Try gently pulling the post upward with some tweezers. Slide one side of the tweezer under the post top and gently edge it up a bit. Work your way around it doing this. I'll bet it fixes it
Full Answer
Why is my vape pen not charging?
Problem #2: My Vape Pen Won’t Charge or Draw The most common reason for this is there isn’t proper contact between the battery and the cartridge, meaning your battery can’t fire the heating coil. This can be solved by adjusting the connection plate inside the thread to get better contact with the battery.
How to fix my vape cartridge is clogged?
Problem #6: My Vape Cartridge Is Clogged 1 Gently Blowing into the mouthpiece 2 Heating the cartridge using a blow drier set at a low temperature, or rubbing the cartridge in between your hands. 3 Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. 4 It also helps to regularly clean your cartridge.
How to use a push button vape pen?
Unlike disposable vape pens which come pre-charged and just require you to pull so as to turn on the battery, push button type vape pens can be trickier. You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my vape pen make my throat feel Scratchy?
The first problem is pretty straight forward, and the solution is to always make sure your vape pen has enough juice in it to avoid that scratchy feeling in your throat. Alternatively, you can check the way you’re drawing and reduce the number of puffs you take in succession.
How do you charge a vision spinner without a charger?
4:155:05How to charge any E cig without a charger - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as thatMoreSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as that and that was off so now it's on. It was off before so that's how you know it was charging.
How do you know if your vision spinner is charging?
0:191:06How to charge a vision spinner battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake a spinner screw. It into the other end of your USB charging cable now. I have to emphasize doMoreTake a spinner screw. It into the other end of your USB charging cable now. I have to emphasize do not overtighten just finger tighten connect it twist it finger tighten to a point.
How do you charge a vision vape?
Simple unscrew your battery from your Clearomizer and clean the battery contact area then screw clockwise into a suitable eGo Charging Lead – but do not over tighten. The eGo Charging Lead has a USB Input which can be put into a PC USB slot or a suitable eGo Mains Wall Charger.
How does a vision spinner work?
0:042:14How to use your vision spinner - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not going to turn on no matter how long how many times turn it back on five clicks one twoMoreIt's not going to turn on no matter how long how many times turn it back on five clicks one two three four five blink blink blink. You're ready to go okay. So we're going to turn it back off.
How do you turn on the vision spinner pen?
As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times.
How do you charge a vape battery?
To charge your battery, simply screw on the USB charger and plug into any compatible charging dock.
Who makes the vision spinner 2?
Central Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back! If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try.
What is a vision spinner 2?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.
How do you use a spinner 3 vape pen?
Vision Spinner 3 S User Manual: The battery is turned on/off by pressing the button five times in two seconds. When the battery is off, the button flashes three times in mixed color to indicate that the battery is activated after pressing the button five times in two seconds.
How do you use a spinner 2 vape?
6:598:31Vision Spinner II Walk Through - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want something a little bit hotter like your tobacco flavors. Turn it up a little bit 4.2 isMoreIf you want something a little bit hotter like your tobacco flavors. Turn it up a little bit 4.2 is generally what the max I'll run it on a 1.8 coil. All righty another thing you want to do too is
Spooky28 Super Member Verified Member ECF Veteran
You got me but I'm happy to commiserate. I just replaced my vision spinner 2 with a MVP v2 because the thing #1 would rarely charge all the way white regardless of the tips I learned here and #2 no matter how much of a charge it was going to orange in 2-4 hours of moderate use maybe once an hour.
Novena Senior Member Verified Member ECF Veteran
How tightly are you screwing it onto the charger? I've found with mine that it's better to not tighten it all the way. I'd also recommend plugging it into a wall adapter rather than your computer - you'll get a better overall charge.
Spooky28 Super Member Verified Member ECF Veteran
The only time I DID get a full charge was using my computer as opposed to wall adapter. Older home who knows what's going on with my house current.
nwohiopma Senior Member Verified Member ECF Veteran
Genuine Spinner 2's are exactly 4-7/8" long. Fakes are slightly shorter.
logic vs emotion Full Member
King, you don't have to turn it off to charge it. So with it on, screw it into the charger, tap the power button once really quickly. When you turn it off, I don't think the pressing the button once with activate the charging. Try it again as I suggested.
xtwosm0kesx Ultra Member Verified Member ECF Veteran
xtwos, I am not sure exactly what firing a tank is can you explain it? And logic when I press it once really fast while its on and connected to the charger it does nothing but do 1 blue blink as if I did a very quick hit, basically like if I took a 0.01 second drag.
How to stop a vape pen from scratching?
The first problem is pretty straight forward, and the solution is to always make sure your vape pen has enough juice in it to avoid that scratchy feeling in your throat. Alternatively, you can check the way you’re drawing and reduce the number of puffs you take in succession. Sipping on some water can also relieve these symptoms.
How to check if a vape pen is working?
To avoid this, just ensure that the heating coil is pulled out to the point where it’s flush with the bottom of the cartridge, which you can do by using the tip of a pocket knife, a razor blade, or paper clip. Thereafter connect it to a charged battery to check if it’s “pulling” properly. Check out this video showing how to pull out the firing pin with the aid of a paper clip. Using this simple method your vape pen should be working A-Okay. A word of caution- please be careful not to cut yourself while doing this.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
Sdh ECF Guru ECF Veteran
When you are charging your vision spinner do you have the voltage on the ecig set at 4.2 volts. If not, try that. Good luck!
Sdh ECF Guru ECF Veteran
Will try this right now and will post again the results. Thanks everyone for trying to help, I'm just so mad. I just got this damn batt and haven't even used it a full month. There should be no reason why my Spinner is just all of a sudden non-working as this battery should last much longer than a month.
rdsok ECF Guru Verified Member ECF Veteran
Make certain to pull the post just to ensure that it is making good contact... The posts are known to get pushed in when a person tightens a carto, clearo or atty on too tight.
jjcordone Super Member Verified Member ECF Veteran
Try gently pulling the post upward with some tweezers. Slide one side of the tweezer under the post top and gently edge it up a bit. Work your way around it doing this. I'll bet it fixes it
Harplayr Vaping Master Verified Member ECF Veteran
Ya but dead after a month... come on! That's a bunch of BS. I hope it does too or I'll prob look for another one with a better warranty or wait for a coupon or something so i don't waste $30 again. I know people have bought this batt before me and theres is still working great.
Adrena ECF Guru ECF Veteran
I didn't say the ticketing system screwed me exactly, I basically said I'm screwed because of the BS answers I'm getting. Why risk a life long customer over a dud $30 battery... unless of course this rice works. Then I won't be ...... cuz I have another eGo style batt and a 510 to keep me going for at least a few days.
