- Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.
- Check Your Contact Points for Damage. If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates ...
- Reseat your Coil/Pod. Sometimes the most simple fixes are the most effective. ...
- Try Another Coil/Pod. If you’ve tried all of the above steps and nothing is working, the problem could be that your coil or pod has an issue.
- Clean Your Contact Points. The first step you should try if your pod vape isn't firing or says check atomizer is cleaning out your contact points. ...
- Check Your Contact Points for Damage. ...
- Reseat your Coil/Pod. ...
- Try Another Coil/Pod.
What does No atomizer mean on vape?
What does it mean when it says check atomizer? If you press the firing button on your e-cig and you see the message ‘no atomizer ‘ or ‘ check atomizer ‘ it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.
How to fix atomizer on vape?
- There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. ...
- You keep dropping your pen – one drop too much and you’re risking rattling the insides of your device. ...
- You’re over-tightening your atomizer – you should be gentle with your atomizer. ...
How to fix 'check atomizer'?
How to Fix Check Atomizer/No Atomizer On Your Vape Mod. How to Fix Check Atomizer/No Atomizer with a Vape Tank 1. Try Another Tank/Mod. This is the best way to know if there’s truly a problem. If you have another tank handy, you can try doing a switch. Take the tank off of your current mod and replace it with another tank.
How to clean your vape atomizer?
The cleaning agent rinse
- Baking soda is a good cleaning agent that can be used to get tanks sparkling again.
- Ethanol, aka grain alcohol, is yet another highly effective substance for cleaning. ...
- Cheap Vodka is not a household item, but chances are you can find it at the grocery store. ...
How do you fix a vape when it says check atomizer?
RecapClean all contacts on battery/mod, tank or pod.Remove and reinstall the coil (after cleaning)Try a new coil.Check the 510 pin and see if you can adjust it (mods/tanks)Try another tank on your mod.Try another mod with your tank.Adjust base of coil carefully if you can (mainly sub-Ohm coils)
How do I fix my atomizer in my tank?
3:256:58How to fix a no atomizer message on your vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipMod. If you've done the first test and another tank on your vape mod is showing the same. MessageMoreMod. If you've done the first test and another tank on your vape mod is showing the same. Message this would indicate that the problem is with your e-cig battery or your mod. The chances are this is
How do I reset my vape atomizer?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
What does it mean when it says atomizer?
Atomizer Short or Short Circuit When your vape mod tells you that it has a short circuit, it means that something is critically wrong with the electrical circuit connecting the battery in your vaping device to the atomizer coil.
How do I clean my vape atomizer?
To carry out this method, simply submerge your atomizer in some isopropyl alcohol for 30-60 minutes. This will cause the hardened dirt to become saturated and it will break down and pull away from the atomizer when you wipe it down with your cotton buds.
How long do Clearomizers last?
between one and four weeksA clearomizer/tank with a non-replaceable coil head can last from anywhere between one and four weeks (depending on frequency of use and type of e-liquid used). After this period, the coil within it will generally burn out and will need replacing.
Is an atomizer a coil?
The coil is a small part in an electronic cigarette which gets hot. A coil head is also known as an atomizer head. These are words for the same thing, the heating element inside an e-cigarette.
How do you fix a vape that won't smoke?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
What does no atomizer mean on a Smok vape?
When you get the “No atomizer” or “Check atomizer” message, it means your mod doesn't think your tank – or more specifically, your coil or atomizer head – is attached to the connection point. You'll see the same message when you try to fire a mod without anything attached.
How do I reset my Smok vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do I fix atomizer short on geek vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
How do I fix my vape coil?
How to Clean a Burnt CoilSTEP ONE: SOAK YOUR COILS. First thing's first, remove your coils from your e-cig and let them soak in a bowl of hot water to loosen any residue.STEP TWO: CLEANSE YOUR COILS (optional) ... STEP THREE: LEAVE TO AIR DRY. ... STEP FOUR: PRIME THE COILS. ... STEP FIVE: REPLACE.
1. Bad coil connection
If you are using a sub-ohm tank, then it is possible that your coil was inserted incorrectly, or it was just not tight enough. So simply re-insert it. Sometimes it’s just as simple as that!
2. You are creating a short
If you are using a rebuildable tank, make sure your build is not touching the cap or any other metal piece of the deck. Also make sure your coil is in good shape and there are no breaks.
3. You have a faulty tank or coil
Sometimes there is nothing wrong with your mod and the issue well might be in your tank. So try to screw a different atomizer in. If your mod is now able to fire the new atomizer, then you know who to blame! For sub-ohm tanks with pre-made coils, sometimes, you just get a bad coil. Try using a different one from the pack.
4. There is no connection
Clean the 510 thread of your mod and the 510 pin of your mod. Maybe there is just something stuck in between. If this does not work, maybe the lack of connection is related to your coil.
What does it mean when an e-cigarette says no atomizer?
An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.
How to get vape juice out of a tank?
Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.
What does it mean when your tank is sat flush with a rubber o-ring?
If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.
How to get a tank to pop back into the correct position?
Take your tank off your mod and turn it off, or remove the battery. Then take something small, like a small screwdriver and very gently press down on the pin. You should feel the spring underneath and this can get it to pop back into the correct position. Try attaching your tank again and see if the message has gone.
Can a mod make a complete connection to a vape tank?
Over time the connection on your e-cig can gather dust, dirt and e-liquid. If this is the case and your mod can’t make a complete connection to your vape tank, then this message will display. Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there.
