Full Answer
Why do my vape coils burn?
Without liquid to vaporize, the coils start burning the wick, and the user essentially inhales burnt cotton. Here are some of the most common reasons behind burnt hits and some advice to help you avoid them.
How do you know when to throw away a vape coil?
After a nasty burnt hit, your coil is probably ready to be binned. If you managed to catch it early, you can still give it a go and see if the burnt taste disappears after a couple of puffs. Unfortunately, chances are you’ve already burnt some of the cotton inside the coil, and it will need to be replaced.
Why is my vape burning through coils so fast?
Sub-ohm coils heat up much quicker than those with a higher resistance. If your e-liquid has a thinner consistency then the atomizer head can vaporize it too quickly, causing premature burning.
Why does my vape taste burnt even with a new coil?
That burnt taste can occur if there's not enough e-liquid on the wick inside your atomizer coil. The wick is the part of your device that soaks up the e-liquid, which is then turned into vapour when the coil heats up.
How do I stop my vape coil from burning?
The best ways to stop your coil from burning are:Prime your coils.Stop chain vaping.Reduce power settings.Keep your vape tank topped up.Use a vape juice with more PG.Try a vape juice with less sweetener.Use temperature control.Use smart mode.More items...
How long should vape coils sit?
around 5-10 minutesIt's always recommended to leave your coil to prime for as long as possible - anywhere between 5-30 minutes. The longer you leave it the better, but most coils should be ready to vape after around 5-10 minutes.
Why is my coil burning after 1 day?
Ensure Your Tank Is Properly Filled While this might seem obvious, the first port of call when your coil is burning is to ensure that it is properly saturated with e-liquid. Allowing your tank to run on empty while still vaping will inevitably cause dry burn, which can permanently damage the coil.
Can you wash a vape coil and reuse it?
Replaceable coil heads that come with sub ohm tanks and clearomizers can technically be cleaned, but it won't completely revive them. Best case scenario, you get an extra few days out of a tired coil head. The reason behind that is the presence of wicks.
How do you break in a new coil?
Here is how to make coils last longer by breaking them in gradually:When you start vaping, set the wattage to the lowest recommended setting.Take a few short vapes to slowly start to break in the coil.Increase the power by 5 watts.Take three normal vapes and increase power by 5 watts.More items...•
What happens if you forget to prime your coil?
Never Forget to Prime Priming is easy to do, but absolutely crucial to remember when you install a new coil. If you don't do it, you'll end up with dry hits, burned wicks and money tossed down the drain.
Hang On, How Do You Tell If Your Coil Is Burnt out?
If your coil is truly burnt out, you will know about it – the taste of Meche Brûlée is truly unmistakable!If your coil is only slightly burnt, you...
So How Can We Stop Our Coils from Burning out?
Well, from the above, it’s clear that the key thing we need to ensure is that there’s always juice in the wick when we vape.This means you shouldn’...
7 Ways to Stop Your Coil from Burning
If you don’t “prime” your coils before you start vaping, you can burn your coil before you’ve even gotten any use of out of it.When you first insta...
Saving Your Money and Your Tastebuds
Although it seems like a lot of things to keep track of, this is definitely an area where it’s worth going to some effort to protect your coils. Ev...
Why does my vape coil burn out?
6 Common Reasons Why Vape Coils Burn Out – and How to Avoid It! 1. Not Enough Vape Juice in the Tank. Whenever your wick is dry, it will not function properly. As mentioned, the wick needs to be saturated in vape juice. In case you vape frequently, then your tank will start to run empty and the wick will not soak up as much ...
How to avoid burnt coils in vape?
To avoid the burnt coil, keep checking your tank and top it up when it is at a third of its capacity. 2. Chain Vaping.
What happens when you vape with a wick?
This wick surrounds the element which usually heats up the moment current passes through it, causing the vape juice to evaporate. Once evaporation occurs, the vaper can inhale the vapor that’s produced. However, if the wick wasn’t primed properly before you took your first puff, you’ll experience a burnt taste.
What happens if you use a coil that isn't high grade?
If you do so with a coil that isn’t high-grade, the wick won’t be able to handle the heat these wattages will generate and will end up burning. The solution to this is to simply reduce your power setting and find out the ideal wattage you should vape at.
What happens when you vape multiple puffs?
This causes the wick to burn.
Why is it important to take care of your coil?
While preventing your from burning out seems like a lot of work, it’s worth it because it helps you avoid losses. It also saves you the trouble of experiencing an irritating burnt taste. Taking care of your coil could mean the difference between an enjoyable vaping experience or a terrible one.
Can you use a lot of sweetener in vape juice?
Using a Vape Juice with a Lot of Sweeteners. Vape juices that contain a lot of sweeteners can cause gunking up of coils. While they may be delicious, they could significantly destroy your coils. When gunking happens, the wick will be unable to soak up more juice so when you vape, the coil could get burnt.
How to stop coils from burning?
The best ways to stop your coil from burning are: 1 Prime your coils 2 Stop chain vaping 3 Reduce power settings 4 Keep your vape tank topped up 5 Use an e-liquid with more PG 6 Try an e-liquid with less sweetener 7 Use temperature control 8 Use smart mode 9 Use auto-priming technology
Why does my coil taste burnt?
