A standard e-cig will have a battery capacity of about 200-300mAh, a vape pen will have anywhere from 600-1,000mAh, and vape mods run 2,500mAh and up. Do note though that the battery capacity is in an inverse relationship with the current. If the battery has an amperage of 30A, chances are the capacity won’t be much higher than 1,600mAh.
What size vape battery do vape MODs use?
At the time of writing, several of the more recent mods released are using the 20700 and 21700 size vape battery. However, the most extensively used battery to date is the 18650. These numbers essentially refer to the length and diameter of the vape battery.
What are amps in a vaporizer?
What are Amps? Amps, or amperes, are used to measure the amount of current flowing through your device. As it relates to vaporizers, you want to know how many amps are being pulled from your batteries.
What wattage is best for vaping?
The best wattage for vaping depends on two things: Your own personal tastes (do you want a hot or warm vape?) However, if you go too high for the coil you’re using, it will burn out rapidly and start tasting like ass – the cotton just burns up which is why you get a burnt taste from your vape. Start Low.
What are vape mods and how do they work?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display. In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
What setting should my vape be on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
Is it better to vape at higher wattage?
Basically, a higher wattage is needed to produce the right amount of vapor. -Pod systems are less about lots of vapor, and more about a satisfying nicotine hit – that's why they're made for mouth-to-lung vaping, which introduces a smaller amount of vapor into the mouth before it's inhaled.
What is a good wattage for a mod?
The product information on sub-ohm devices will tell you the optimum wattage settings to use for that mod. For example, a 0.4-ohm mod may recommend a 23 - 28 watt setting, and a 0.8-ohm mod may recommend you use up to 35 watts. Some recommendations can go much higher (e.g., 200 watts).
What watts should I vape at?
What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage. By and large, though, we could say vaping starts to get more exciting between the range of 40 and 50 watts.
What is the correct wattage for vaping?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
Is it better to vape at lower wattage?
Setting your vape to a lower wattage is okay. You can still have a taste of the flavor of the juice, but not like the depth of flavors with a higher wattage. You can achieve a pretty decent vape experience at 10 watts.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
Does higher wattage give more nicotine?
When a vape coil is run at a higher wattage, it's able to create more vapour, thus giving you more nicotine per puff. This also means that the throat hit from your nicotine and PG is increased as well.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
What is sub ohm tank?
Sub-Ohm tanks are designed to produce more clouds. They do this by having a lower resistance (0.2ohms, for instance), and this allows for less electrical resistance which in turn allows for more signal to flow to the atomizer.
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
How many volts does a vape battery have?
They provide nominally 3.7 volts of power, 4.2 volts when fully charged and slowly discharge when used. Once the vape battery is discharged below approx 3 volts, they must be charged again.
How many charges does a vape battery need?
Approximate number of recharges a vape battery can undergo before it’ll no longer hold a charge. Duty cycles can be as high as 500 charges but will vary depending on the specific battery type.
What is the anode of a vape battery?
Most external vape batteries are Lithium Iron (li-ion) and consist of three parts: the cathode (+), the anode (-), and the electrolyte (bit in the middle). The anode of all 18650 li-ion batteries is basically the same; carbon/silicon and graphite.
What is the circuit board on a vape battery?
Batteries have a small circuit board, usually on the bottom of the vape battery, that stops the charging or discharge of the battery in certain circumstances, such as Over-Charge, Over-Discharge and Short-Circuit. These tend to be slightly longer because of the circuitry and are normally classed as ICR.
What is the difference between a mechanical and regulated mod?
A mechanical mod takes power DIRECTLY from the vape battery, which means it’s important to know that the battery is capable of providing the current required to fire the coil.
Do vape batteries have higher discharge rating?
This makes them more suitable for lower wattage devices. On the flip-side, a vape battery with lower Milliamp Hours will tend to have a higher discharge rating (higher Amperage). And you guessed it, this makes them more suitable for higher wattage devices. There is always a compromise between the two.
Can you use a vape mod while charging?
Once the vape battery is no longer chargeable or breaks, the mod becomes useless! It’s also worth mentioning, you’re unable to use the mod while charging unless it has a ‘pass-through’ facility.
