat your vape juice and create vapor. Atomizers are relatively simple in construction - typically consisting of just a coil that is wrapped in wicking material (which absorbs e-liquid). When a device is activated for use, vape coils draw power from the battery to produce heat and vaporize e-liquid or nicotine salts.
Why won't my vape coil fire?
Likely, it may not be screwed in evenly. Empty your tank and unscrew your vapor coil. Screw it back in, ensuring that it is screwed in evenly.
How to choose a vape coil?
Unfortunately, vape coils are not universal and every coil won’t work properly with every device. Here are a few tips to ensure you choose the right vape coils for your device: 1 Choose The Same Vape Brand - Manufacturers usually produce a line of vape coils that are compatible with their specific devices. When purchasing new vape replacement coils, look for options from the same brand as the device that you are using. 2 Consider The Resistance - Most lines of vape coils come in several resistance level choices to help you achieve the best experience. Coil manufacturers typically list which wattage range is ideal for the particular resistance levels of their vape coils. Before purchasing new coils, consider which wattage you typically vape at and purchase a coil that is ideal for that wattage range. 3 Check Recommendations - At Vaping.com, we make it easy to pick the best vape coils. Not only do we explicitly state which devices our coils are compatible with, we also list the best wattage range; eliminating the need to guess and allowing you to make the best choice!
Why does vape juice taste burnt?
Vape Juice Tastes Burnt After New Vape Coil Is Installed: This likely means that you have burned out the coil by taking a dry pull from your vape device. The coil will likely still work, but this will affect the taste of your vape juice until it is replaced.
Is vape coil universal?
Unfortunately, vape coils are not universal and every coil won’t work properly with every device. Here are a few tips to ensure you choose the right vape coils for your device: Choose The Same Vape Brand - Manufacturers usually produce a line of vape coils that are compatible with their specific devices.
Can you build your own vapor coils?
Some people choose to build their own vapor coils, but if you prefer not to, vaping.com provides a wide selection of high-quality pre-made coils. For those who want to create their own coil builds, rebuildable atomizers give vapers the flexibility to build their coils however they choose.
New to vaping? We have all the information you need to ensure you get nothing but the smoothest experience
One statutory piece of equipment that all vape devices have in common is the coil. The coil is the element which is heated, and sits within your tank, aromiser or clearomiser. The coil isn’t designed to last forever. Rather like the filament in a kettle, it will eventually burn away.
What is a Coil and What does it do?
Let’s start with the basics: what is your coil, what does it do, where is it located and what does it look like?
How do you flood your coil?
Flooded coils are a common problem usually caused by overfilling your tank. Make sure you follow the instructions on your vape device for filling and stay within the marks for minimum and maximum amounts. You can also flood your coil by having the temperature and wattage turned down too low.
Do you have to Prime your Coils?
Not all devices require you to prime your coils but some will. The act of priming a coil refers to exposing it to enough e-liquid that it reaches the saturation point needed to burn without burning dry. Priming coils is a task only performed on new coils or on new devices. There are two ways to prime your coils.
Do all coils fit on every vaping device?
No, they don’t. You must be very careful with your vaping device. When you buy your kit, it will come with everything you need to begin vaping. When parts of it start to wear out, you can replace them through the Vape Direct online shop. Simply search for the coil you need mentioning the make and model of your vaping device.
My coil tastes burnt – why?
We covered this frequently asked coil question in another article. If your coil tastes burnt, it could be because there is too much liquid in your tank. Another reason could be that you need to replace the coil, or that the temperature is too high on your device.
Where to Buy New Coils for My Vape Device
Last but by no means least, you can shop for a new vaping device coil right here on the Vape Direct website. Don’t forget to buy a spare just in case your existing one burns out one day. No body wants to be left high and dry when it comes to nicotine.
What is a vape coil?
The vape coil is a lot like the heart of your mod or e-cigarette kit, it’s the unit responsible for heating up the e-liquid and vapourising it. The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire. You’d then measure this resistance with the help of an Ohmmeter.
Why is my vape coil burning?
The reason for this is that the tank is running too hot for the coil to manage it. Sometimes chain vaping can also affect the lifespan of your coil as it can get too hot and start to burn the coil. If you inspect your coil and wicking material more closely, you’ll see that the cotton is often discoloured and burnt.
What is the difference between a low resistance coil and a high resistance coil?
Low resistance coils produce warmer vapour and larger clouds, whereas high resistance coils produce a cooler vape with less current. Despite being so integral, the coil is a fairly simple mechanism. It’s constructed from a coiled wire or a piece of mesh and some wicking material (usually cotton).
What is Kanthal coil?
KANTHAL COIL. Kanthal is a combination of iron, chromium and aluminium and is a popular wire used in both pre-made and home made coils. It has a super quick ramp up time and as such, creates impressive amounts of vapour. Kanthal coils are only suitable to be used in wattage mode.
How to replace a coil in a tank?
However, there are a few general steps you can follow regardless of which variety you have when you’re replacing an old coil. Unscrew the battery from the tank. Turn the tank upside down and unscrew the metal bottom cap. Unscrew the coil head from the bottom cap and screw the new coil into it.
What is ceramic coil?
A ceramic coil material is porous, so air passes through it particularly well and offers a super smooth draw. Many reviewers find that the ceramic material brings out the flavour more than other materials. They tolerate high wattages well too so they’re a great addition to the more high-powered mods on the market. Ceramic coils have also been touted to last longer than cotton coils and help prevent dry hits.
How to make a wire glow?
