You have to experiment to find the most satisfying setting. When you put a new coil in, start off very low, (I start at 15 watts) whether you're using Watts or Temp. Be sure to prime the coil well and when you start using it, take frequent small draws.
Full Answer
What is the target mini II vape?
The Target Mini II is one of the latest kits from popular vape manufacturer Vaporesso. They have been one of the top mod makers in the industry with devices like the Armour Pro, Luxe and Polar.
What are the different modes of the vaporesso target mini?
The Vaporesso Target Mini is surprisingly packed with features and modes. You have Power mode (with Hard, Normal, and Soft Preheat), Voltage Mode, Bypass Mode, Temp Curve Mode, Volt Curve Mode, Watt Curve Mode, Super Player Mode (which is just power mode with a lower minimum resistance).
How do I increase the wattage of my vape?
Power on your mod at a low wattage, 10-12 watts puff again a few times. Gradually increase and repeat until you reach desired setting. This should solve problem. If not, consult local vape store.
How many watts do you vape on average?
I vary the wattage depending on what I'm vaping. I usually vape 80VG and tend to stay between 25-28 watts. If I was vaping a higher PG juice I'd probably reduce the watts a bit. You have to experiment to find the most satisfying setting. When you put a new coil in, start off very low, (I start at 15 watts) whether you're using Watts or Temp.
How do I set my Vaporesso target Mini?
After charging the Vaporesso Target Mini 2 and filling the tank, press the fire button five times quickly to turn the device on. To vape, simply puff on the tank's mouthpiece while holding the fire button. To adjust the device's heat and vapour production, press the “+” and “-“ buttons to change the wattage.
How do I adjust my Vaporesso?
General Settings:Press the fire button for 5 times in 2s: Power on and off.Continuously pressing fire button 3 times to lock and unlock the up, down and mode button. Continuously pressing mode button 3 times to unlock the mode button.More items...•
What is SP mode Vaporesso?
Super Player mode (available with the Swag II) is another Vaporesso speciality, which essentially allows you to use coils with a wider range of resistances than the device usually supports, down to 0.03Ω (and up to 5Ω) for the Omni Board 4.0 (and up to the more recent V 4.2).
What coil does the target Mini use?
CCELL coilsThe TARGET MINI adopts compact design to give you the perfect hand feel. The GUARDIAN tank on top with CCELL coils use ceramic materials to get the purest flavor from your e-juice. The stainless steel glass cover also guarantees safety while you enjoy vaping.
What settings should my vape be on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What is TC mode vape?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).
What is puff setting on vape?
The Function of the “Puff” Menu: This menu is designed to manage the vaping plan, it can help SMOK users to calculate the vaping puffs, setting personal plans. When the vape reminds for "max puff" or "puffs over", it means the vaping puffs have reached the Maximum.
What wattage should I vape at 0.15 ohm?
60-90 wattsIn contrast, the 0.15ohm dual mesh coils have a best recommended wattage of 60-90 watts. Both atomisers offer huge clouds and flavour production. Since these coils are sub ohm / direct to lung (DTL) in vaping style, they are recommended for use with higher VG e liquids.
What coils are compatible with Vaporesso target Mini?
Vaporesso - EUC Replacement Coils // Target Mini 2 / VM Tanks (5 Pack) These coils are compatible with the new Vaporesso Target Mini 2 Kits and VM Tanks. They will fit into your older devices, such as the Veco and Tarot Nano, too!
How much is a Vaporesso mini?
Vaporesso XROS MINI Kit Price $20.99 Pod System Kit 1000mAh | Vapesourcing.
How long does it take a Vaporesso mini to charge?
It comes with an internal battery listed at 1000 mAh, and they list the charge rate at 1A. I tested their ratings and for the charge rate I got max 1A so great rating there. For charge time, I got 62 minutes. So, again, a great rating—and it charges plenty fast for a pod system.
What is the Vaporesso target mini?
The Vaporesso Target Mini is surprisingly pack ed with features and modes. You have Power mode (with Hard, Normal, and Soft Preheat), Voltage Mode, Bypass Mode, Temp Curve Mode, Volt Curve Mode, Watt Curve Mode, Super Player Mode (which is just power mode with a lower minimum resistance). For Temp control you have modes for Ni200, Ti, SS and two TCR memory slots as well as their Smart and Auto Modes. It uses a standard TCR as well. Same as their GEN mod that I reviewed recently, the Target Mini II has pretty much every mode out there.
How many watts does a Target Mini II have?
The kit contains the Target Mini II, a very compact internal battery mod rated for 50 watts, and the VM22, a tank that’s made for MTL and low-wattage restricted DL vaping. Unlike with the GEN which was powered by the newly introduced Axon chip, the Mini II houses the latest 4.2 edition of the Omni chipset.
What is the correct TCR for SS316?
I set the TCR at 92, which is the correct value for SS316 (88-92). All things considered the mod worked great in TC mode. It hits around 20-30 degrees on the high side, so I got a nice warm vape at 420-430 F. The dry hit protection was great, and the throttle was nice and smooth. Plus, you have the full 50 watts available to adjust your ramp up. Overall, it’s a great mod for vaping in TC if you vape MTL or low-wattage DL.
What is Target Mini II?
