" " What Can You Add To Vape Juice To Make It Thicker

Vape-FAQ.com

what can you add to vape juice to make it thicker

by Prof. Diego Jacobi IV Published 2 years ago Updated 1 year ago
image

Distilled Water
Add about 5-7% of distilled warm water into your liquid. Make sure you use purified distilled water from a pharmacy, and do not use tap water.
Nov 20, 2020

Full Answer

Should you add more VG to your vape juice?

Adding more pure VG into your vape juice will significantly improve the density and the size of your clouds. However, the downside to adding more VG is that it will dilute the flavor and possibly lower the nicotine level. In order to boost up the flavor of your juice look for flavorings that are suspended in VG.

How to thicken vape juice?

This may be a bit of a challenge since most commercially sold vape juices are suspended in PG. Put it in a refrigerator. Placing your vape juice bottles in a refrigerator (especially during the summer) can significantly thicken them out. Thickening out vape juice is a pain (as you can see).

Which e-liquids produce the thickest vape clouds?

As a general rule of thumb, an e-liquid that has a higher ratio of VG to PG will produce thicker vape clouds whereas an e-liquid with a higher ratio of PG to VG will deliver a harsher throat 'hit'. Some e-liquids are available with 100% VG. These are designed especially for people who want to produce the thickest vape clouds.

How do I thin out my e-juice?

If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice. 1,3-Propanediol or PDO for short, is a PG alternative. Instead of using VG, you can use PDO to avoid the allergic reaction, but still, maintain some of the characteristics of PG.

image

What makes juice thicker?

Add the cornstarch mixture to the fruit juice and stir them together. Once your cornstarch is mixed with another dry ingredient, pour it into your fruit juice. Stir the ingredients together with a spoon to help the fruit juice thicken.

How can I make my vape juice hit harder?

For a Stronger Throat Hit:Use a higher-nicotine juice: More nicotine equals more throat hit. ... Choose a higher-PG blend: If you have a sub ohm device, a roughly 60:40 VG:PG mix is good, for a pod or basic vape kit you should aim for a bit more PG than that.More items...

How can I make my vape more dense?

As a general rule of thumb, an e-liquid that has a higher ratio of VG to PG will produce thicker vape clouds whereas an e-liquid with a higher ratio of PG to VG will deliver a harsher throat 'hit'. Some e-liquids are available with 100% VG.

Can I add anything to vape juice?

One thing to keep in mind if you do end up adding flavors is that if you use nicotine in your vape juice, adding flavors will dilute it, especially if you use concentrated flavorings (up to 2 mLs). If it's just a few drops then your nicotine content won't change very much.

How do you make your vape harsher?

1:022:02Harsh Vape Fix - How to Get a Smooth Vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipHaving the airflow closed off more will give you more concentrated vapor which gives you moreMoreHaving the airflow closed off more will give you more concentrated vapor which gives you more nicotine which in turn will make it harsher. So if you're using one of these tanks.

Why does my vape burn my throat when I inhale?

Dry Hit. If you inhale when there is no vaping juice to vaporize, you will experience a "dry hit." This can cause a burning sensation that is very uncomfortable. This will temporarily cause a sore throat.

How do I make my vape ring thicker?

Think of your tongue like a conveyor belt.At the same time, bring the lower jaw slightly but rapidly upward. Tuck your lips inward slightly, but rapidly.This will put a "back-spin" on the smoke, helping the ring stay tight. This should create a very beautiful, thick ring of smoke.

Why am I not getting big clouds from my vape?

Increase your power Increasing the power of your device will allow you to vaporize e-liquid at a much quicker pace. People have discovered that vaping with a powerful battery, and a low resistance coil is an effective way to increase vapor production.

What vape juice makes the biggest clouds?

5 of the best e-liquids for cloudsTropika | Twelve Monkeys Classic 50ml. VG:PG 90:10. ... Boulevard Shattered I Wick Liquor 50ml. VG:PG 80:20. ... Double Drip Coil Sauce. VG:PG 70:30/80:20. ... Element Shortfills. VG:PG 80:20. ... Koi Shortfills. VG:PG 80:20. ... VG:PG ratio. ... Devices, coils & vaping style. ... A smoother vape.More items...

Can you put food flavoring in a vape?

But it turns out the food concentrate drops can actually be used for vape juice - as long as they are properly diluted. According to Veppo Cig, vape juice is “a mixture of water, food-grade flavoring, a choice of nicotine levels or zero nicotine, and propylene glycol (PG) or vegetable glycerin (VG).”

Can I put water in my vape?

The answer to this question is no, you will not be able to make cool clouds and shapes with the vapor that comes out of the vape pen. The reason for this is that the vapor that comes out when you put just water in the vape will cool much too fast to produce large clouds, or sometimes any visual vapor at all.

