How to use a vape for the best results?
Use The Right Inhaling Technique. Long, slow draws help you to extract more of the vapor, but the length of the draw is different with each vaporizer. So, you should experiment with your vape to find the draw duration that works best for you. Most vaporizers work better if you ‘sip’ them instead of ‘rip’ them.
Are low-resistance vape coils better for high wattage vaping?
Low resistance coils can generally cope with high wattages better than higher-resistance ones, but with a high-power e-cig, you don’t necessarily need the resistance to be too low. As long as the tank can keep up with the wicking demands of high-wattage vaping, you can get great vapour production on higher-ohm coils too.
What determines the resistance of a vape wire?
The general rule is that the more a wire has been wrapped, the higher the resistance will be. Resistance is measured in Ohms by a device called an Ohmmeter and this gives its name to the two types of vaping, Plus Ohm and Sub Ohm.
Do longer draws make your vape more potent?
That does not make them any less potent than vapes with higher vapor production such as the DaVinci IQ ( Review | Buy) or the X-Max Starry ( Review | Buy ). Long, slow draws help you to extract more of the vapor, but the length of the draw is different with each vaporizer.
Why is my vape pulling weak?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
How do I fix the low resistance on vape?
Low Resistance Dry burning is one way to get around this problem because it can raise the coil's resistance. Another thing to do is add wraps to the coil, which will increase the resistance high enough so that the mod fires. If using a factory coil, either a new coil or vape is needed.
Why is it hard to pull on my vape?
Why do I have to pull so hard on my vape? Chances are, if you're pulling hard on your vape pen it's because you've been pulling too hard in the past and you've flooded the tank. Drawing hard when you vape causes the wicks to absorb more concentrate than the coil can vaporize.
How can I make my vape hits hit harder?
For a Stronger Throat Hit:Use a higher-nicotine juice: More nicotine equals more throat hit. ... Choose a higher-PG blend: If you have a sub ohm device, a roughly 60:40 VG:PG mix is good, for a pod or basic vape kit you should aim for a bit more PG than that.More items...
What does low resistance mean?
A material with low resistance requires a low potential to generate the same amount of current. Perhaps the easiest way to think about this is to say that a material with low resistance conducts well, while a material with high resistance conducts poorly. Steel, which conducts well, is said to have low resistance.
What does ohms too low mean on a vape?
'Ohms too low' or 'ohms too high' error message This SMOK warning refers to the resistance of your coil. Most SMOK users will use coils that are made by SMOK so they should not have this problem. If you have a rebuildable atomizer (RBA), it could be that the coil resistance is too low or too high.
How long should you pull on a vape?
The general rule is to wait 15 to 30 seconds before puffing again. For people who are trying to quit smoking, 30 seconds can be a long wait.
Why is my vape not hitting smooth?
0:202:02So if you are finding your liquid too harsh. And you are on the lower side of the nicotine levels.MoreSo if you are finding your liquid too harsh. And you are on the lower side of the nicotine levels. Then maybe a higher VG liquid will help you get your liquid being a lot to move there.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
Choosing the Right Vape Device
Choosing a vape tank and coil that will boost flavour is one of the first fundamental steps. Sub-ohm tanks and coils are great for both vapour and flavour production.
Choosing the Right E-Cigarette Settings
Adjusting your vape settings is probably the easiest way to maximise flavour. The best way to do this is to start with a lower power setting and gradually increase this until you find the maximum flavour delivery. This is because the ideal wattage may vary between different e-liquids.
Choosing the Right E-Liquid
All e-liquids contain VG (vegetable glycerin) and PG (propylene glycol). You’ll find that different e-juices contain different ratios of these 2 ingredients which will cause the liquid to behave differently.
Other Tips for Maximising Flavour Production
In addition to the points above regarding your device and your e-liquids, there are some more general tips that you should consider when aiming to maximise flavour.
Why is vape juice important?
Vape juice is a necessary component to vaping, and choosing the right vape juice is vital to helping maximize cloud production.
How to get rid of vapor when you're running out of air?
Right around when you feel like you’re running out of air when exhaling vapor, press your lips together slightly, tightening but not closing them. This will help the last of the air shoot out and release a pleasing cloud of vapor.
What does reduced coil resistance mean?
