When this happens the most likely cause is that the firing pin in the cartridge doesn’t have proper contact with the battery. This can happen when the cartridge is screwed in too tight.
Why won’t my vape pen charge?
Sometimes your vape pen doesn’t produce any vapour even when the battery shows that it’s charged. When this happens the most likely cause is that the firing pin in the cartridge doesn’t have proper contact with the battery. This can happen when the cartridge is screwed in too tight.
Why is my vape cartridge leaking?
A leaking cartridge can be a real put off. This happens mainly due to: Screwing in your battery charger too tightly to the cartridge. All components should be threaded together to get just the right amount of contact. Leaving your vape pen in the car during hot weather can also cause the cartridge to leak.
What to do if my vape cartridge is clogged?
Vape Cartridges 1 The holes in the cartridge may be clogged with oil. Try warming your cartridge with a hair dryer (lowest heat setting)... 2 Prime your coil by taking “dry hits” from your cartridge without the battery, and blowing gently into it. 3 Make sure the battery is turned on and fully charged. More ...
Why is my vape pen blinking?
The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged. To see if this is the case, charge your vape until ...
Why is my cart not hitting on my battery?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How do I fix the connection between battery and cart?
0:201:16How Do You Fix a Vape Pen Battery? - O2VAPE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd screw that on too tight. So a very simple fix what we often tell people to use is just a paperMoreAnd screw that on too tight. So a very simple fix what we often tell people to use is just a paper clip. And if you stick the paper clip in between the connection plate and the threads.
Why is my vape lighting up but not hitting?
A disposable vape uses an airflow sensor to detect when you puff. Sometimes, a disposable vape that doesn't hit isn't working because the airflow sensor isn't sensitive enough or because the sensor is blocked by condensation inside the device.
Why did my vape stop blinking?
And when completely charged, that blinking usually stops or stays constant. If the vape battery only blinks for a few times and stops when you put it onto the charger, it can mean a variety of things. For example, sometimes a vape may blink a few times to indicate that the battery is properly connected and charging.
How do you fix a cart that won't fire?
0:101:25How to fix your cannabis vape pen and cartridge connection issueYouTubeStart of suggested clipEnd of suggested clipAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gentlyMoreAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gently catch underneath the edge of the connector. And tug.
How do I know if my vape is broken?
There are some recognisable ways your e-cigarette shows you that it needs a new coil, as well as a few less obvious ones.Your Vape Tastes Burnt. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
How do I get my vape to work again?
The best way around this problem is to vape with one of your fingers around one of the inlet vents. This increases the airflow pressure and might get the sensors up and working again.
How long does it take for your lungs to heal from vaping?
After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
What do the lights on a vape pen mean?
Your vape pen will have a light indicator on the LED to let you know what the battery needs. The low battery signals with a red light or flashing white light (depending on the model), meaning you need to charge it. Once the light on your screen turns green you know it is fully charged and ready to be used.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
Why is my vape not charging?
Reason #1: A Loose Battery. Sometimes, the battery connection in your vape isn’t sufficient. This is often caused by a loose battery. If the battery is not screwed in properly, it won’t be able to fully charge and the indicator light will continue to blink.
What does the battery indicator light on a Pico 75W do?
The iStick Pico 75W Starter Kit from Eleaf has a battery indicator light that will blink when the battery reaches a power level of 10 percent or less. If your indicator light is blinking, your first option is to attempt to recharge the device and see if that resolves the issue.
What is a smok starter kit?
The SMOK ProColor Starter Kit is another SMOK brand option with the trademark use of innovative LED lighting features, largely as a fun addition to your vaping experience. As you might guess from the name, the ProColor offers a range of color options – 12 to be exact – that you can choose for your device’s LED lighting. If you have noticed the LED lights turning on or off, cycling, or simply in a different color than you initially chose, you may have inadvertently changed the setting. Your first step should be to check the LED feature. If you aren’t able to resolve it with that approach, consult the user manual for next steps.
Why does the Penguin SE special edition blink?
The Penguin SE Special Edition has an indicator light that will blink to communicate low battery life, like many other vape devices. Try charging your device to see if that resolves the issue.
Why is the Rocket 3 LED red?
For instance, the status of the mod’s battery is conveniently communicated as the LED light changes from green to red as the battery discharges. A low battery that requires immediate attention is pointed out by seven flashes of the LED. And, a short circuit causes the device to flash three times and shut down.
What is a T-Priv 220W starter kit?
This T-PRIV 220W Starter Kit is unique in that the LED lights are used as a fun entertainment feature that light up as you vape, with three different lighting styles you can choose from (Normal, Jump, and Fade). In other words, blinking lights might not be an issue; you may have just accidentally switched your lighting mode without realizing it.
Why is my display light blinking?
One of the most common reasons for a blinking display light is luckily also one of the easiest to resolve. It is possible that the activation button (the button you press to activate the device) is simply stuck in a slightly pushed-in position.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
How to remove air bubbles from a cartridge?
One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.
How to clean a clogged mouthpiece?
Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. It also helps to regularly clean your cartridge.
Types of Cartridges
Before we go into our troubleshooting tips, it’s important to know the different types of vape cartridges you can use. The type of cartridge that you purchase impacts the types of common issues that can come with it. The two main types of vape cartridges are:
Get Your Vape Cartridge Today from Remedy!
Here at Remedy, we are dedicated to providing the highest quality medicine and products to our valued patients. Visit our menu to place an online order and sign up for our VIP program to receive our daily special text messages.
How long do you have to use a disposable vape pen?
Disposable Vape Pens. Once you take the first “puff” or “draw”, the battery is “on” and cannot be recharged or turned off. You usually have up to 30 days to use all the product before the battery could die. You do not want to try it out and then save for later because it may not have battery left if you wait too long.
How many times do you push a battery button?
Push button style batteries have a singular button that must be pushed five times rapidly to turn on and off. That same button can then be pushed three times rapidly to cycle between low, medium and high temperature settings. Those heat settings are usually indicated by varying light colors.
What is a pull to draw battery?
Pull-To-Draw and Push Button Batteries. A vape cartridge can be inserted into either a pull-to-draw or push button style battery. Pull-to-draw batteries only require the user to “puff” or “draw” to use. Push button style batteries have a singular button that must be pushed five times rapidly to turn on and off.
How many times can you press a push button battery?
The Push-Button style batteries usually include multi-click functions (Rapidly Press button 5 times to make sure it is turned on and press button rapidly 3 times to cycle between low, medium and high temperatures).
Can you bring a disposable pen back to the dispensary?
We understand there can be much frustration when your disposable pen, cartridge or battery does not function as expected. Before bringing them back to the dispensary for further inspection by a technician, there may be a way to troubleshoot the item on your own before making the trip.
Why is there an LED light behind my vape?
You may want to know that the LED light behind your vape’s fire button is used by most manufacturers to give you any warnings or signals that could interfere with your vaping experience , especially if the device doesn’t have a digital display.
How to stop vape from firing?
To test if this may be the issue with your vape, press the fire button three times in quick succession, then give it another go.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What to do if your vape connectors are skew?
If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection. With clean hands and on a clean surface, try taking apart the various parts of your vape and wiping them with a dry cloth or tissue. Then, reassemble it and try to have a hit. 5.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why is my fire button stuck?
Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.