The Target Mini II is one of the latest kits from popular vape manufacturer Vaporesso. They have been one of the top mod makers in the industry with devices like the Armour Pro, Luxe and Polar. I recently reviewed the GEN, their latest dual-18650 mod, and found it to be a great performer.
What is a VM22 tank?
This kit comes with the VM22 tank which is made for MTL and low watt restricted DL vaping. The tank comes with a 2 mL capacity and no bubble glass due to the metal cover. They do include a spare though.
How many coils does a VM22 tank have?
The VM22 tank comes with two coil options.
Is Target Mini II a good vape?
All in all, the Target Mini II is a great kit that’s well worth taking a look at both for beginners and avid MTL vapers. Let me know what you think in the comments and thanks for reading!
How many watts does a Target Mini 2 use?
That’s plenty of battery for a device of this size, but of course the battery will die faster if you’re using the Target Mini II at the max of 50 watts all the time.
How to lock Target Mini II?
It’s a nice and big clicky button in a comfortable spot. To lock the device while it’s on, click the firing button three times fast .
What resistance does a Super Player atomizer have?
On the next menu screen you have Super Player mode which lets you run atomizers built at a resistance between 0.03 to 5.0 ohm. It doesn’t really make sense to use a super low resistance atomizer on a low power device like this, but you have that option. You also have variable voltage mode, voltage custom curves, and the first temp control mode, which is for stainless steel.
How to change coils on a scuba diving tank?
Replacing the coils is really easy. Just turn the tank upside down, take off the base, pull out the old coil and plug in a new one.
How many different wattage modes are there on a wattage monitor?
On the first menu screen you can choose from three different variable wattage modes and custom curves mode.
How many memory modes does a Titanium have?
On the next menu screen are two other preset temp control modes, one for Nickel and one for Titanium. And then you have two memory modes so that you can set your favorite modes and settings to memory.
How many watts does a custom curve use?
If you want to fire at 5 watts for 1 second, 10 watts for the next and 50 for the next, you could do that. You can set it however you want.
How many watts does a Target Mini II vape last?
The Target Mini II mod specifically, is great to vape with. It only goes up to 50W and the battery isn’t going to last if used over 20W but for MTL tanks it works flawlessly.
What color is the Vaporesso target mini 2?
There’s a “V” on the back side of the device and “Vaporesso Target Mini II” on the sides but you can barely see them. They’re printed in a bronze color that is almost invisible on the stainless steel.
What coils do you need for a VM22?
This would make a great kit for a beginner vaper but it will satisfy MTL vets all the same. The VM22 tank, paired with the 1.0ohm coil, is a pleasure to vape with. The 0.6ohm coil, not so much, but that’s usually how it goes with kits — one coil usually ends up being the loser.
How to change coils on VM22?
The coils for the VM22 are easy to change. Once you unscrew the airflow control ring from the tank the coil just falls out (so you have to be careful if there’s ejuice in there!). The new coil just pops right in — no securing or pushing needed. It falls right into place.
How to adjust wattage on a coil?
The wattage scrolling is nice and smooth. You can also adjust the wattage in 0.1 increments by pressing the adjustment buttons. This is useful at 11-13W when you’re using the 1.0ohm coil and really want to fine tune your draw.
How many ml can a VM22 hold?
The hole is large enough for all different types of bottles and I was able to fill it with ease. The tank holds a maximum of 2ml of ejuice. 2ml is small for a tank but it will still last a while if you use it with the 1.0ohm coil at 10-13W.
What is the drip tip on a Target Mini 2?
The drip tip that comes on the Target Mini II is the only one that you get. Strange considering that MTL tanks usually come with an additional drip tip. It’s a 510 drip tip and the hole is narrow enough to give a mouth to lung draw. The airflow on the Target Mini II is a single slot which can be adjusted in two ways.
Sirus7heVirus17 New Member
I just got this not too long ago and I've seen in video reviews people blowing HUGE CLOUDS with this and I blow the size of an average cigarette drag. What is the best vape setting someone can tell me ? Each time I try and change the settings I start too pull and my lips BURN and can't even pull the smoke in because my lungs kill right after.
Continuity Super Member ECF Veteran
Your question makes no sense at all without knowing what tank you're using and what type of coils are in it.
NealBJr Ultra Member ECF Veteran
I just got this not too long ago and I've seen in video reviews people blowing HUGE CLOUDS with this and I blow the size of an average cigarette drag. What is the best vape setting someone can tell me ? Each time I try and change the settings I start too pull and my lips BURN and can't even pull the smoke in because my lungs kill right after.
Sirus7heVirus17 New Member
Yah that is the kit I'm using. Whatever coil it comes with I'm using. I'm using 6MG strawberries n creme 0-50% popeyleene And the air flow is all the way open.
TheTinMan Super Member Verified Member ECF Veteran
So it looks like the kit comes with a pre-installed .9 oHm kanthal coil. From what I gather from your post you are using 50PG? What VG? The higher the VG the more cloud.
djsvapour ECF Guru ECF Veteran
Yah that is the kit I'm using. Whatever coil it comes with I'm using. I'm using 6MG strawberries n creme 0-50% popeyleene And the air flow is all the way open.
TheTinMan Super Member Verified Member ECF Veteran
Also here is his review on the mod. He talks about flavor and break in period but doesn't mention what kind of clouds it chucks. I would have to agree with @djsvapour that you may have it in the wrong setting