Don’t be fooled by the idea of reduced coil resistance. While the word “reduced” might imply less output, the reduced coil resistance actually allows more power to pass through. This means that the vaporization of your vape juice occurs much faster.
What is sub ohm vaping?
This may explain the popularity of sub-ohm vaping. This style of vaping involves a special sub-ohm coil with a resistance that is below one ohm. Reduced coil resistance can really help with maximizing cloud production.
Why does vaping make you feel uncomfortable?
Why? Because when you increase the power, the temperature of the vapor will increase. If it gets too hot, it might create an uncomfortable sensation when you actually inhale. Nobody wants to singe their throat while vaping! Happily, there’s a simple antidote. All you have to do is adjust the airflow.
What is VG in vape juice?
VG is short for vegetable glycerin, which acts as the base for this type of vape juice. It usually has a base of coconut oil, palm oil, or soy oil. It has a slight inherent sweetness, and a syrup-like texture.
How to get vapor out of throat?
This might sound funny, but give it a try: when you exhale slowly and steadily, try slightly jutting out your jaw. This can open up your throat just a little bit more, helping the vapor out.
Why is it important to draw long vapes?
Long, slow draws help you to extract more of the vapor, but the length of the draw is different with each vaporizer. So, you should experiment with your vape to find the draw duration that works best for you.
How does temperature affect vaping?
This tip might depend on vapers preference and could be subjective to some. The higher you set your temperature, the closer you will come to a smoke-like experience, and the stronger the effects of your vapor will.
Why do dry herb vapes work?
The reason is that dry herb vapes work best when the heated air can pass through the ground herb and heat it up evenly. In addition to getting better vapor, you will also get better flavor and potency because you will be extracting more of the active substances in the herb.
What size oven should I use for a dry herb vaporizer?
When choosing a dry herb vaporizer, it’s important to consider the oven size. If you’re a solo vaper, I’d suggest a vape with a small oven such as the Solo 2 ( Review | Buy) or the KandyPens Pro ( Review | Buy ). If you vape with a spouse or a group , definitely go for a larger oven such as the one of the Mighty ( Review | Buy) or the Pax 3 ( Review | Buy ).
What is dry herb vape?
It seems obvious, right? They are called dry herb vapes, after all, so the drier the herb, the better the vapor. You should always get the driest herbs you can from your dispensary, but if they’re not dry enough, then you can use a simple glass jar to get them even more dehydrated.
How long should I draw a vape?
No matter which vape you use, it will take a few draws to get the hang of it. Generally, I recommend drawing for 6-10 seconds and taking a full, controlled inhale. You can adjust the speed and intensity to find the perfect draw. If drawing is hard, you may have overpacked the oven.
Why wait to draw vapor?
The reason for waiting, in either case, is that heat continues to build up in the oven. If you combine this with the above draw technique, you can significantly increase the amount of vapor you produce.
How does coil resistance affect vapour production?
The resistance of the coil plays an important role in the amount of vapour that can be produced by your e-cig.
How does e-liquid prevent vapour from being created?
This effectively prevents new vapour from being created if your airflow is completely closed off (or close to it ).
How does airflow affect vapour?
The airflow over your coil cools down the vapour, and this makes it condense into liquid droplets. So the more airflow you have, the more condensation there is and the more visible “vapour” (i.e. aerosol) you produce. The extra airflow also “dilutes” the vapour with more air, which has the effect of puffing it out.
What is the best vape tank for clouds?
What’s the best type of vape tank for cloud vaping? While smaller vape tanks like the Innokin Zenith D22 are great for everyday, and more discreet use, to get really big clouds, you’re going to need a low sub ohm tank with a low resistance coil. One of my favourite tanks for clouds is the Falcon II from HorizonTech.
Why are mesh coils so popular?
The “fan” mesh coils in the Falcon take the basic formula but improve it by adding a conical shape, which concentrates the vapour before it reaches the mouthpiece. This boosts the flavour you get as well as the improvements to the vapour production that come with any mesh design.
How many watts does a Geekvape Obelisk 200 vape have?
Although surprisingly compact, the device is powered by two 18650 and can push up to 200 watts of power. It’s also paired with the excellent Zeus tank.
When you're not sucking hard enough, do you need to inhale?
