Full Answer
How to vape with a vision spinner?
· Shortly after I posted this last night I got the 14 flashes that told me it needed to be recharged. Cleaned up the battery post area, put it on the charger, let it rest after and now it's working just like normal. I'll keep a close watch on it to …
Why is my vape blinking and blinking?
· My Spinner only flashes when I hit the timed cutoff. BobbyQ has a good suggestion, try recharging the battery. It is possible that the battery has been drained and it may need recharged. Also crxess below has some very good pointers. SirSteve, Sep 15, 2013 #6 crxess Grumpy Ole Man Verified Member ECF Veteran Sep 20, 2012 Williamsport Md
How do I know when the vision spinner is charging?
9 years ago. Problem with my Vision Spinner. Light flashing. So I've ordered a Vision Spinner 1300 mAh to use with my stock Vision eGo cartomizer, that came with a starter kit. What happened was that the light started flashing a few times and it wouldn't fire. I ordered two, as both me and my girlfriend vape and she has the exact same carto.
How do I turn the vision spinner on and off?
· The most common reason that a vape pen blinks will be discussed below as well as some of the top issues for resolving these warnings. Reason 1: Loose Battery Errors If your battery connection is not sufficient it's possible that you could be receiving a flashing light quite quickly after you turn your device on.
Why does my vision spinner keep blinking?
The button flashes fifteen times in mixed colour to indicate that there is no power left in battery and it can no longer function without being properly charged. Under normal operating conditions and to prolong the life of the battery only charge the battery when it is out of charge.
Why is my vape flashing when I hit it?
This is often caused by a loose battery. If the battery is not screwed in properly, it won't be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.
How long does a vision spinner 2 battery last?
Rechargeable Battery The Vision 2 Spinner charging at full battery life, should last 14-16 hours of full flavor vaping. It's highest usage levels yield well over 10 hours of battery life, a significant advantage over most competing models.
How do you preheat the vision spinner 2?
As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
Why does vape blink 10 times?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
Can you overcharge a vape?
Excessively overcharging your vape throughout the night will damage the batteries. A full charge that continues to overcharge can break the battery and cause it to explode.
How do you use a vision spinner vape pen?
0:318:31Vision Spinner II Walk Through - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to go to where the battery stops let it stop. You might want it you might just snug it up aMoreYou want to go to where the battery stops let it stop. You might want it you might just snug it up a little bit just to keep it from wobbling at all and no more reason being is that if you.
How do you charge a spinner vape pen?
0:061:06How to charge a vision spinner battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. ItMoreInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. It into the other end of your USB charging cable now.
How do you know when vision spinner 2 is fully charged?
When charging your Vision Spinner II, the V will light up orange, and the light on your charge cable will turn red. After some time has passed, the V will turn to blue, then it will turn to white. When the V is white and the red light on your charger turns green, the battery is fully charged!
How does a vision spinner work?
0:042:14How to use your vision spinner - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not going to turn on no matter how long how many times turn it back on five clicks one twoMoreIt's not going to turn on no matter how long how many times turn it back on five clicks one two three four five blink blink blink. You're ready to go okay. So we're going to turn it back off.
Who makes the vision spinner 2?
Central VaporsCentral Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back! If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try.
Why is my vape flashing 3 times and not working?
Battery LED flashes 3 times Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
How do you fix a vape that won't smoke?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
How do you fix a disposable vape that won't hit?
Sometimes, a disposable's failure to hit is simply due to an air bubble in the cartridge that's preventing airflow. If this is the case, try tapping or flicking the side of the cartridge a few times, as this should break it up.
What does it mean when a vape blinks 3 times?
a short circuitIt's common for some vape pen batteries to stop working because of a short circuit, and this is usually indicated with the light blinking 3 times. It can also mean there is a chance there is not a good connection being established with the vape cartridge and battery.
Why is my vape pen blinking?
If you have a blinking display light on your vape pen, it's also possible that you might have components which are incompatible with your device. Many vape devices will provide you with an alert when there is a replacement coil that is been installed with too low a resistance level.
What to do if you see warning lights on a vaporizer?
If you see that you have several warning lights stop using your vaporizer as soon as possible and start checking for the issue before you keep using it. There's likely a checklist in your user's manual that is specific to your model.
Why do vapes flash?
