
- Step 1) Prepare your concentrate for loading by gathering a small amount on the end of a dab tool. With most pens you’ll...
- Step 2) Gently apply your concentrate directly on top of the coil, and be extra careful not to actually touch the coil...
- Step 3) “Prime the wick” before you start vaping, which melts your wax down onto and around the coil which helps the pen...
- Step 4) Vape it up!!
Can you use a Liquidizer to vape wax?
Yes, but you need a wax liquidizer. I use was liquidizer pineapple Express. You put 2ml of liquidizer and one 1 gram of wax in a shot glass. Now you can use a hot water bath or the microwave for ten seconds to combine the wax and liquidizer. Next load into the chamber and vape away…..
How do you make a vape shot at home?
You’ll need at least 1 gram of concentrate or wax, a microwave safe glass dish, a dab tool (or paper clip, bobby pin, etc), 1 ml of e-juice liquid, an empty vape or wax cartridge, and a syringe. Next, add your concentrate to the shot glass followed by the e-juice liquid.
Why is my vape pen burning my wax?
That is burning your wax, not vaping it. You put the wax around the edges or the atomizer so it is close the coils, but not touching them. If you have it touching the coils you are overworking them and shortening their life, not to mention you are burning your wax instead of vaping it.
Do I need an atomizer If I have a vape cart?
Nah man so if you’re using a cartridge, you don’t need coils because the cart has coils inside already. However, if you’re using WAX, and I don’t mean the wax that comes in carts, then you need an atomizer Can u just get the oils out of it and put it in the tank ? Like normal vape juice? Should I use a higher or lower temp?

Do you put wax directly on coil?
Depending on the consistency of your extract and the depth of your coil you might even be able to put a little on the tip of your finger to load it. Step 2) Gently apply your concentrate directly on top of the coil, and be extra careful not to actually touch the coil with your dab tool.
How do I put wax in my vape juice?
The process of getting the Vape juice Start by placing the gram of wax into the microwavable jar. Then pour a few milliliters (according to the given instruction on the manual) of the liquidizer and pour it on top of the dab. Liquidizers come with different flavors; therefore, ensure that you add the one you prefer.
How do you load shatter into a vape?
Step 1: put a gram of shatter into a shot glass.Step 2: apply 1ml of Wax Liquidizer to the shatter in the shot glass.Step 3: put it in a microwave for about 10 minutes.Step 4: stir the mixture efficiently to remove the undissolved pieces.Step 5: make use of the syringe to extract the infused vape liquid.
Can you refill a vape with wax?
You will need a dab tool (usually comes with the vape kit) to load the wax concentrates on the coil. Then, place the mouthpiece back in place. Take note: you should not place too much wax on your pen when refilling since wax concentrates are sticky. They may cause the airway of your vape to clog.
How do you get all the wax to the bottom of the cart?
Just turn the cartridge upside down until all the liquid reaches the mouthpiece. If it won't come down try applying heat to the outside of the cartridge like we mentioned above. Just run the lighter back and forth on the glass for a few seconds. That should be enough to get all the good stuff out.
Can I mix shatter with vape juice?
Shatter can be vaporized or dabbed using a vape pen or a dab rig. To vape, make sure that your vape pen is specially made for marijuana extracts such as shatter or wax. Specially made vape pens like this have atomizer or the heating element that quickly heat the concentrate.
Can I put shatter in a wax pen?
Shatter, rosin, budder, crumble, and wax are all forms of cannabis that can be vaped from a wax pen. The devices are designed to handle the thick consistency of these concentrates.
How long does it take to vape a wax?
For oils with a shatter or sappy consistency this only takes about 30 seconds. For Crumble and sugar wax it may take up to a couple minutes. Step 5 - Use a syringe and blunt tip dispensing needle to extract the infused vape liquid and fill a disposable cartridge designed for thick oils.
How long does it take to make a crumble wax?
For Crumble and sugar wax it may take up to 10-15 minutes. Optional- At this point you can add flavoring if you want. Some people use regular e-cig flavoring. But, I recommend using 1-2 drops of natural terpenes for a more authentic flavor.
How to make terpenes for flavoring?
Natural Terpenes for Flavoring (Optional) Step 1 - Add 1 Gram of concentrate to a glass mixing vessel. A shot Glass works great! Step 2 - Add 1ml (about 35 drops) of EJ Mix to the Mixing vessel. Step 3 - Microwave for 10 seconds. Step 4 - Stir until all the pieces of the wax dissolve.
What is portable vape cartridge?