Can u mix wax with vape juice?

Start by placing the gram of wax into the microwavable jar. Then pour a few milliliters (according to the given instruction on the manual) of the liquidizer and pour it on top of the dab. Liquidizers come with different flavors; therefore, ensure that you add the one you prefer.

Vaping Battery Safety

There have been many cases of mods exploding in user’s face, causing some severe injuries. This is often caused by an amateur cloud chasers not understanding their device. Never leave your battery charging unattended. Unattended batteries can end up causing your battery to explode or catch fire. An overcharged cell can have the same results.

Getting Huge Vape Clouds

The correct airflow will contribute to making your vape clouds bigger. If there isn’t enough airflow coming into the device, it can lead to overheating. If there is too much airflow to your mod, it will also affect how big your vapor clouds can be.

How to Make Vape Juice THICKER

Your choice in Mech Sauce e-liquid is another crucial part of creating the biggest clouds. E-liquid is made up of a combination of propylene glycol (PG), vegetable glycerin (VG), flavoring, and nicotine (though many e-liquids are nicotine-free). The correct mix of PG and VG will allow you to create massive clouds without having a harsh throat hit.

Getting the Best Mod for Huge Vape Clouds

The mod that you use is another important part of cloud chasing. You will want to find a mod that offers a high-quality, low resistance coil. An improperly made mod can overheat, explode, or even catch fire.

Best Vaping Technique for Vape Clouds

Your technique is an incredibly important aspect of huge cloud creation. Those with the biggest lung capacity will have an easier time creating huge clouds of vapor. When you exhale, exhale slowly to make your clouds appear bigger, thanks to slower dispersion.

ABSORBENT WICKING MATERIALS

Wicking is another critical aspect of cloud chasing. Inside of the atomizer, an absorbent wick helps your e-liquid get to the vaporizing coil. A wick that is more absorbent will help your juice reach the coil quicker, as well as allowing for a good amount of e-liquid to remain near the coil.

BUILDING YOUR OWN VAPE CLOUD DEVICE

Many cloud chasers choose to make their own devices. By using low-resistance coils and having the perfect airflow, you will create much larger vape clouds. There is no single best option when it comes to building your MOD, coils, or RDA/RBA, so you will have to experiment with it to find the perfect cloud chasing device.

What is the ratio of vape clouds?

A huge factor when it comes to vape clouds is the PG:VG ratio present in the e-liquid you are using. Depending on the e-liquid, you could see ratios of 50:50, 80:20, and 40:60, for example.

What is the difference between VG and PG in vape?

As a general rule of thumb, an e-liquid that has a higher ratio of VG to PG will produce thicker vape clouds whereas an e-liquid with a higher ratio of PG to VG will deliver a harsher throat 'hit'. Some e-liquids are available with 100% VG. These are designed especially for people who want to produce the thickest vape clouds.

How to get thick clouds on a vape?

1. Look at Your Device's Power. In short, the higher the voltage of your device's battery, the more intense your vaping experience will be, and the bigger your vape clouds will be, too. If you have a device with a low voltage (e.g. traditional e-cigs and basic vape pens) then you may struggle to get thick clouds.

Why do vapes have bigger clouds?

Increasing the device's airflow can also result in bigger clouds. When more air is flowing through your vape, the coil's temperature is kept low and this creates a cooling effect that aids the condensation process. Again, we will look at a device with adjustable airflow later.

Why do people call vapour smoke?

Many people call vapour 'vape smoke' because it looks like cigarette smoke, however, the two could not be any more different .

What is smoke in science?

Smoke is "a visible suspension of carbon or other particles in the air, typically one emitted from a burning substance" by its literal definition. To create smoke, you need to combust (burn) something. When combustion takes place, oxidation creates new chemicals and other by-products.

What is a vapor?

Vapour vapor is "a substance diffused or suspended in the air, especially one normally liquid or solid" by definition and materially different to smoke. Chemicals found in vapour are the same as those found in the substance that has been vaporised.

brandon555 Super Member Verified Member ECF Veteran

I really like the Nhaler high voltage juice ... Nice and thick and perfect for dripping.... From what I understand though its just regular Dekang/Chinese juice that has been thickened somehow.

Happy Domino38 Moved On ECF Veteran

Not horribly helpful, I know, but that's pretty much your only option...

