Full Answer
What do the lights on my vape pen mean?
1 When you are vaping, it indicates a full or near full battery power. (at least 70%) 2 When you are charging, it indicates charge completed. 3 When you pressing power button 3 times continuously, the indicator light blinking green it indicates that the vape pen switches to high mode power output.
Why won’t my vape pen vape?
The problem could also be due to residue building up on the heating coil in which case you may need to clean it. You can do this by dubbing it with a cotton bud dipped in isopropyl alcohol, and you’re good to go. Even with the battery fully charged, your vape pen may still fail to produce vapor.
How many times does the LED light flash when vaping?
1. 8 seconds protection: the white LED light will flash 5 times when vaping for longer than 8 seconds, and the battery will automatically shut down the output. Low voltage protection: when battery capacity is lower than 3.3V, the LED light will flash 15 times and the battery will automatically shut down the output.
When to read the product manual of a vape pen?
When you meet any situation above, usually we suggest you to read the product manual at first. Also in this article we list 7 questions you are most likely to ask when your vape pen is blinking, with detailed answers. Why is my vape pen blinking 3 times and go out? Vaping over 8 seconds at one time, the vape pen will automatically shut off.
Why does my Dab pen blink 20 times when I plug it in?
1. YOUR OOZE VAPE PEN IS DEAD AND NEEDS TO BE CHARGED. One of the most common reasons your Ooze pen is blinking green is because the battery has died and needs to be charged. When your Ooze vapor battery is dead, it will typically flash green 10-15 times.
What does it mean when your vape pen lights up white?
Blinking White? Check the Vape Pen Connection. When your battery is blinking white, that generally indicates that your battery is not fully connected. A loose battery can disrupt the flow of electricity, preventing your vape from fully charging.
Why is my DAB pen blinking white 15 times?
If your battery flashes 15 times, it means your e-cig is being over-used and that you should take a break. If your battery flashes 30 times, it needs to be recharged. If your battery flashes continually, it's an indication of a problem with the battery's performance.
Why is my pen blinking when I plug it in?
This is often caused by a loose battery. If the battery is not screwed in properly, it won't be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.
Why is my battery blinking white 3 times?
Battery LED flashes 3 times Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
Why is my vape flashing 10 times?
Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
How do you fix a blinking vape pen?
How to Fix a Blinking Vape PenCharge the Battery: Simply plugging it in to charge the battery might stop the blinking in just a moment.Replace or Refill the Cartridge: If a lack of e-liquid was the problem, replacing or refilling your cartridge should do the trick.
Why is my vape pen not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
What does white mean on a cart battery?
When the battery is having a connection issue the battery will blink a mix of red, green, and white 4-5 times. These colors indicate the charge: Green = Full Charge. White = 50% Red = Needs Charge.
What do the colors on my vape pen mean?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
Why is my Airis blinking white?
What does it mean when the lights blink white? White blinking lights usually mean that the battery charge is almost completely out and should be recharged.
What does it Mean when your Vape Pen Blinks
Vape Pens will blink for a variety of reasons from dead batteries and severed connections, to a coil needing to be connected, replaced and so much more. And there is no universal blinking formula that you can look at to find out what is happening when a vaporizer starts blinking this or that color, this or that many times.
Vape Pen Blinking 3 Times
A wide variety of vape pen lights will blink 3 times. There are a few possible reasons for which this can occur. Sometimes the light will blink 3 times after the after turning the vape power on or right before shutting it down.
Vape Pen Blinking 10 Times
If a vape pen is blinking 10 times it is very likely that the PCB chip, aka the brain of the vape is telling you that the battery is dead. Eventually there will not be enough power to even see this sequence of blinking, but if you happen to come across the 10 blinks, it is time to get a new vape.
Vape Pen Blinking Guide – Find your Vape Pen Below
Is a vape pen blinking 3 times, 4 or maybe even 10 times? Vaporizers can’t talk to us, so engineers have designed the chips that operate them to communicate with us via blinking lights. With all of the different vaporizers in the market, there is no universal blinking light language.
Why is my Vape Pen Blinking Blue or Other colors
If your Vape Pen is blinking a certain color when you try to operate it, the number of blinks is what you want to pay attention to and you can reference the user manual or use our Vape Blinking Guide above to find your vape. The number of blinks can mean a variety of things, including issues with a battery, coil or something else.
Vape Pen Light Meaning
As we said above, the exact meaning of the light color and blinking sequence will vary from vape to vape. It is always best to consult the user manual to know exactly what is going on with the vape. A good rule of thumb is that the light color is likely an indicator for heat or voltage setting.
Why does my Vape Pen Blink when Charging
Ultimately it depends on the vaporizer in question so you should always consult the user manual first. If the vape is continuously blinking when it is placed on the charger, then it is likely that the vape blinks to show that it is charging. And when completely charged, that blinking usually stops or stays constant.
What are the OLED indicators on a vape?
