How to vape with a vision spinner?
Begin Vaping. Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.
How to use a vision spinner 2 atomizer?
Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally. We hope we’ve helped you figure it all out.
How do I set the voltage on the vision spinner 2?
Variable Voltage Ring – This part is at the very bottom of the Spinner 2, using the values written around the Spinner, you can set your Voltage to any of the options available by turning this ring. As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly.
What is the difference between vision spinner [ variable voltage ] and VV?
Loading... Vision Spinner [ Variable Voltage ] 1300mAh vape pen battery allows you to change output voltage from 3.3V to 4.8V, Vision Spinner VV [ Variable Voltage ] 1300mAh battery will change your cloud from small to really big.
How do you use a vision spinner vape?
0:042:14How to use your vision spinner - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not going to turn on no matter how long how many times turn it back on five clicks one twoMoreIt's not going to turn on no matter how long how many times turn it back on five clicks one two three four five blink blink blink. You're ready to go okay.
How do I know when my vision spinner is fully charged?
When the battery is fully charged the LED light will turn Green. The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours.
How do you use a spinner 2 vape?
6:598:31Vision Spinner II Walk Through - YouTubeYouTubeStart of suggested clipEnd of suggested clipRun around on the outside of the threads. And again if they're really super gunked-up or reallyMoreRun around on the outside of the threads. And again if they're really super gunked-up or really dirty just a little bit alcohol on it and I should clean it off just fine.
How do I refill my ego T vape?
1:043:03How To Vape - Filling Your Ego CE4 Clearomizer With E Liquid - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn this tank just not in that one center hole that's your only thing that you have to do is avoidMoreIn this tank just not in that one center hole that's your only thing that you have to do is avoid spilling or dripping any liquid into that tiny tiny center hole right there.
Why does my vape blink 3 times?
Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
Can I charge my vape with a phone charger?
It's always best to use the same cable that came with your device to charge your vape. Most phone chargers are fine, however some phone chargers where the cable cannot be removed from the charger are designed specifically for the product they came with.
How do you charge a vision spinner 1?
0:141:06How to charge a vision spinner battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. ItMoreInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. It into the other end of your USB charging cable now.
What is a vision spinner?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.
How do I charge my EVOD twist without charger?
4:105:05How to charge any E cig without a charger - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as thatMoreSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as that and that was off so now it's on. It was off before so that's how you know it was charging.
How do you change the liquid in a vape pen?
It is easy to change vape juice just by switching the wick. If you are vaping with pre-built coils you have two options when changing e-liquids. You can put in your new juice and let the new flavor mingle with the old. The new flavor will be prominent but you will taste traces of the old flavor.
How do I fill my ego ce4 tank?
0:263:19How to Fill Your CE4 Tank? - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that being said go ahead and grab the tank do not grab the battery if you've got the batteriesMoreSo that being said go ahead and grab the tank do not grab the battery if you've got the batteries you'll see your tangle back off. So grab the tank a couple screws here pop that out alright.
What does it mean when my vape blinks 15 times?
If your battery flashes 15 times, it means your e-cig is being over-used and that you should take a break. If your battery flashes 30 times, it needs to be recharged. If your battery flashes continually, it's an indication of a problem with the battery's performance. To fix the issue, try cleaning the battery first.
What voltage is needed for a Spinner II battery?
The Spinner II Battery requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as iPhone chargers, will damage the battery.
Can you use a non standard charger on a Spinner II?
Any use of non- standard chargers, especially with higher output such as iPhone chargers, will damage the battery. Usage of non-standard chargers on Spinner II is strictly is dangerous and immediately invalidates the warranty.
How to tell how much battery is left on Vision Spinner?
The LED battery indicator lets you know how much battery is left on your Vision Spinner Vape Pen. The light is white when it has over 60% charge.
What is Vision Spinner?
The new Vision Spinner is a variable voltage vape mod and features a large 1600mah battery and is not much wider than your standard eGo-t. In addition, the Spinner 2 has a more comfortable feel and not to mention a stylish new look, equipped with a matching Kanger Clearomizer.
How long does it take for Vision Spinner to charge?
Charging time is 2-3 hours. Vaping at a higher voltage will drain the battery faster.
How long does it take for an atomizer to lock?
Atomizer Protection: If you press the button for 8 seconds, the battery will lock itself until you press the button again. Low Voltage Protection: When the battery voltage drops to below 3.3 volts, the battery will shut down to protect your device.
Awesome
It was an great experience and I will definitely order from y'all again. Thank you for such a great experience
It works for me
Like the bigger battery size it stays charged much longer. Just wish they would come with the charger. But all in all I like it. "It gets"
Good batteries with multiple thread
Good batteries with multiple thread types. Supports several types of devices.
Available Options
Vision Spinner [ Variable Voltage ] 1300mAh vape pen battery allows you to change output voltage from 3.3V to 4.8V, Vision Spinner VV [ Variable Voltage ] 1300mAh battery will change your cloud from small to really big.
Vision Batt Included
I’m glad I took the time to Google the name on the pen and found the this site carrying them, these batteries are AMAZING!!!
Vision Spinner 3 Battery
The strongest version in the spinner version. -Spinner 1 Simple and practical quality -Spinner 2 Simple and practical quality, increased endurance -Spinner 3 Simple and practical quality. 1600mah ( power ) /1000mah (smart in size ). Updated the more stable V chip.
Vision Spinner 3 Battery
The strongest version in the spinner version. -Spinner 1 Simple and practical quality -Spinner 2 Simple and practical quality, increased endurance -Spinner 3 Simple and practical quality. 1600mah ( power ) /1000mah (smart in size ). Updated the more stable V chip.
Our Service
1. From raw materials to finished products, every process is tested and controlled professionally and strictly by our professional machines and personnel. 2. Our products are approved CE, RoHS certificate. 3. Except for the Standard components, if you have special request for the components, we will customize it for you.
Vision Spinner 3 S
Check out the NEW Spinner 3 S vape pen battery featuring an all-new design and upgraded built-in battery with adjustable power.
VISION SPINNER 3S Features
Built-in 1600mAh Battery 510 Connection Upgraded Circuit Board Upgraded Battery 5-click on/off Button Variable Voltage Dial Output Voltage Range: 3.6V-4.8V Micro-USB Charging Port