SS can be used in wattage or temperature control mode. Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. Titanium Grade 1: otherwise known as Ti.
What are wattage mode and SS mode used for?
With the exception of stainless steel, which can be used in wattage mode and SS mode, they should only be used in those mods that correspond to them. They allow you to limit the temperature you vape at.
How does a vape mod work?
The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature. Think of it as a car traveling in cruise control. To maintain a speed, more power is needed to go up a hill than down a hill… but the speed would stay the same. First and foremost, a vape mod that supports TC.
What's the difference between SS and TC?
But there is also a TC mode. What is that? The SS/Ni/Ti are preset materials, the TC mode presumably lets you enter your own TCR. With SS you usually have to do that because there's not 1 TCR that applies to all SS (range from about 88 to 115).
What should I expect from a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
What does SS mean on a vape?
Stainless Steel Mode (SS Mode) Stainless Steel Mode (or SS Mode) was created for use with stainless steel wire. Stainless steel is arguably the most versatile of coiling materials, as its heating properties allow it to be compatible with Power Mode and SS Temperature Control Mode.
What is NI TI and SS?
Stainless steel (SS), nickel (NI), and TI (titanium) are all wire materials. With the exception of stainless steel, which can be used in wattage mode and SS mode, they should only be used in those mods that correspond to them. They allow you to limit the temperature you vape at.
What's the best setting for my vape?
Low-temperature vaping is the top recommendation for vape pens. It has a better flavor and it's safer, having less impact on your lungs. Low-temp vaping is usually set at 374℉. This setting produces a thinner vapor than higher temperatures.
What is SP mode on a vape?
SP (Super Player) Mode In SP mode, it has broader resistance range from 0.03Ω-5Ω which is adaptive to mainstream RDA tanks.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
How do you cure Vapers tongue?
Change the flavour - the simplest solution; swap your vape juice every so often. By simply changing the flavour you vape and returning to it after a couple of weeks, can help fend off vaper's tongue and keep the taste fresh.
What are the different vape modes?
What Are the Different Vaping Modes and What Do They Mean?Variable Wattage and Variable Voltage Mode. When you turn a vape mod on for the first time, it'll probably start in variable wattage mode. ... Temperature Control Mode. ... Wattage Curve Mode. ... Bypass Mode. ... Smart Vaping Mode.
What is TI and NI?
The Difference. The reason the two get confused so often is because, one: they are both introverted functions which makes them hard to see and distinguish, and two: they are both abstract. Ni collects and stores abstract information, while Ti makes abstract connections and conclusions.
Is NI better than TI?
Ti and Ni are almost opposites. Hell, they aren't even same-type functions. Ti is a judging function.. it's used for making decissions based on information gathered by another function. Ni is a perceiving function, meaning it's actually in charge of gathering information for another function to make decissions.
How does Ni and Ti work together?
The Ni-Ti loop occurs when an INFJ focuses primarily on their dominant intuition and tertiary thinking functions. When the INFJ retreats from the outer world and stops interacting with people or objects around them, they can get stuck in a loop and become uncharacteristically cold and withdrawn.
Can you vape SS in wattage mode?
SS can be used in wattage or temperature control mode.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
Do stainless steel tanks come with coils?
While stainless steel is still popular, the majority of tanks don’t come with TC-ready coils. If you want to vape in TC, and you are not interested in building your own coils, truth is that your choices are limited.
Asmani Senior Member
In the temperature mode of Vaporesso box, there are SS, Ni and Ti options, which I assume they should be used in accordance with the material of the coil. But there is also a TC mode. What is that?
untar Vaping Master
The SS/Ni/Ti are preset materials, the TC mode presumably lets you enter your own TCR. With SS you usually have to do that because there's not 1 TCR that applies to all SS (range from about 88 to 115).
Hawise Ultra Member ECF Veteran
TC works because a coil's resistance changes with its temperature. However, different metals change at different rates.
stols001 Moved On ECF Veteran
You've gotten good answers, and hopefully they help. If you are struggling with settings and whatnot, I usually find a good YouTube review or two to be far more helpful when it comes to actually figuring out mod settings and etc. It's more helpful (to me) than a thousand user manuals.
BrotherBob ECF Guru ECF Veteran
In the temperature mode of Vaporesso box, there are SS, Ni and Ti options, which I assume they should be used in accordance with the material of the coil. But there is also a TC mode. What is that?