Nikhil Unregistered Supplier ECF Veteran

If you want to thicken it with VG and add flavor as well, you will still lose nicotine strength. The best way to go about getting a specific thickness is to start from scratch, and you can make your own level of flavor and nicotine strength. FlavourArt and Seedman's have a lot of tobacco flavorings, and Perfumer's Apprentice has a Tobacco Absolute.

sanfordf Ultra Member Verified Member ECF Veteran

You can increase the thickness of regular glycerin (VG) with a powdered version.

nubee Ultra Member ECF Veteran

I've added a few drops of VG to many of my juices without much loss of flavor or nic hit. Now it is only drops and not %/ml but it seems to help in the vapor production.

Richie G Ultra Member Verified Member ECF Veteran

If it is feasible, stick the e-liquid in the refrigerator for about an hour and it will thicken right up -- especially this time of year.

sanfordf Ultra Member Verified Member ECF Veteran

I think it (VG) may also evaporate, if left exposed. Possibly getting thicker (?). I'll have to experiment.

Use of Liquidizers

It is simply impossible for waxes to be vaporized in an oil vape since they are thick and viscous. Specialized wax pens are needed that are much more complicated than simple vape batteries and oil cartridges. A wax, shatter or concentrate liquidizer is used to turn wax or any concentrate into vape juice.

Adjusting ratios of liquidizer and concentrate

You can easily create your own e-juice. The liquidizer should be mixed 2:1 with the concentrates or until the oil is thick and thickens. The manufacturer recommends this as a starting point. Depending on your preferences, you can adjust this ratio to make stronger juices or thicker juices.

Thickening of the liquidizer

If the liquidizer and concentrate mixture is too thin then it will malfunction. Too thin of a liquidizer or inappropriate proportions of the concentrate and liquidizer can lead to a leakage. The vape juice will start leaking and it will taste nasty too.

What is the difference between VG and PG vape juice?

VG-based juice: This juice offers thick and big clouds as its consistency is thick. Its nicotine strength is low. Flavors: Vape juice contains different types of food flavors.

How much water should I use to dilute vape juice?

Those rules are: Can not use water more than five percent. The water should be distilled water. The ratio should be one drop of distilled water per 2ml. If your vape juice has a high VG level, then you can use water.

How many flavors of vape juice are there?

Its nicotine strength is low. Flavors: Vape juice contains different types of food flavors. There are more than 4000 flavors in vape juice. Some of them are strong; some of them are mild.

What is the liquid used to make vapor?

Dilute Vape Juice With Water. The liquid used in electronic cigarettes or vape to make vapor is known as Vape Juice. It is also known as vapor liquid or e-juice or e-liquid. Vape juice has different types of color and flavor according to its user’s demand. Its main job is to replace the traditional tobacco flavor and to make vapor.

Why can't I dilute vape juice?

Those reasons are: If you use more water, then it can burn your lips, tongue and throat. Diluting vape juice with water makes it too wet and too hot.

What is the ratio of vape juice?

Ratios of vape juice: Vape juice comes in different types of ratios. It is the ratio between VG and PG. If your vape juice states 60/40, it means it’s 60 percent contains PG and 40 percent contains VG. PG based juice: Those who want to give up smoking mainly use this type of liquid.

Is it safe to drink vape juice with water?

Diluting vape juice with water means inhaling more H2O in your lungs, and this is not good for your health. As lungs are a very important organ of our body so you should be very careful about them; otherwise, it can be dangerous for your health. So it is advised not to add water to your vape juice. Let the experts do it.

How much distilled water should I use for vodka?

Distilled water is typically recommended at the same percentages of vodka, so about 5-7%. You want to get purified, distilled water, preferably from a pharmacy or online from a reputable seller so that you know it’s sanitized and safe. Don’t use tap water.

What is WFI water?

Water For Injection (WFI) Water for injection is water designed for medicinal use, such as for diluting or dissolving drugs to be injected into the body. This is a sterilized water that has no bacteria, antimicrobial agents, or added buffer.

Is vodka bad for vaping?

You might think adding vodka is dangerous, but you might not realize that a lot of the flavor concentrates that we use for vaping already have alcohol in them. It’s not a large amount of alcohol and not all flavors have alcohol, but if you vape, you’ve probably vaped e-juice that has alcohol.

Can you use vodka to clean coil heads?

It’s generally considered safe and is actually why many people suggest soaking old coil heads in vodka to clean them and reuse them . If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.

Is 1,3-propanediol a PG?

1,3-Propanediol or PDO for short, is a PG alternative. Instead of using VG, you can use PDO to avoid the allergic reaction, but still, maintain some of the characteristics of PG. The issue with PDO is that it’s a little more expensive than VG or PG and it doesn’t carry flavor as well as PG. But it’s an option if you want to try it.

Can you use tap water?

Don’t use tap water. People in the past have used de-ionized water, but it’s not recommended anymore. De-ionized water only has minerals removed, but it’s not sterile and may contain microorganisms or bacteria. It’s not designed for food consumption.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9