Given that we know that burnt coils can produce harmful chemicals , you should probably still change it. Occasionally, you’ll also get a burnt taste when you have just replaced a burnt out coil.
Why is my coil head not soaking up?
On many coil heads, the juice has to be at a certain level to even reach the wicking ports. When less of the juice is in contact with the wick, it doesn’t get soaked up as quickly. When your juice level is really low, this can cause problems very easily. The simplest solution to this is to keep your tank topped up.
How does a fire button work?
When you hit the fire button, electricity flows through your coil and it gets hot. The heat given off by the coil is taken up by the e-juice, which is soaked into the wick, and it turns the juice into vapour.
What is TC vaping?
Temperature control (TC) vaping solves the problems with burning wicks more directly. By tracking the detectable changes in resistance that occur when certain coil materials are heated up, TC devices such as the Geekvape Aegis Max Zeus allow you to set a maximum temperature for your coil.
What happens when you vaporize a wick?
When the juice in the wick has been vaporised, the wick dries out a little. However, you have a tank full of e-juice surrounding the coil, and this is constantly replacing the juice in the wick. This means that by the time you go to take another puff, the wick is soaked again and everything works as it should.
How long after filling up a vape tank should I wait?
Now your new coil is ready to go. But, as an extra precaution, it’s still better to wait about five minutes after you fill up your tank before you start vaping.
Can sweeteners shorten the life of a vape coil?
While added sweeteners can do wonders for replicating the flavour of our favourite fruits and baked goods, they do noticeably shorten the life of your coil, especially in larger quantities. As you vape, the sweetener in the e-liquid may leave residue on the coil.
Do coils last longer?
However, there are some ways to avoid dry hits for good and make your co ils last longer.
Does e-liquid have sweetener?
Many e-liquids even contain no sweetener to extend coil lifespan. The best way to find an e-liquid with low sweetener is to ask for advice at your local vape store, or online communities of vapers, who are always happy to help beginners.
How to know when your coil is done?
Knowing when your coil is done is not a science, but it is a learning process. The more you use a vape tank, the more aware you become of the time you need to grab a new coil out of the box. The first sign will usually be a loss of flavor, followed by a drop in vapor production.
How to keep vape wick from drying up?
Always stay inside the recommended wattage ranges. Chain vaping. When taking many puffs in a row, the wick will dry up fast. If you sense that a burnt hit is coming, by noticing a slightly roasted taste, put your vape down for a moment. This will allow liquid to cover the dry spots of the wick.
How long does a coil last?
Consumption. A coil is generally good for up to a certain amount of e-juice. The more you use it, the faster it dies. Coil life is sometimes calculated in days or weeks, but the most accurate way to calculate it is in mL—some people vape only a couple of mL per day, while others will consume 10-20 mL or more.
How to start vaping on a pod?
When you first begin vaping on a pod, try and take shorter puffs to begin with. Some of the smaller coils need to be broken in a bit before being pushed. If you take really long hits to start, even if the wick is fully saturated, you could get a burnt hit.
How to prime a vape tank?
How to prime vape tank coils. All vape tanks that come with replaceable coil heads have more or less the same structure and require the same simple steps to get primed. You will need to repeat this process every time you replace a coil. Take a new coil out of the box.
Why does my e-liquid burn?
Here are some of the most common reasons behind burnt hits and some advice to help you avoid them. High wattages. Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast. When that happens, the coils can burn the wicks, even when there’s still some juice there.
What to do if your coil is burnt?
Don’t be discouraged. Vaping is an enjoyable safer alternative to smoking. If your current coil tastes burnt, grab a new one and discard the bad one. Just don’t forget to prime it first!
Why do vape coils have cotton?
Most vape coils are made with cotton because it's perfect for soaking up e-juice and holds it really well while still allowing air to be drawn through. However, if you haven't vaped for a while or you're just switching to a new liquid or coil, the cotton can be extremely dry. By soaking the wick in e-juice before you start vaping, you'll eliminate any risk of that dreaded 'dry hit' This is as true for those using traditional cartomizers as it is for those with newer mods. The trick is let your e-juice sit in the tank for a good 5-10 minutes at least before you take your first hit.
How does high wattage vape work?
High wattages allow you to burn through e-juice at twice the speed. It may offer bigger and better clouds, but at the cost of longevity - your vape sessions won't last as long. Once the e-juice runs out the wick will dry and result in a dry hit. It may not be popular with the cloud chasers, but if you want a longer vape sesh and want to cut down the risk of burning your vape coil, turning down the wattage is the way to.
Why is it important to use high VG juice?
This is particularly important when using a high VG juice because it takes these longer to soak into your coil in between each drag.
Can you mix PG and VG in e-juice?
Typically, you'll see a mixture of PG and VG in any kind of e-juice. The higher the VG content, the thicker the liquid and the longer it takes to soak the coil between draws. That means that if you like vaping quickly you might burn out your coil quicker with a high VG liquid.