If it's 70/30 VG/PG, it'll vape just fine with all Z coils. If it's 70/30 PG/VG, then it's going to be less viscous and lower Ohm coils which often have much larger juice ports built into the coil heads may end up seeping through your coil causing your chimney to flood. Flavor wise, you can expect a stronger throat hit and less vape clouds.
Full Answer
What are the best vape coils to use?
Kanthal coils are only suitable to be used in wattage mode. However, it’s a soft and easy to work with wire whilst also holding its shape nicely, making it a popular option to work with for many vapers. The number of nickel wires on offer can be dizzyingly confusing, so look out for Ni200 wire, which is a 99.6% nickel alloy.
How many watts (W) does a vape coil use?
Modern coils will most often have an advised power level printed on them, usually recorded in Watts (W), for example, 40 - 55W. If you stay between this range you’ll have a far better vaping experience.
What e-juice burns through vape coils the fastest?
High wattage, sweet flavours and a high VG e-juice (usually factors in cloud chasing) will burn through coils and wicking material faster. The best way to educate yourself on changing your vape coils is to use the various YouTube tutorials on the topic, because they offer a visual guide too.
How to use e juice in a coil?
Slowly drip E Juice through the mesh (at the top) and onto the cotton. Do a few drops, then wait. Check the wicking holes on the side, they should be saturated with juice. If they’re not, keep dripping E Juice until they are. Once your coil is properly primed, seal the tank up and fill her up with E Juice.
What ohm is best for 70/30 Juice?
70/30 VG/PG – Designed for coils below 1.0 ohms, which produce the most vapour from sub ohm vaping. 80/20 VG/PG – Perfect for coils at 0.5 ohms or below, you can create huge clouds without losing flavour.
How do I know what coil to use in my vape?
Vape coils generally have an ohm range of 2.4-2.8 ohms, with lots of people enjoying a resistance of 2.5ohms. Low ohm vape coils produce more vapour and flavour and case use more e-liquid and take more battery power than high ohms. High ohm e-cig coils produce less vapour and use less e-liquid and battery.
What coils are best for e juice?
Best e-liquid blends for ecig coils explainedCoils of 1.5Ω - 2.5Ω If you're just getting to grips with vaping, and you're using a standard type of coil, it's ideal to start with a 70% PG e-liquid. ... Coils of 1.0Ω - 1.4Ω ... Coils less than 1.0Ω (sub-Ohm) ... Throat hit. ... Smoothness. ... E-Liquid blends. ... Nicotine levels. ... Airflow control.More items...•
Is 0.6 or 0.4 coil better?
I found the 0.6-ohm best around 12 watts and the 0.4-ohm best around 25 watts. I used 70/30 3 mg juice in the 0.4-ohm coil and the flavor was good, but the nicotine was low for my tolerance as I'm used to vaping 3 mg at 100+ watts. But that's a personal thing, and the flavor was good for a 25-watt coil.
What is the difference between a 0.6 and 1.2 coil?
The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
What's the difference between 0.2 and 0.4 ohm coil?
The lower resistance 0.2 ohm coils allow higher wattage to be used. This said, in this case, the 0.4 ohm coils give much better flavour with the Cleito tank than the 0.2 ohm coils.
What juice is best for 0.4 ohm coil?
Coils of 0.4 ohm and lower The amount of VG will usually need to be anything from 50% VG, and in some cases the user's preference is 100% VG. Remember, if you're not a sub ohm vaper, you may well be disappointed if you buy some of the more expensive thicker VG eliquids because they're designed for sub ohm coils.
What juice is best for 0.16 ohm coil?
You can still use many of the short fills used with the 0.16ohm coils above, but for conserving your coils the best juices are the lower VG e liquids. Vapour Days UK and the Cherub brands of e liquids come in 10ml bottles and offer a wide range of flavours and nicotine strengths to suit all vapers.
Can I use 70/30 Juice in Smok Nord?
It could handle 70/30 VG well, but the DL coils are more suitable for this. From my experience, I can usually can get through about at least 10-15 mL per coil head when using the SMOK Nord.
Is 1.4 coil for salt nic?
