What coil is best for high VG?
As it is a thicker substance, high VG vape juice should be used with low resistance coils with large wicking areas. This will allow the e-liquid to be absorbed properly and create the best vape.
What ohm is best for VG?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
What VG PG is best for coils?
What Is The Best E-Liquid For Different Ohm Coils?Coil Resistance (in ohms Ω)Best All-Round PG/VG RatioExtra Information0.1 to 0.4 ohm80% VG50/50 e-liquid will work with these coils, but thicker, higher VG liquids will produce bigger, thicker clouds3 more rows
Is 0.6 or 0.4 coil better?
I found the 0.6-ohm best around 12 watts and the 0.4-ohm best around 25 watts. I used 70/30 3 mg juice in the 0.4-ohm coil and the flavor was good, but the nicotine was low for my tolerance as I'm used to vaping 3 mg at 100+ watts. But that's a personal thing, and the flavor was good for a 25-watt coil.
What juice is best for 0.6 ohm coil?
For 0.8/0.6Ω coils start with 60% VG or 70% VG and use that as a guide. For 0.5Ω coils start with 70% VG and use that as a guide. Just try a small amount until you know how your coil/device is performing with your particular juice flavour/blend.
What is the difference between a 0.6 and 1.2 coil?
The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
Is 70/30 PG VG good?
70% VG/30% PG: (70/30) This is the best level for those who are interested in lots of vapor but still want to notice at least a little throat hit as well. 30/70 produces a smooth feeling that doesn't overpower them when inhaling, and big clouds when exhaling.
Does high VG juice burn coils?
If your juice doesn't soak into the wick as quickly, you're more likely to run into dry puffs and possibly burn your wicks. This means that juices with a high VG content (70 % or higher) can cause problems with wicking and may ruin your coils.
What juice is best for 0.4 ohm coil?
Coils of 0.4 ohm and lower The amount of VG will usually need to be anything from 50% VG, and in some cases the user's preference is 100% VG. Remember, if you're not a sub ohm vaper, you may well be disappointed if you buy some of the more expensive thicker VG eliquids because they're designed for sub ohm coils.
What's the difference between 0.6 and 1.4 coil?
Nord 0.6Ω mesh coil and 1.4Ω regular coil. The 0.6Ω mesh coil is specially designed for sub-ohm vaping, it has a large mesh inside, with which you can get faster heating process and massive vapour clouds; and the 1.4Ω regular coil is designed for MTL vaping, you can enjoy throat hit with it.
What wattage should I vape at 0.4 ohm?
between 23-28 wattsThe 0.4ohm coil option performs at its best when used in higher wattage modes between 23-28 watts. The 1.2ohm coil option is best suited for use with either a classic or nicotine salt e-liquid, while the 0.4ohm coil performs best when vaped with a higher VG sub ohm e-juice.
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
Angel Eyes Senior Member Verified Member ECF Veteran
need replacement coils, so which of those 4 coil resistances should I buy, and why?
Trayce Moved On ECF Veteran
Well I'm no electrical engineer but I vape 100% VG and it doesn't matter what the coil resistance is if you have a VV or VV/VW mod as you can adjust the power to find the sweet spot.
Angel Eyes Senior Member Verified Member ECF Veteran
well being an electrical engineer myself, I understand resistance, wattage, current and voltage - I just don't know which combination makes for the tastiest vapes, using 100% VG, and I don't have the time to do a lot of controlled experimentation.
Trayce Moved On ECF Veteran
As you know, juice has a sweet spot... turn down the power and you lose flavor and vapor, turn it up and you burn it. Right before it gets to the burny point, that's where you want to be. Point is, you can reach that sweet spot using any coil at all, of any resistance, from sub-ohm to 3.0 ohms and greater.
What is rebuildable coil?
Rebuildable vape coils take flavour and cloud production one step further than Sub Ohm / Direct to Lung coils. Experienced vapers with good knowledge of Ohm’s law and battery safety may choose to rebuild coils in order to use specific resistance levels and other metals, such as Titanium or Nickel. In turn, this allows people to create highly personalised custom vaping sessions that can’t be experienced when using other coils.
What is DTL vaping?
DTL is considered to be the more advanced method of vaping, which involves inhaling vapour directly into the lungs with one 3-5 second long draw. Sub Ohm / Direct to lung coils are low resistance (less than 1.0 Ohm) with the ability to produce larger vapour clouds.
What is MTL coil?