Thanks to the lean design of most vape mods, vaporizer manufacturers use OLED indicators to send a variety of signals to the user. Oftentimes these warnings come in the form of blinking lights of different colors.
Why is my vape not charging?
Reason #1: A Loose Battery. Sometimes, the battery connection in your vape isn’t sufficient. This is often caused by a loose battery. If the battery is not screwed in properly, it won’t be able to fully charge and the indicator light will continue to blink.
Why does the Penguin SE special edition blink?
The Penguin SE Special Edition has an indicator light that will blink to communicate low battery life, like many other vape devices. Try charging your device to see if that resolves the issue.
What does the battery indicator light on a Pico 75W do?
The iStick Pico 75W Starter Kit from Eleaf has a battery indicator light that will blink when the battery reaches a power level of 10 percent or less. If your indicator light is blinking, your first option is to attempt to recharge the device and see if that resolves the issue.
Why does my Air 2 flash red?
The Air 2 uses red flashing lights to show you that your battery has been discharged and needs immediate attention. It will also blink rapidly if it detects a short circuit condition.
Why does the battery indicator on my Rebel 3 flash?
The indicator also flashes if you hold the firing button down for too long, putting your device at risk of overheating.
What is a T-Priv 220W starter kit?
This T-PRIV 220W Starter Kit is unique in that the LED lights are used as a fun entertainment feature that light up as you vape, with three different lighting styles you can choose from (Normal, Jump, and Fade). In other words, blinking lights might not be an issue; you may have just accidentally switched your lighting mode without realizing it.
How to turn on a vape pen?
Other vape pens use batteries with push-button atomizer activation. To turn these pens on, you’ll need to push the battery button five times quickly and hold the button down when you pull.
How to prolong the life of a vape pen?
Let your vape pen rest between hits to allow the wick to re-saturate with oil. Getting into the habit of cleaning your coil, as well as priming new coils, is another way to extend the lifespan of your coil while avoiding burnt wicks.
How to avoid burning a vape?
To avoid burning your cannabis oil and damaging your coil, use a lower wattage and a lower temperature setting on your vape pen. Using a higher setting can result in the atomizer vaporizing the oil too fast, and burning the wick. Additionally, taking shorter pulls reduces the heat exposure. If you take large draws, you’re more likely to burn your oil.
How to loosen up cannabis oil?
If you don’t have a hairdryer on hand, there are other ways to loosen up your cannabis oil. Heat a pot of water on a stovetop, until steam is produced. Then hold your vape pen over the steam for 20 seconds. This should result in the same effect as the hairdryer method, with your cannabis oil becoming less viscous.
Why is my vape pen not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn’t actually broken. More often than not, once you identify the issue with your vape pen, you’ll be able to troubleshoot.
Why is my atomizer not working?
Over-tightening: A common cause of atomizer problems is over-tightening. If you tighten the atomizer with too much force, it can sever the connection with the device . If the connection is intact but it still isn’t working, there may be an issue with the center pin (510 connector).
What does it mean when your vape cartridge is low?
If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
Why is my vape not connecting?
In some cases, the only issue is that your vape needs a quick clean and re-assembling. If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection.
What happens if your 510 pin is stuck?
If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
Why do you have to lock the fire button on a vape?
Some devices on the market allow you to lock the fire button to prevent your vape from accidentally firing while it’s in your pocket or bag.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
What does a signal mean on a vape?
Signals like these are in place to let you know of any shorts, battery faults, or damage that your device may have. Take a look at your manual or ask the staff at your local vape shop to see what safety features your device has and what the warnings could mean.
How to check if a vape pen is working?
To avoid this, just ensure that the heating coil is pulled out to the point where it’s flush with the bottom of the cartridge, which you can do by using the tip of a pocket knife, a razor blade, or paper clip. Thereafter connect it to a charged battery to check if it’s “pulling” properly. Check out this video showing how to pull out the firing pin with the aid of a paper clip. Using this simple method your vape pen should be working A-Okay. A word of caution- please be careful not to cut yourself while doing this.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
How to stop a vape pen from scratching?
The first problem is pretty straight forward, and the solution is to always make sure your vape pen has enough juice in it to avoid that scratchy feeling in your throat. Alternatively, you can check the way you’re drawing and reduce the number of puffs you take in succession. Sipping on some water can also relieve these symptoms.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
Why won't my vape pen hit?
If you find your vape pen won't hit, the reasons and suggestions are as follows: Low battery, charge your vape pen. Remember to press the power button (if your vape pen has) when you are vaping. Loose battery, if your vape pen battery is not built-in, unscrew the battery and re-screw it back in.
How long does it take for a vape pen to shut off?
Vaping over 8 seconds at one time, the vape pen will automatically shut off.
What does it mean when your vape pen blinks red?
When you pressing power button 3 times continuously, the indicator light blinking red it indicates that the vape pen switches to low mode power output.
