Ni TC = (Ni200) Nickel Wire Mode Ti TC = Titanium Wire Mode SS TC = Stainless Steel Wire Mode M1/M2/M3 = TCR Memory Modes (User changeable TCR value, for fine tuning different wire types) Kanthal/Nichrome wire is to be used in Power Mode
Full Answer
What are Titi and Ni/SS coils?
Ti, Ni, and SS are there for different types of coils and Temperature Control vaping; you can make/use coils from titanium, nickel, and stainless steel, and these all require proprietary settings to run optimally. If you’re just running the SMOK coil that came with the kit, just stick to wattage mode, as that is designed for standard power modes.
What is the difference between ss/ni/ti and TC?
The SS/Ni/Ti are preset materials, the TC mode presumably lets you enter your own TCR. With SS you usually have to do that because there's not 1 TCR that applies to all SS (range from about 88 to 115). I don't have a mod with vaporesso chip so I can't go into detail, didn't you get a user manual along with your mod ?
What does the number on a vape coil mean?
Wellon Vape experts told Olivia that it’s basically a number that describes how the resistance of metal in our coils changes as it changes temperature. It relates to the resistance and corresponding heat of a particular type of alloy used in a coil. Less resistance translates into more heat, faster.
What are the different vaping modes and settings?
The first setting you will encounter is the MODE SETTING. In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.
What is SS mode on a vape?
Stainless Steel Mode (SS Mode) It shares nickel and titanium's fast ramp-up speed, but does not oxidize when dry burned, giving you more ability to adjust your coils when they're heated. Stainless steel is also not known to cause any adverse allergic reactions.
What does SS ni ti mean on vape?
SS can be used in wattage or temperature control mode. Nickel 200: commonly known as ni200, it was the first temperature control coil but it's less common now due to some vapers having sensitivities to nickel. Titanium Grade 1: otherwise known as Ti.
What is TC NI mode vape?
TC mode is like a car that allows you to put the pedal right down, but you can also gently tap it to move the vehicle ahead slowly. With some mods you can set a custom curve, allowing you to control the speed and rate at which a coil is ramped up. This is a huge leap forward for the vaping industry.
What are the different settings on a vape?
What Are the Different Vaping Modes and What Do They Mean?Variable Wattage and Variable Voltage Mode. When you turn a vape mod on for the first time, it'll probably start in variable wattage mode. ... Temperature Control Mode. ... Wattage Curve Mode. ... Bypass Mode. ... Smart Vaping Mode.
What should my Smok vape be set at?
For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage.
What does A and P mean on a vape?
You can scroll through these three modes, labelled A, P and A&P on the screen, by pressing the fire button three times consecutively. In A&P, you're free to simply draw on the mouthpiece or press the fire button; both will activate the built-in battery.
What is Ni mode?
Appropriate Wire Materials: Nickel (Ni) Nickel Mode (or Ni Mode) is used only for nickel wire. Nickel is revered for its rapid temperature ramp-up, but since it is a softer metal than others, it can be difficult coil with. You should always avoid dry burning nickel coils because this will oxidize the metal, ruining the wire.
What is TC mode in vaping?
Rather than measuring the amount of power going to your coil, Temperature Control Mode (or TC Mode) allows you to set the exact temperature that you want your coils to heat to. This means that you’ll be getting an even heating every time you fire your device, giving you more control over your vaping experience, and limiting the risk of burning your wick.
What is titanium mode?
Titanium Mode (or Ti Mode) is a specific mode only to be used with titanium wire. Like nickel, titanium boasts a quick heat ramp-up, but does not cause allergic reactions in its users. However, titanium does oxidize when dry heated, so you’ll want to make sure not to fire your coils before they are wet.
What are memory modes in Minecraft?
Many advanced mods will have specific modes reserved for memory settings, which is essentially several different modes where the device remembers your setting for easy access. These modes are normally referred to as Memory Modes, signified by the abbreviations M1, M2, M3, and so on, depending on the number of Memory Modes your mod allows. Memory Modes are great if you are frequently changing between different types of tanks and want a convenient way to save those settings and switch between them without any hassle.
What is the most common mod setting?
Wattage and Voltage Mode, also referred to as Power Mode, is the most common mod setting for vapers because of its simplicity and effectiveness. With Power Mode, you will be setting the amount of total power going directly to the coil. Wattage (likely the most used setting among vapers) is the unit used to express power per second, ...
What is bypass mode?
Although it isn’t used by very many vapers, Bypass Mode gives you the ability to fire your device with the level of raw power available in your batteries. This means that you can go beyond the allowances of traditional Power Mode or Temperature Control Mode settings, enabling you to build coils at lower resistances than those settings permit. Since Bypass Mode has no cap on wattage, voltage, or temperature, this setting is not recommended for beginners, as it could easily burn your wick and ruin your coils.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
Do stainless steel tanks come with coils?
While stainless steel is still popular, the majority of tanks don’t come with TC-ready coils. If you want to vape in TC, and you are not interested in building your own coils, truth is that your choices are limited.
What is bypass mode in vape?
Bypass mode is one of the simplest “advanced” vape modes because it actually removes the key feature of a variable wattage mod. You literally “bypass” the features of the mod and it instead performs more like a mechanical mod, essentially delivering power based on your remaining battery life and the resistance of the coil you’re using. This means that your effective wattage will be higher when the battery or batteries are fully charged and lower as you continue vaping throughout the day.
What is super player mode on Vaporesso?
Super Player mode (available with the Swag II) is another Vaporesso speciality, which essentially allows you to use coils with a wider range of resistances than the device usually supports, down to 0.03Ω (and up to 5Ω) for the Omni Board 4.0 (and up to the more recent V 4.2). This is a really great feature if you build your own coils, because while you’re unlikely to find a pre-made coil with such a low resistance, you may build one of your own that you struggle to use with the hard-coded restrictions on regulated devices.
What is TC vaping?
Temperature control (TC) vaping is really “temperature limiting,” in that you effectively set a maximum temperature you want your coil to reach and your device ensures it stays within this limit. This means that mods can avoid “dry hits,” and even if you fire your device with almost nothing in the tank it won’t “overcook” your juice or burn the coil’s cotton. In normal use it gives you more consistent performance because it levels out the usual spikes and drops in temperature.
What coils are used for TC?
The most common coil materials for TC vaping are nickel (Ni200), titanium (Ti) and stainless steel (SS), and to work well in TC mode, your mod needs to know which one you are using.
How does Coolfire Z80 work?
With the Coolfire Z80, you can enter the menu and get the device to prime the coil for you. The device then heats the e-liquid up at 50% of normal power to draw e-liquid into the coil, helping with both flavour and co il life. Neither are advanced, though both are a major step forward in technology.
How fast does an Innokin fire?
For the Innokin Kroma R, this is classed as within 0.003 seconds, and it’s safe to say that, for all intents and purposes, this essentially means instant firing.
Can you use Kanthal for TC vaping?
Kanthal, for example, barely changes resistance as it gets hotter (and so you can’t use it for TC vaping), but other materials like nickel have a more noticeable response and are much more suitable for TC vaping. The TCR values tell you the strength of this response.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
What does TCR stand for in vapes?
What is Vape TCR Mode? Vape TCR stands for Temperature Coefficient of Resistance. Wellon Vape experts told Olivia that it’s basically a number that describes how the resistance of metal in our coils changes as it changes temperature.
Does temperature control work on vaping?
Temperature control in vaping devices doesn’t actually measure the heat of the coils, but how easily electricity passes through the metal. That’s why when coils go dry and get warmer, the TC controls kick in.