Most pod mod vapers find that somewhere between 1.0 and 1.4 ohms is the sweet spot when it comes to 50mg salt nic e-liquids. In most cases, anything lower will result in a burnt taste and harsh sensation, and anything higher will produce very little vapor, not to mention a weak nicotine hit.
How many watts can a 0.4 ohm coil?
between 23-28 wattsThe 0.4ohm coil option performs at its best when used in higher wattage modes between 23-28 watts. The 1.2ohm coil option is best suited for use with either a classic or nicotine salt e-liquid, while the 0.4ohm coil performs best when vaped with a higher VG sub ohm e-juice.
What ohm should I vape at?
The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
What is the resistance of a vape coil?
Resistance and Wattage Range. Every vape coil has an electrical resistance measured in ohms and a suggested wattage range in which the coil operates most efficiently. If you operate the coil below the suggested wattage range, it'll heat slowly and may have poor vapor production.
What vape tanks use mesh coils?
Some modern tanks that use mesh coils include the Uwell Crown 4, the SMOK TFV16 and the Freemax Mesh Pro. A standard coil uses a heating wire twisted into a coil shape.
What is the best heating wire for vaping?
The most popular heating wire materials for vape coils today are stainless steel and an alloy called kanthal . There is little functional difference between the two except that some vape mods have the ability to limit your vaping temperature and prevent burning the wick if you use a stainless steel coil.
What is the best wick material for vaping?
The type of material that a vape coil uses for its wick can have a major impact on the quality of your vaping experience. Cotton is the most popular wick material because it provides a good balance between durability, efficiency and flavor quality.
How often should I replace my coil?
If you're a heavy vaper who prefers sweetened e-liquids, you may need a new coil every few days.
What is a mesh coil?
A mesh coil, on the other hand, uses a strip of metal mesh as its heating surface. Compared to heating wire, mesh is much more efficient and heats more quickly at lower wattage settings. If you're buying a new vape tank today, we'd strongly suggest buying a tank capable of using mesh coils.
Why do you need coils in a vape?
You need coils in order for your atomizer or tank to heat up and create the fatty flavor filled clouds that we all love.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to prime a new coil?
To prime a new coil; install it into the base of your tank, take your e-liquid bottle and drip a small amount of e-liquid onto the exposed cotton. Repeat this process around three times, then reassemble and fill your tank as normal.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
What is a vape coil?
The vape coil is a lot like the heart of your mod or e-cigarette kit, it’s the unit responsible for heating up the e-liquid and vapourising it. The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire. You’d then measure this resistance with the help of an Ohmmeter.
How to replace a coil in a tank?
However, there are a few general steps you can follow regardless of which variety you have when you’re replacing an old coil. Unscrew the battery from the tank. Turn the tank upside down and unscrew the metal bottom cap. Unscrew the coil head from the bottom cap and screw the new coil into it.
What is the difference between a low resistance coil and a high resistance coil?
Low resistance coils produce warmer vapour and larger clouds, whereas high resistance coils produce a cooler vape with less current. Despite being so integral, the coil is a fairly simple mechanism. It’s constructed from a coiled wire or a piece of mesh and some wicking material (usually cotton).
Why is my vape coil burning?
The reason for this is that the tank is running too hot for the coil to manage it. Sometimes chain vaping can also affect the lifespan of your coil as it can get too hot and start to burn the coil. If you inspect your coil and wicking material more closely, you’ll see that the cotton is often discoloured and burnt.
What is Kanthal coil?
KANTHAL COIL. Kanthal is a combination of iron, chromium and aluminium and is a popular wire used in both pre-made and home made coils. It has a super quick ramp up time and as such, creates impressive amounts of vapour. Kanthal coils are only suitable to be used in wattage mode.
What is ceramic coil?
A ceramic coil material is porous, so air passes through it particularly well and offers a super smooth draw. Many reviewers find that the ceramic material brings out the flavour more than other materials. They tolerate high wattages well too so they’re a great addition to the more high-powered mods on the market. Ceramic coils have also been touted to last longer than cotton coils and help prevent dry hits.
How to make a wire glow?