The flashing lights that are found on your vape are designed to quickly catch your attention when there's a problem and to make sure that you can address the problem quickly. Reading in your owners manual can be one of the easiest ways that you can discover what's going on and get your vape working again.
What is the main body of a vape?
The device also comes with a number of protections and hardware safety features that can prevent failures or breakdowns in your vape. The main body is produced using zinc alloy with ABS and PC materials. The system also has a fairly strong weight for robust use but a discreet design.
What color is battery indicator meter?
The battery charge indicator meter comes with illuminated lights which also display error messages. The colors on the monitor will start at white with full charge, moved to blue at half charge and then turn to orange at 30% charge. The lights will flash when the device receives a warning.
Is the Spinner 2 a good mod?
The spinner 2 is stylish and extremely comfortable and is designed to outperform any other variable voltage battery on the market. This is definitely a high-performance mod and it improves any 510 battery offering an extended lifespan to any vape.
Does the stainless steel vape have a texture?
As you adjust to higher voltage ratios, you can expect much higher volumes of paper. The stainless steel body sits flush with the bottom of the device and it also has a texture on it to allow for an easy grip. The battery is a beautiful extension to any vape with the chromed brass look and the improvements it can make.
How to turn on a vision spinner?
How To Turn On The Vision Spinner. As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times. This method allows for the Battery to output a higher temperature ...
How to unlock Vision Spinner 2 battery?
To lock or unlock the Vision Spinner 2 battery, press the button 5 times within 1.5 seconds. The LED light will flash to confirm each action. When the battery is in lock mode, the power button is disabled. Charging time – Spinner II, for its large capacity of 1600mA, requires about 5-6 hours to be fully recharged if the the battery has no power at all. Spinner II, no different to regular eGo batteries, requires a standard USB charger of 420mA output and a wall adapter of 500mA output.
What is a vision spinner 2?
What is the Vision Spinner 2? The Vision Spinner 2 is a variable voltage battery, that is adjusted by spinning the base at the bottom of the battery. Threading Connection – This part is found at the top of the battery, it’s the threading that will connect to the threading of the Atomizer.
How long does it take for a vision spinner to charge?
Like other e-cigarette batteries, you should always give your Vision Spinner an initial charge of at least 4 hours, even if it appears fully charged or is already holding some charge. This conditions the battery and ensures a longer battery life overall. Once the battery is conditioned, you will typically need to charge a low battery for three to four hours.
Where is the power button on Vision Spinner 2?
Power Button – Found on the face of the Vision Spinner 2, it’s used to turn the Spinner on and off. Variable Voltage Ring – This part is at the very bottom of the Spinner 2, using the values written around the Spinner, you can set your Voltage to any of the options available by turning this ring.
Does the 510 thread work on a 510 battery?
Hey Jill, yes it has 510 threading and allows this battery to be compatible with most other 510 threaded attachments.
What are the OLED indicators on a vape?
Thanks to the lean design of most vape mods, vaporizer manufacturers use OLED indicators to send a variety of signals to the user. Oftentimes these warnings come in the form of blinking lights of different colors.
Why is my vape not charging?
Reason #1: A Loose Battery. Sometimes, the battery connection in your vape isn’t sufficient. This is often caused by a loose battery. If the battery is not screwed in properly, it won’t be able to fully charge and the indicator light will continue to blink.
Why does the Penguin SE special edition blink?
The Penguin SE Special Edition has an indicator light that will blink to communicate low battery life, like many other vape devices. Try charging your device to see if that resolves the issue.
What does the battery indicator light on a Pico 75W do?
The iStick Pico 75W Starter Kit from Eleaf has a battery indicator light that will blink when the battery reaches a power level of 10 percent or less. If your indicator light is blinking, your first option is to attempt to recharge the device and see if that resolves the issue.
Why does my Air 2 flash red?
The Air 2 uses red flashing lights to show you that your battery has been discharged and needs immediate attention. It will also blink rapidly if it detects a short circuit condition.
Why does the battery indicator on my Rebel 3 flash?
The indicator also flashes if you hold the firing button down for too long, putting your device at risk of overheating.
Why is my display light blinking?
One of the most common reasons for a blinking display light is luckily also one of the easiest to resolve. It is possible that the activation button (the button you press to activate the device) is simply stuck in a slightly pushed-in position.