Portable vape cartridges are taking the medical and recreational weed markets by storm! They give users the ability quickly and discreetly enjoy their extracts without having to carry around pipes, papers, lighters, ect. A 2018 study found that 1 in 4 Cannabis users prefers using THC Vape Cartridges instead of flower, ...
How to make a sanding pot?
Slow method ( recommended) Step 1 - Make a double boiler using a pot filled with a few inches of water and an empty glass mixing vessel with a heavy bottom. Step 2 - Heat the water in the double boiler to about 175 degrees fahrenheit (about 80 degrees Celsius).
Can you use a candy thermometer to measure temperature?
You can use a candy thermometer to get an accurate reading, but keep in mind it doesn't have to be perfect. If you don't have a way of measuring temperature, Just get the water hot enough to where you just start to see bubbles forming at the bottom of the pot. See Picture.
What type of vape coil is used for wax?
Another type of vape coil used for vaping shatter or wax is a single rod ceramic coil , such as the Micro Vape Pen. This push-in style vape coil has a funnel style ceramic dish with a titanium coil wrapped around a ceramic rod. Although it looks very similar to the original Micro G Pen, the Micro Vape Pen has a much better quality wax atomizer.
What is the process of vaping dry herbs?
The “true” vaporization of dry herbs that is utilized by vaporizers like the Titan 2 Vaporizer is technically known as convection vaping, and same as the E-CLIPSE. Convection is a process in which dry herbs are loaded into a heating chamber and hot air is then blasted ...
What is the best wax pen?
There is also the Yocan Magneto – one of the most powerful and best wax vape pen ever created – that uses a ceramic coil featuring two heating layers so that wax or shatter can vaporize more evenly and provide the best quality flavoring.
What is a pancake coil?
The AGO vape pen utilizes what is called a ‘pancake coil’ – a circular and flat heating element that heats dry herbs or concentrates . Another type of vape coil used for vaping shatter or wax is a single rod ceramic coil, ...
What is the best concentrate for dabbing?
Shatter - Glass-like concentrates that are easiest to handle for dabbing. Crumble - the driest form of concentrates that's perfect for using in a dab pen or wax pen . Budder - Its consistency resembles peanut butter and it's a type of concentrate that starts out as shatter, but then due to heat and timing, it turns into budder, which can get gooey. ...
What is the difference between wax and shatter?
The difference between the two lies in their consistency and their methods of preparation. Shatter has a translucent, glass-like appearance; wax, on the other hand, is considered concentrates that are waxy and gooey. Shatter - Glass-like concentrates that are easiest to handle for dabbing. Crumble - the driest form of concentrates that's perfect ...
Which coil is best for conduction of heat?
Finally, there is the quartz coil . This glass-like option is the best available option for conduction of heat and ensuring that as little wax as possible goes to waste: This is accomplished by the quartz rod reaching heating levels that leave little wax behind.
How to melt wax on a vaporizer?
Once you press the power button, the wax should start melting. It will vaporize right away so make sure to have the mouthpiece on. When you first start, make sure to prime the wick. When you dab your wax on, hit the button for 2 seconds and let it melt onto the coil. This will keep it moist so you don't have any dry hits.
What is wax chamber attachment?
Wax chamber attachments are usually small with a metal coil wrapped a wick or small ceramic rod. They usually come with a dab stick or dab tool to help you carve out the concentrates and put it on the heating dab coil.
What is a puffco vape pen?
This sleek and thin sharpie-like wax vape pen is the Puffco Plus V2. It is the second generation of the original Plus and it comes with extra features.It's super efficient as a dab pen. it has a ceramic coil-free chamber for your wax. The bottom of the mouthpiece has a dabber on it so you can scoop it up directly from its jar and place it in the chamber. No more messy spoons.
How to pack a dab pen?
Learning how to pack your dab vape pen is very important. Go ahead and take off the mouthpiece attached to the chamber. Using your dab tool, scoop up a small piece of the wax. If you do not have a dabber tool, then you can use a paperclip too.
Why is it important to clean your vape?
Making sure it is clean can make the difference between efficient vapor and mediocre quality. The main parts that need to be cleaned is inside the mouthpiece and the chamber. That's where any clogging can start to occur.
Why do people use vape pens?
Besides for being health conscious , one of the reasons why people switch to vape pens is because of the anonymity it gives. No one knows what you're doing and it's very quick. However, more people are learning about vaporizers so it's getting harder. Here are some ways to make sure you're vaping discreetly when around other people. Always remember to be respectful and mindful of the law.
Why do dabs break?
The breaking happens due to a fragile or worn down coil resulting in getting a replacement.