Oxidise the wire: Cut a 4-5 inch piece of wire, hold one end with tweezers or pliers and heat the wire at the other end until it glows orange. Slowly move the flame down the length of the wire until it all glows orange. Then swap sides and repeat the same steps. This will make the wire much easier to work with.
Should I Use High or Low Resistance Coils?
Two different types of vape coil. The ultimate question. ‘Should I use high or low resistance coils?’ Whichever you choose, myCigara are here to support you.
What are Vape Coils?
Vape Coils are one of the most important components of any vaping kit. Every vaping device is built around a coil, which is tucked away safely inside.
Resistance 101
As briefly mentioned, the type of vape coil you use may vary due to its material, but also its resistance. The last time you heard that word was probably during a GCSE Science lesson, but resistance levels are an incredibly crucial part of vaping. Every electrical device has resistance and exists to keep us safe.
Low Resistance Coils
Low Resistance coils (often referred to as Sub Ohm coils) have a resistance that is below 1.0 Ohm, which is why they are called ‘Sub’ Ohm. These coils are stereotypically associated with more experienced vapers and they are often found with more advanced vaping kits.
Should I Use High or Low Resistance Coils?
The answer is…completely up to you! Here at myCigara, we understand that vaping is an exciting journey of getting to know your device, flavours and what suits you. However, we do have some honest advice that keeps you directly in mind.
How long should I let my vape tank sit?
In order to make sure everything works perfectly from the first draw, I’ll let the tank sit with vape juice in it for 10-15 minutes – this takes care of any dry spots on the coil you might have missed. Once the 15 minutes are up, start vaping at a low wattage, then gradually build up until you hit your sweet spot.
How long does a mesh coil last?
A mesh coil, on average, will usually last about 30-50% longer than a standard, wire coil. This is why they were invented.
Why do my coils die out?
Cheap vape juice, or vape juice with tons of additives, is the #1 reason why coils die out too early. Once you have correctly primed your mesh coils, the cotton will be totally saturated and stop and potential dry hits.
Why do sub ohm tanks use mesh coils?
You just need to ensure that the cotton inside the coil head is completely saturated before you take a hit .
How to fill a wicker tank with E juice?
Grab your juice bottle. Slowly drip E Juice through the mesh (at the top) and onto the cotton. Do a few drops, then wait. Check the wicking holes on the side, they should be saturated with juice. If they’re not, keep dripping E Juice until they are. Once your coil is properly primed, seal the tank up and fill her up with E Juice.
When do you get dry hits on a coil?
Dry hits tend to happen most when a coil is new (or when it’s completely burnt out after a week or two of use), so it is important to really focus on getting as much juice onto the coil before installing it in your tank. I use a tissue to do this.
Is mesh coil better than wire?
Mesh coils are A LOT better than the standard wire-based coils you’re used to. For starters, mesh coils have way more surface area to them and this allows for better saturation and more even heating. This to attributes combined makes the vape more flavorful and smooth.
What is DIY vape juice?
DIY vape juice: be the maker and vaper. DIY vape juice is the homemade version of retail e-liquid. The same ingredients are used, but with infinite flexibility and customization. DIY e-liquid is a creative and cost-saving solution to the growing uncertainty surrounding vaping in 2020.
How to make vape juice?
In the simplest terms, making your own e-liquid involves mixing together the main elements that make up e-juice: base liquid of PG and VG, nicotine, and flavor concentrates. You don’t necessarily need all of these, for instance, if you prefer your e-liquid to be nicotine-free or even unflavored.
What are the ingredients in e-liquid?
Here is your checklist: Base liquid – Or in other words, vegetable glycerin and propylene glycol: the two most important ingredients in e-juice.
How to mix DIY e juice?
Methods to mix DIY e-juice: weight and volume . There are two ways to mix DIY e-juice, and each comes with a set of pros and cons. Mixing by weight: with the use of a scale, each ingredient is introduced to the mix by weighing it and taking its specific gravity into account.
How many syringes should I use for a nic?
You should ideally use one syringe per ingredient, but make sure you have at least three syringes for this recipe—one for your nic, one for VG/PG, and one for flavorings. I used to skip measuring VG when I was mixing by volume, and you could also do that if you know exactly how much liquid fits in your bottle.
