The Suorin Air blinking blue is a common issue that is most likely caused by either a faulty pod or vape juice interrupting the connection between pod and battery. Try cleaning the bottom of the pod with a paper towel or cotton swab as well as the connection point on the battery. You may also want to try an entirely new pod.
Why does my vape pen blink when I vape?
When Vape Pen Blinks – Why Does A Vape Pen Blink? 1 Activation Button. A very normal occurrence with a regularly used vape mod is that of dirt or something else getting stuck in the cavity that holds the activation button. 2 Battery Connection. The vape mod works on battery. ... 3 Mismatched Components. ... 4 Safety Light. ...
What should I do if my vape pen won't hit?
If you find your vape pen won't hit, the reasons and suggestions are as follows: Low battery, charge your vape pen. Remember to press the power button (if your vape pen has) when you are vaping Loose battery, if your vape pen battery is not built-in, unscrew the battery and re-screw it back in.
How do I know if my vape pen is charging?
When you are vaping, it indicates a full or near full battery power. (at least 70%) When you are charging, it indicates charge completed. When you pressing power button 3 times continuously, the indicator light blinking green it indicates that the vape pen switches to high mode power output. Why my vape pen won’t hit?
What do the lights on my vape pen mean?
1 When you are vaping, it indicates a full or near full battery power. (at least 70%) 2 When you are charging, it indicates charge completed. 3 When you pressing power button 3 times continuously, the indicator light blinking green it indicates that the vape pen switches to high mode power output.
Why is my vape pen blinking when I hit it?
This is often caused by a loose battery. If the battery is not screwed in properly, it won't be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.
What does 3 blinks mean on a vape pen?
a short circuitBattery LED flashes 3 times Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
Why does my vape flash 4 times?
Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
Why won't my vape pen hit?
If you find your vape pen won't hit, the reasons and suggestions are as follows: Low battery, charge your vape pen. Remember to press the power button (if your vape pen has) when you are vaping. Loose battery, if your vape pen battery is not built-in, unscrew the battery and re-screw it back in.
What does it mean when your vape pen blinks red?
When you pressing power button 3 times continuously, the indicator light blinking red it indicates that the vape pen switches to low mode power output.
How long does it take for a vape pen to shut off?
Vaping over 8 seconds at one time, the vape pen will automatically shut off.
Why is my vape pen blinking?
Reasons why your vape’s indicator light may be blinking. The battery is dying: A battery on the verge of dying is a common reason a vape pen begins to blink. The battery is loose: A blinking light may indicate a connection issue, or it could indicate improper installation on a unit with a removable battery. The button is stuck: A button stuck in ...
Why does my vaporizer blink?
A blinking light doesn’t always indicate that your vaporizer is malfunctioning. Such a change in your indicator’s behavior can reflect device behavior such as heat-up time, charging, and fluctuating temperature.
Why does my vape turn red?
Common reasons for color changes include: Battery depletion: Many vape pens and portable vaporizers, including PAX portable vaporizers, blink red when the battery is dying or about to die. The color will change from red once the battery is changed.
Why is my vape cartridge not communicating?
This may be because your cartridge is damaged or the threads in your battery are bent or otherwise compromised.
What does it mean when your vape is charging?
Battery charging: Color and light behavior, such as from blinking to pulsing, can indicate that the charger is connected and the vape is on its way to being fully charged.
What does the LED on a vape do?
Gabi Antunes. Aug 7, 2019. If your vape isn’t functioning properly, you’ll likely turn to the LED indicator to get an idea of what’s going on. This little window into your vape communicates its status with changing colors, steady pulsating, blinking, or other similar behaviors.
What does it mean when a vape button is stuck?
The button is stuck: A button stuck in the on position, or stuck in a partially-on position, can send mixed messages to the vape, causing it to show an error message.
What are the OLED indicators on a vape?
Thanks to the lean design of most vape mods, vaporizer manufacturers use OLED indicators to send a variety of signals to the user. Oftentimes these warnings come in the form of blinking lights of different colors.
Why is my vape not charging?
Reason #1: A Loose Battery. Sometimes, the battery connection in your vape isn’t sufficient. This is often caused by a loose battery. If the battery is not screwed in properly, it won’t be able to fully charge and the indicator light will continue to blink.