Inhaling Technique – When you’re not sucking hard enough. Yes, I just used that title! To get lots of vapour, you need enough airflow to cool the coil and help your cloud condense. Even when the airflow setting on your tank is at maximum, it’s no good if you’re not inhaling enough to make use of it.
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
Can you burn a wick on an e-cigarette?
Most disposable e-cigarettes lack any kind of temperature control functionality. If you maintain such a fast vaping pace that you’re continually vaping before the wick has a chance to absorb more e-liquid, you may burn the wick. Slow down.
Should I Use High or Low Resistance Coils?
Two different types of vape coil. The ultimate question. ‘Should I use high or low resistance coils?’ Whichever you choose, myCigara are here to support you.
What are Vape Coils?
Vape Coils are one of the most important components of any vaping kit. Every vaping device is built around a coil, which is tucked away safely inside.
Resistance 101
As briefly mentioned, the type of vape coil you use may vary due to its material, but also its resistance. The last time you heard that word was probably during a GCSE Science lesson, but resistance levels are an incredibly crucial part of vaping. Every electrical device has resistance and exists to keep us safe.
Low Resistance Coils
Low Resistance coils (often referred to as Sub Ohm coils) have a resistance that is below 1.0 Ohm, which is why they are called ‘Sub’ Ohm. These coils are stereotypically associated with more experienced vapers and they are often found with more advanced vaping kits.
Should I Use High or Low Resistance Coils?
The answer is…completely up to you! Here at myCigara, we understand that vaping is an exciting journey of getting to know your device, flavours and what suits you. However, we do have some honest advice that keeps you directly in mind.
Why is Thinness (or Thickness) of Vape Important?
As I mentioned above, there are several reasons why you want to pay attention to the thickness and thinness of what you’re vaping.
How many kinds of e juice are there?
That’s why e-juice manufacturers are going all out on them. Right now, there are more than 7,000 kinds of flavors out there. Some of them are synthetic. Others are natural. Some are delicious. And others are gross. And we still need studies on most of them, so….
What Goes Into an E-Liquid (Well, Usually)?
I’ve written extensively about PG and VG here, so make sure to click that link if you want more info about these two e-liquid bases (a VG base and a PG base).
Why is syrup thicker than water?
The higher the viscosity of an e-liquid, the worse the absorption properties get since it means that the liquid is too grimy to be absorbed the right way. Essentially, thicker juices can’t carry flavor properly. But, they produce more vapor.
Can you boost up VG vape juice?
In order to boost up the flavor of your juice look for flavorings that are suspended in VG. This may be a bit of a challenge since most commercially sold vape juices are suspended in PG.
Is vape juice full bodied?
But, a lot of times, it’s the feel of the vape juice that’s a bit… off. It doesn’t really fill up your lungs. It’s not full-bodied. Or it’s too full-bodied. All of this has to do with how thick – or thin – your vape juice is. This is called vape juice viscosity. And it can make or break your vaping experience.
Can you use vodka to clean coil heads?
Well, you can. Adding about 5-7% of vodka to your e-liquid will thin it out nicely. This is why many vapers suggest using vodka to clean coil heads. But don’t go overboard. Usually, 5 to 7% of alcohol will thin out your vape juice nicely. Any more than that will burn your throat right off.
Choosing The Right Vape Device
Choosing The Right E-Cigarette Settings
- Adjusting your vape settings is probably the easiest way to maximise flavour. The best way to do this is to start with a lower power setting and gradually increase this until you find the maximum flavour delivery. This is because the ideal wattage may vary between different e-liquids. With cloud-chasing, you will want to use a high wattage in order to create the biggest vape clouds. Ho…
Choosing The Right E-Liquid
- All e-liquids contain VG (vegetable glycerin) and PG (propylene glycol). You’ll find that different e-juices contain different ratios of these 2 ingredients which will cause the liquid to behave differently. Cloud-chasers tend to choose e-liquids with a higher VG - this causes the juice to be thicker, creating more vapour and thicker clouds. When it comes to flavour-chasing, it’s slightly …
Other Tips For Maximising Flavour Production
- In addition to the points above regarding your device and your e-liquids, there are some more general tips that you should consider when aiming to maximise flavour. First of all, you want to avoid ‘vaper’s tongue’! This is what happens when you vape the same flavour too much and begin to become ‘immune’ to it. You should try using different flavours every couple of days in order to …