What does wattage mean in vaping?
To put it another way, watts is essentially how much power your vape produces and voltage is how much power is put through the device. So, as you increase the wattage the voltage also increases and vice versa.
What is a vape device?
Vape devices use simple circuits that contain a battery, a switch and a heating coil. The circuit is effectively a controlled short, with the power output from the battery used to create heat.
How to get the perfect vape experience?
After all, with most entry-level vape kits, all you need to do is: Check what wattage you can use with the coil in your device. Adjust your wattage and airflow until you get the vapour, flavour and throat hit you need. Some people want to know more to get the perfect vaping experience.
Why do vapes burn out faster?
You will need to increase the voltage to increase the wattage and get a better vape. Because lower resistance coils use more wattage, they tend to generate more heat. This means they often burn out quicker than a higher resistance coil would.
What is the resistance of a sub ohm coil?
The term sub-ohm, while still used, is not as relevant as it used to be. Coils below 1 ohm are common, and coils with a resistance of 0.8 ohms are often used for Mouth-to-Lung vaping. Even lower resistance coils, such as 0.15 coils, are often used for cloud vaping.
How does variable wattage work?
The variable wattage device will then automatically adjust the power going through the atomiser (the voltage) to produce the power output you need (the wattage).
What is the difference between variable voltage and variable wattage?
The difference between variable voltage and variable wattage is a bit like the difference between an automatic and a manual car. With a variable voltage device, you manually control the amount of power (voltage) going through your device.
What is mechanical mod?
Mechanical mods are used only by advanced users who possess a good knowledge of batteries and can be ‘fine-tuned’ to heights of performance not possible with regulated mods. Examples of regulated mods can be found in our list of the best box mods.
How to choose an 18650 battery?
You have to weigh up two major factors when picking 18650 batteries, keeping in mind the symbiotic balance between these two specifications. They are: 1 Density – we usually mean ‘how long the battery can last’ or usage time. Density is measured in milli-Amp hours (variously depicted as mAh or maH, MAh). 2 Discharge – we usually mean the rate of current which the battery can deliver, we tend to think of this as ‘power’ because the higher the current, the higher the wattage output. Discharge is measured in continuous Amps (A).
Do sub ohm vapers need batteries?
If you aren’t sure, sub-Ohm vapers should err on the side of caution and rather pick a high-drain (high current/Amp) battery just in case you floor it in a moment of extreme enthusiasm! The bigger mechanical mods can draw serious current, and you will need batteries built for that purpose.
DrMA Ultra Member ECF Veteran
There are many factors determining the qualities of the vapor, but IMO the one that best answers the OP is the coil area-weighted energy density, expressed in units of energy (W) per area (mm²).
keepsmiling Vaping Master Verified Member ECF Veteran
Now, if they were water hoses they would both fill a bucket at the same rate...but if someone were to spray you with both of those different hoses individually do you think you would be able to tell them apart?
Bunnykiller ECF Guru Verified Member ECF Veteran
yes it matters.... consider you have 2 batteries both with the same voltage, but with different amp ratings. Lets say one was a 1 A rating and a second has a 30A rating.
dr g Moved On ECF Veteran
In the OP example, assuming both coils are made from the same wire, the 3Ω coil will have a much larger surface than the 0.25Ω, but only the same total energy delivered from the battery. The larger coil will have a much lower energy density, thus perform weaker than the subohm coil.
beckdg ECF Guru Verified Member ECF Veteran
Since they both result in the same amount of power going to the coil, just being achieved in different ways, the only difference is the amperage being pulled from your battery in either case.
dr g Moved On ECF Veteran
ok so now we've got a divergent opinion on the matter. This is what seems to always occur, leaving me without a unanimous decision on the subject to put my curiosity as well as my insecurity on the validity of my percipiency of the subject, to rest
RedBeard4081 Full Member
It's not really a divergent opinion. You may be under the mistaken impression that output amps on a regulated circuit are the same as input amps. For example in your original post, your 13v unit can only be achieved with the same battery as the 4v example via a boost circuit.