Why does the Penguin SE special edition blink?
The Penguin SE Special Edition has an indicator light that will blink to communicate low battery life, like many other vape devices. Try charging your device to see if that resolves the issue.
Why does my Air 2 flash red?
The Air 2 uses red flashing lights to show you that your battery has been discharged and needs immediate attention. It will also blink rapidly if it detects a short circuit condition.
Why does the battery indicator on my Rebel 3 flash?
The indicator also flashes if you hold the firing button down for too long, putting your device at risk of overheating.
Why is my display light blinking?
One of the most common reasons for a blinking display light is luckily also one of the easiest to resolve. It is possible that the activation button (the button you press to activate the device) is simply stuck in a slightly pushed-in position.
What does the battery indicator light on a Pico 75W do?
The iStick Pico 75W Starter Kit from Eleaf has a battery indicator light that will blink when the battery reaches a power level of 10 percent or less. If your indicator light is blinking, your first option is to attempt to recharge the device and see if that resolves the issue.
Why does my vape mod blink?
The vape mod works on battery. So one of the first thing you should check when your vape mod starts blinking is the battery. Normally the reason behind this is a loose battery or the connection being hindered by some sort of buildup.
How to Vape Properly to Max Out the Vaping Experience?
As the whole vape culture continues to expand and take over the tobacco world, many people are turning to e-cigarettes. Younger people...
Why does my vape mod wear out?
Usually when a vape mod has been used for a very long time, some of its components tend to wear out. The most obvious fix for such situations is to get a replacement for the component that has stopped working. However an issue with doing so, is that it isn’t necessary that the new component is exactly compatible with the old mod. This could be for a number of reasons, such as the battery not being the right voltage that the mod requires.
Why is my mod blinking?
If any of the above reasons are not able to solve the blinking light issue, then you might have to go for the fourth option: the blinking light is signaling a safety issue. Various safety issues are covered in the manual that comes with the mod and that is your answer to why the mod might be blinking.
How to fix blinking battery?
The best way to tackle this situation is to unscrew the battery and clean off any dust or particles that might have buildup in that area. Then the battery should be screwed back on to ensure there is no break in the connection points. This should solve the blinking problem. If not, refer to any of the other reasons mention in this article.
Is vaping a preparation?
The concept of vaping is pretty straight forward, but it does require some preparation. Even if you get a disposable e-cigarette that comes...
Can you trade in a vape mod?
To solve this issue, there are two possible paths of action; the first one is to get the component replace with another one that will be compatible with the vape mod that you are using and secondly, you could trade in the entire mod for one that works with the component. The decision is one for you to take, based on factors such as price and quality etc.
What to do if your vape pen blinks?
If your standard or disposable vape pen is blinking 10 times, the best thing that you can do is consult the user’s manual that comes with your device. In this manual, you’ll find a guide to different error messages that your vaping device can give you while you use it.
Why does my pen blink?
Sometimes, a pen blinking ten times can mean that the voltage level is too low despite the battery being properly charged. In this case, you need to look at the battery connections of your device. Most often, this happens because the connections are either dirty or not lining up exactly with the battery.
Why does my Yocan Evolve Plus XL blink 10 times?
Most often, a device blinking ten times is trying to tell you that the battery is too low to vape properly. We know that when the Yocan Evolve Plus XL is blinking 10 times, the device needs to be charged. Similarly, when the G Pen flashes 10 times, the battery is basically dead. The easy solution to this problem is simply recharging your battery.
How many times does a Pax 2 blink blue?
For example, users report that when the Pax 2 is flashing blue ten times, this usually means it needs to be replaced entirely.
Why does my phone blink ten times?
Some devices will blink ten times if you took too long of a pull off of your device. Devices are designed to automatically shut off when you’re taking too big of a hit. If this happens, try taking a smaller hit next time.
Who is Ryan from Vapebox?
Ryan is a writer at Vapebox. He fully converted to vaping in 2014 and has been educating new vapers ever since.
Do vape pens last?
Most of us are extremely devoted to our vape pens, taking them with us wherever we go and maintaining them properly so that they can last for a long time. But, even the most high-end vape pens are capable of giving us a little bit of trouble from time to time. It's also important to clean your vape regularly as natural wear and tear problems can also affect your vape such as clogged cartridges .