The Ultimate Guide On Vape Wire and Vape Coil
A vape is a relatively complex device. You're well aware of what it does, but are you aware of how it works? Vapes turn vape liquid into...
How to Vape Properly in 7 Easy Steps
The concept of vaping is pretty straightforward, but it does require some preparation. Even if you get a disposable e-cigarette that comes...
Best E-juice to Extend Vape Coil Life
We change our replacement coils frequently due to the coil gunk, which is annoying. In addition, the cost of coil replacement isn’t...
How to Clean Any Pod Vaping System
If you’re fortunate enough to own one of the latest pod vaping systems from Premium Vape or another fine vape shop, you’ve experienced...
How to Vape Properly to Max Out the Vaping Experience?
As the whole vape culture continues to expand and take over the tobacco world, many people are turning to e-cigarettes. Younger people...
The Ultimate Guide On Vape Wire and Vape Coil
A vape is a relatively complex device. You're well aware of what it does, but are you aware of how it works? Vapes turn vape liquid into...
How to Vape Properly in 7 Easy Steps
The concept of vaping is pretty straightforward, but it does require some preparation. Even if you get a disposable e-cigarette that comes...
Why is my vape not recognizing my atomizer?
If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark. Take a close look at all the connection points on your device, clean them off, and make any adjustments to complete the current.
How long does it take to read a vaporizer?
Reading Time: 4 minutes . Your vaporizer is a lot like your car: you count on it on a daily basis, it’s a critical part of your everyday routine, and you hope to avoid issues at all costs. However, just like a vehicle, vaporizers do run into mechanical problems every now and then.
How to tell if a vape is malfunctioning?
One easy way to know if your atomizer is malfunctioning is if your vape displays one of the following messages: check atomizer, no atomizer, or no atomizer found. If your vape shows one of these no atomizer messages, continue reading to find out how to proceed.
What is a vaporizer?
A vaporizer is an electronic device, containing a battery that creates a very real electrical current. Above all, your safety should be your top priority. It’s easy enough to get a new atomizer or vape if yours has turned into a dud, but recovering from an injury that resulted from an overconfident, uninformed repair attempt is a much larger order.
How to prevent vaping issues?
Take a Proactive Approach. Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape. Cleaning your vape isn’t difficult, and takes just a few moments of your day.
What tool to use to adjust vape pins?
However, if your vape isn’t one of these models, use a small tool, like a precision flathead screwdriver, to adjust the pin position ever-so-slightly.
What is the pin on a vape?
The pin is the connection tip that’s found inside the 510 connector, responsible for making contact between your atomizer and vape device. If your pin is too low or too high, it can’t properly connect, and your device simply won’t work.
How to clean a tank when it is apart?
When your tank is apart, unscrew the coil from the base of the tank and clean the bottom of the coil where it screws into the tank and makes contact. You’ll also need to do the same to the tank, ie clean the area inside the tank where the coil sits. When clean and dry reinstall the coil and reassemble your tank.
Can you use a sub ohm battery on a mod?
Standard batteries probably won't fire below 1.0 Ohm and putting a tank with a sub-Ohm coil on a standard battery is a no no. If the new tank works fine on your mod you know the issue is with your existing tank or the coil. If your mod is still reading 'check atomizer' or 'no atomizer' with the new tank, it’s likely to be a problem with the mod.
Why do vapers forget atomizer error messages?
They were added by the manufacturer to protect you from faulty atomizers, and to prevent firing mishaps that can cause damage or injury.
Why does my mod say no atomizer?
However, once you put your top cap on, the sides are touching the coil (usually because it’s either too large or protrudes to one side too much), and that causes your mod to show you a “no atomizer” or “short atomizer” error message.
What does it mean when your chipset says no atomizer?
When your chipset is responsible for an “atomizer short “or a “no atomizer” error message, it means that it’s preventing firing on the basest of levels. There’s nothing here that you can fiddle with or adjust to fix this.
Why does my vape pen leak?
There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. When juice seeps into your circuitry, it can damage it and cause it to show error messages when there’s actually nothing wrong with the atomizer.
What does it mean when a vape mod says check atomizer?
The message “Check Atomizer” means that your vape mod isn’t detecting the connected atomizer coil at all. That may mean that the tank isn’t assembled correctly, that the tank doesn’t have a firm connection with the mod or that the coil itself has a problem. Use these steps to troubleshoot a “Check Atomizer” error.
What does it mean when a vape mod says "Time Out"?
The message “Time Out” means that the length of your puff has exceeded what your vape mod’s puff timer will allow. Most vaping devices have built-in puff timers that help to prevent overheating. Suppose, for instance, that you’re carrying your vape mod in your pocket, and you’ve forgotten to lock it. You inadvertently push and hold the mod’s fire button when you sit down. Without a puff timer, that’s a potentially dangerous situation. With a puff timer, though, the device automatically cuts off, so its temperature stays in a safe range.
What does it mean when a vape mod says it has a short circuit?
When your vape mod tells you that it has a short circuit, it means that something is critically wrong with the electrical circuit connecting the battery in your vaping device to the atomizer coil. You might get the “Atomizer Short” message, for instance, if unexpected metal-on-metal contact occurs inside your tank. For example, maybe the coil in your tank is cross-threaded, so the coil is seated a little higher in the tank’s base than it should be, and that’s causing the tank’s chimney to touch the heating wire inside the coil. A manufacturing defect in the coil can also cause a short circuit.
What does it mean when you see an error message on a mod?
If you see any of the above error messages on your mod, it means that the resistance of the connected atomizer coil isn’t within your device’s supported range. There are two likely reasons why you might see that error message.