What is TC in vape mods and how does it work?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).
What should I expect from a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
What does TCR mean on a vape device?
The TCR mode in vape devices assigns a value that depends on the best temperature for each coil type. This mode allows you to get the best results from your vape and coil combined. TCR doesn’t actually tell you about the coil temperature. Instead, the value is more about the relationship between heat and resistance.
What type of wire does TCTC vape use?
TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L.
What temperature do you vape TC?
390°F to 480°FNow that your device is on the ready, let's talk about one of the most confusing factors involved in TC vaping — choosing the right temperature to vape at. The best-recommended temperature to vape at ranges from 390°F to 480°F (200°C to 250°C), but it all comes down to personal preference.
What setting should my vape be on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What does TC TCR mean?
TCR is an acronym that stands for Temperature Coefficient of Resistance – which probably doesn't make the subject any clearer. Although this may sound complicated, it boils down to a relatively straightforward function.
What does TC NI mean?
First Time Temperature Control Setup: Depending on your vaporizer, it may have a single TC Vape Mode that supports both Nickel (Ni) and Titanium (Ti) coils, or it may have a specific Temperature Control Mode that must be set to support either Nickel (Ni) or Titanium (Ti) coils individually.
How do you use vape TC mode?
How to vape in TC. Put your mod into TC mode and select the corresponding wire type for the coils you have. If the mod has a TCR you can enter the exact TCR value. After that, ensure that your mod and tank are both at room temperature so the temperature readings will be more accurate.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What wattage should I vape at 0.2 ohm?
0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
How Does Temperature Control Vaping Work?
The purpose of TC vaping is to limit the temperature of the coil in your vape tank, thus minimizing the chance of a burnt wick or dry hit. When you use temperature control mode, you define the maximum temperature that your coil should be allowed to reach. Your mod then monitors the coil temperature as you vape.
What Happens When You Put Your Mod in Temperature Control Mode?
When you put your mod in TC mode, you’ll need to configure two things: the maximum temperature that the coil will be allowed to reach and the “preheating wattage,” which basically determines how quickly the coil will reach that temperature.
What Equipment Do You Need for TC Vaping?
To vape in TC mode, you need two things. The first item – as you probably already guessed – is a vape mod that supports temperature control vaping. As we mentioned above, temperature control is a feature that’s implemented in firmware.
What Are the Pros and Cons of Temperature Control Vaping?
Let’s talk now about the experience of using a TC vape mod in temperature control mode. TC vaping definitely has its benefits, and there are definitely plenty of people who prefer temperature control over wattage-based vaping.
Why do you need TC vape?
The major benefit of TC vaping is that it stops your coil from running too hot. This in turn ensures your coils last longer as they won’t burn out prematurely, while also making sure your RDA/tank avoids any damage. Keeping your coils in good condition also means that you can maximise their lifespan , for a more cost-effective experience overall.
Do you need TC mode for Kanthal?
You’ll need a kit or mod programmed with TC mode in order to experience Temperature control vaping. As well, you’ll also need compatible coils. The majority of vape coils use Kanthal in their construction, Kanthal does not work with TC mode as its resistance does not change when it heats up.
What does TCR mean in vaping?
Putting it simply, TCR denotes a number that identifies how the resistance of a material changes as the temperature fluctuates. When talking about vaping devices, the TCR refers to how the coil’s (material) resistance changes as the heat increases/decreases.
What is TCR mode?
To put it simply, the TCR mode allows you to adjust your mod to be as precise as possible, especially with the coils and materials that weren’t manufactured to work with your factory set mod. So, if you are experimenting with unique coils, use the TCR mode for safety purposes.
Why is TCR important?
Importance of TCR Mode. It is a known fact that not all materials (coil) respond the same when there is an increase in temperature. The type of alloy in coils is responsible for establishing the connection between resistance and potential heat.
Do you need to know TCR?
There is no need for you to know TCR values and understand the workings of the TCR mode if you intend to vape with pre-packaged coils and mods created from the same brand.
What is TCR mode in vape?
Vape TCR mode has to do with the specific resistance and heat that corresponds to a particular type of alloy (metal) that’s used in an atomizer coil. In simplest terms, less resistance equals more heat at a faster rate. Depending on the alloy used to make the coil, the relationship between the potential heat and resistance level will change.
What does TCR stand for?
TCR is an acronym that stands for Temperature Coefficient of Resistance – which probably doesn’t make the subject any clearer. Although this may sound complicated, it boils down to a relatively straightforward function.
Why use different TCR values?
As a result, different TCR values are used to label different types of coils, to help your device determine the best temperature for vaping with that specific alloy. This feature ensures that you (and your vape mod) are safe.
Can you use TCR mode on a coil?
If you’re using a device that already has default settings for the coils you’re pairing it with, you won’t need to worry about TCR mode. However, the special feature does come into play when you want to use coils that may not be inherently compatible with your current device.
How does TC work?
AB, Canada. TC works because a coil's resistance changes with its temperature. However, different metals change at different rates. The TCR (I'm not sure what it stands for - temperature coefficient of resistance?) is a value that your mod can use to calculate the coil's temperature from its resistance - or rather from the difference between its ...
What metals are used in TC?
Titanium (Ti), nickel 200 (Ni) and stainless steel 316L (SS) were the first three metals used for TC, although SS316L has pretty much eclipsed the other two by now. Your mod is programmed with TCR settings for those three. You said there was also a TC setting.
Can you use Kanthal in TC mode?
Some materials have to be used in TC mode, such as Titanium and Nickle otherwise bad byproducts can enter your vape as they overheat. Kanthal can only be used in wattage mode (for the most part a few mods claim to be able to do TC with it) and SS can be used in wattage or TC mode.
What does TCR stand for in vapes?
What is Vape TCR Mode? Vape TCR stands for Temperature Coefficient of Resistance. Wellon Vape experts told Olivia that it’s basically a number that describes how the resistance of metal in our coils changes as it changes temperature.
Does temperature control work on vaping?
Temperature control in vaping devices doesn’t actually measure the heat of the coils, but how easily electricity passes through the metal. That’s why when coils go dry and get warmer, the TC controls kick in.
What does variable vaping mean?
Variable vaping can mean variable wattage, variable temperature, and other technical mumbo jumbo. But perhaps one of the more enigmatic terms you’ve most likely encountered is TCR. We see it as one of the main features of a mod, or you’ve probably seen the term in your mod’s manual. While we appreciate the extra feature, ...
What are the different types of stainless steel coils?
There are different types of Stainless Steel coils, such 302, 316L, 430, etc. The same goes with Titanium and Nickel, and each variation or each material have different reactions to temperature changes.
Is TCR complicated?
TCR may seem complicated, but it need not be. While you can research and learn about all the technical data, what they mean, and how it affects your vape, this can be too much for casual users.