Oxidise the wire: Cut a 4-5 inch piece of wire, hold one end with tweezers or pliers and heat the wire at the other end until it glows orange. Slowly move the flame down the length of the wire until it all glows orange. Then swap sides and repeat the same steps. This will make the wire much easier to work with.
What is Kanthal coil?
A hardy material with excellent resistance to high temperatures. Kanthal: Made from a combination of aluminium, iron and chromium, kanthal vape coils are particularly suited to high wattage vape mods. With a super quick heat up time, expect some serious vapour production.
What material is used to make vape coils?
Let's take a quick look at some of the materials used to make vape coils and how they might affect your vape: Ceramic: A porous material - ceramic coils are known to enhance the flavour of your vape compared to other materials used to produce vape coils.
How long should I wait to fill my vape coil?
Priming your vape coil is easy and straightforward. Simply fill your tank with e-liquid and allow the tank to stand for anywhere between 5 and 30 minutes - the longer the better! Your other option is to manually soak the wicking material through the openings in the atomiser head. A few drops should be enough.
How to get vape coils to taste fresh?
Cleaning your vape coil is easy and will quickly restore your vape coil to a state that enables your vape to taste fresh, clean and more enjoyable. Follow the simple steps found below to regain flavour: Remove your vape coil, including wicking material from the coil head and place into a small bowl of warm water.
How to change coil on vape?
However, these general rules will enable you to change your vape coil like a pro: Remove the e-liquid tank from the battery. Turn the tank upside down and unscrew the cap found on the bottom. Carefully unscrew the coil head from the cap and replace with your new coil.
What is a vape pod?
For instance; if you're talking about an e-cig, vape pen, or vape pod, all are vaporisers intended for use with e-liquids or cartridges. Similar to other vaping components, vape coils are just one of the names given. Also known as atomiser heads, or clearomisers; vape coils describe the element and mechanism that converts energy from your battery.
Why is a low resistance coil used for sub ohm vaping?
A low resistance coil used for Sub-Ohm vaping will use more power, potentially impacting the battery life of your device. Because you're using more energy, you'll consequently heat your e-liquid to a hotter temperature. This creates some fairly sizeable vapour clouds.
What are mesh coils?
Mesh coils have evolved into one of the most popular choices in vaping, for both beginners and experienced users alike. These coils are usually constructed from either Stainless Steel or Kanthal materials, and are widely available for most devices and RDAs nowadays. Providing a rich source of flavour due to the larger surface area heated, mesh coils replace the regular wire heating element used in standard coils and use metallic mesh instead. This results in faster firing, a longer lifespan and enhanced power efficiency altogether compared to conventional round wire coils.
What is a titanium coil wire?
Titanium coil wire or Ti wire, whilst rare is growing in popularity within the ever-burgeoning vape market. This type of wire can only be used in Temperature Control Mode, which is employed on a number of advanced sub ohm vape devices.
What is a vape coil?
Vape coils are specifically designed to be fitted into your vape tank or rebuildable atomiser. Coils mostly consist of a wrapped piece of metal wire and a cotton wick. The wick soaks up e-liquid, that the coil heats to the point it turns into vapour.
Why use Kanthal coil wire?
The reason behind this, is that it is cheap to source and easy to use, providing good flavour and cloud production. Kanthal Coil Wire is found in both tank coils and prebuilt coils for rebuildable atomisers.
What is a NI200 coil?
Nickel coil wire or NI200, is a firm favourite amongst experienced vapers and is used primarily in advanced vape devices and kits. Nickel coils can only be used in Temperature Control mode, but are reliable and perform well at high temperatures.
What is SS wire?
STAINLESS STEEL. Stainless Steel coil wire, often shortened to ‘SS’, is a versatile material for vape coils. It is the only kind of coil that can be used in both Variable Wattage Mode and Temperature Control Mode, making it a popular choice, particularly for advanced vapers. Stainless Steel heats up faster than standard Kanthal wire ...
Is NiChrome coil wire the same as Kanthal coil wire?
NiChrome coil wire, or Ni80 as it’s more commonly known, is similar to Kanthal in that it’s readily available and can only be used in Variable Wattage Mode. This makes it ideal for different vape kits and devices and can be found in both tank coils and prebuilt coils for rebuildable atomisers. NiChrome heats up faster than Kanthal, for a faster ramp up and large cloud production.
How much power does a sub ohm vape use?
Sub-ohm (Best for Cloud Chasers) - Recomended. Sub ohm vape pens are less than 1 ohm: hence the term "Sub-ohm". Sub-ohm vapes use a ton of power: typically 40 watts and up, sometimes exceeding 200W! On most units you can also crank down the voltage and get standard ohm hits. 0<1 less than one-ohm standard.
What is coil ohms?
What are Coil OHMS? The ohm (represented by the Ω symbol) is a measure of resistance that determines the amount of heat your coil generates. Coils resistances very from vape to vape. Vape devices will also have some internal resistance. This must be added to the coil ohm resistance to get your total resistance.
What are the different ohms for a coil pens?
The Most Common Coil Ohm Types. Vape pens can come in different Ohm classes: Standard-ohm, Low-ohm, and sub-ohm. Here we compare the drawbacks and benefits to each type.
Can you use sub ohm coils?
Improper coil matching can damage your power supply. "Sub-ohm vapes" are not considered Sub-ohm unless they carry high wattage/power as well, some low powered devices carry Sub-ohm coils but are considered standard - they barely produce smoke.
Does an adjustable vape pen increase wattage?
If you have an adjustable vape pen a higher voltage will increase your wattage, drain your e-liquid supply and reduce battery life. The benefit, however, is more smoke and more flavor (although some flavors do better at a lower power setting.)