MTL refers to the beginner-friendly method of vaping, which involves slowly drawing vapour into the mouth before pausing and inhaling it into the lungs. Mouth to lung coils are high resistance (1.0 Ohm or higher), which means they produce less vapour but are able to provide enhanced e-liquid flavour. Due to their low vapour production, MTL coils also tend to last longer.
What makes a vape warmer?
Warmer vapor and larger clouds are produced by low resistance coils while a cooler vape with less current is produced by high resistance. Despite its importance, the coil has a fairly simple mechanism. It is constructed from a coiled wire or a piece of mesh as well as wicking material (typically cotton).
What is dual coil atomizer?
Another new one are dual coil atomizers that use an equal amount of electricity to both coils, which help to lower the overall resistance. The dual coils use so much power, which begs the question “which battery do you need?” rather than “what tank do you need?”. With RDAs, there are different kinds of decks, some of which are equipped for dual or even triple coils which allows for better production of vapor.
What is nichrome vape?
Nichrome combines 80% Chromium and 20% Nickel, which allows it to heat up much faster compared to Kanthal, producing large amounts of cloud and providing a pleasant, warm vape. Nichrome is only used in wattage mode and Sub Ohm vapers love it because of this along with its quick ramp up time.
Can you make or mar your vape experience?
You can make or mar your vaping experience just by picking the right coil, which is why it’s important that you know what types there are, what their benefits are and the properties of each type. It will greatly help you by using this guide as a starting point, and then researching your coil before using it. Don’t forget to check if it is compatible with your vape pen or dry herb vaporizer device before using.
How do vape coils work?
Coils, which are sometimes referred to as atomisers, are the component of your vaping device that creates vapour.
What are the different types of coil?
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette.
DuoPrime – a new era for coil design
At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
What are the ingredients in e-liquid?
The two main ingredients of e-liquid are VG (Vegetable Glycerin) and Propylene Glycol (PG), which are both widely found in food and medicine. The levels of VG and PG will always add up to 100%, for example, 70% VG / 30% PG or 50% VG / 50% PG.
Mesh Coil Vape Tank
Mesh coil vape tanks are simple to use, can be used at high wattages, and produce excellent flavor – providing you get the right one.
RDA Vape Tank
An RDA tank will produce the most flavor and deliver the biggest clouds. If you’re after flavor and clouds, an RDA is the way to go – nothing else can touch these tanks in this regard.
RTA Vape Tank
I like RTA tanks. They’re basically a combination of a standard sub-ohm tank and an RDA. Theoretically, you get the best of both worlds: RDA-grade flavor and the juice capacity of a mesh coil tank.
Best Overall?
If you want maximum flavor and clouds, your best bet is an RDA. RDA tanks were designed specifically for use with high VG vape juice. They produce the largest amounts of vapor and will give you the best flavor.
What does PG stand for in vaping?
PG stands for Propylene Glycol, a petroleum by-product. The fluid has no odor or color and is less viscous than VG. In vaping it is used to provide a ‘throat hit’, which some users claim is similar to the sensation experienced when smoking tobacco.
What tanks are susceptible to high VG?
Older products are especially susceptible, particularly models that use smaller coils such as clearomizers. The Nautilus range and eGo tanks are some of the more well-known tanks that are known to have difficulties dealing with high VG fluid.
What flavors go well with PG?
Tobaccos, fruits and beverage flavors often go well with PG, as the sharpness of the PG blends well with the tart or fizz of the flavoring. Similarly, flavors based on cream, custard and yogurt tend to work well with high VG as the thick mouth sensation adds to the dessert-like feel.
What is the difference between e-liquid and e-liquid?
They have distinct mouth and throat sensations when vaped. Most modern e-liquid uses a combination of the two fluids, though the ratio can vary dramatically.
Can you drink e-liquid with propylene glycol?
Many vendors offer this option. The most common side effects of using e-liquid containing propylene glycol are symptoms of dehydration, like dry mouth, sore throat, and increased thirst. It is advised to drink more water and liquids than usual for the first few weeks of using your e-cigarette.
Is propylene glycol safe to eat?
Studies have shown that PG is safe to ingest orally, and the FDA has deemed it “generally recognized as safe” to be used as a food additive. However, most studies into the safety of propylene glycol look at ingestion, rather than consuming it in aerosol form.
Is PG a vaping substance?
Many misinformed scaremongering stories in the media claim that PG is a toxic substance used in anti-freeze. However, there are two types of anti-freeze: toxic and “non-toxic”. The toxic anti-freeze uses the dangerous substance referred to as ethylene glycol, which is not used in vaping.
