What is the think vape Thor 200W TC box mod?
The Think Vape Thor 200W TC Box Mod is built for ergonomics and high-performance functionalities, crafting a lightweight shell integrated with the advanced ST200 Chip with a suite of comprehensive outputs and TC settings.
How do I use THOR's Hammer?
No worries, THOR's Hammer will beat them into shape. Insert the first image, size and position it to taste. Then select it and click Memorize. Insert another image and, while it's still selected, click Hammer. Insert another image and, while it's still selected, click Hammer. Insert another image and, while it's still selected, click Hammer.
What is the think vape Thor made of?
The Think Vape Thor is constructed with lightweight ABS material, implementing a refined curvature structure that's comfortable to hold in-hand with ergonomically placed adjustments buttons and 0.96 inch OLED display. Please have a great understanding and technical knowledge on how to use this product in order to properly use it.
What are some tips and tricks for playing Thor?
Here are a few little tips and tricks that may not be immediately obvious. You can customize THOR's buttons onto other ribbon tabs or even onto the Quick Access Toolbar (QAT) so they're available all the time; no need keep popping back to the PPTools tab each time you want to whack something with The Hammer.
Which way does the vape battery go in?
1:312:38How to change the batteries in your vape device - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe end with something goes is positive goes to the positive end.MoreThe end with something goes is positive goes to the positive end.
How do you put a battery in a mechanical mod?
8:3212:47Mechanical Mod "Mech Mod" Safety tips ~ Battery safety is key - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow one thing I like about this Wiz mech skyla Don is the hybrid connection screws on first. So youMoreNow one thing I like about this Wiz mech skyla Don is the hybrid connection screws on first. So you get the opportunity to have just one more look before you put the whole thing down.
What batteries does the hammer of God take?
Technical details Vaperz Cloud's Hammer of God v3TypeFully mechanicalBatteries4x 18650 (highdrain) Combination of parallel and series circuit - not included -Engraving"Hammer of God" lettering and logo serial numberDegasing holesyesSerial numberyes7 more rows
How do you put together a vape mod?
0:053:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAn external charger is best step two insert your battery. Make sure to fit them properly. And notMoreAn external charger is best step two insert your battery. Make sure to fit them properly. And not upside. Down look at the positive. And negative signs. Step three check your coil.
How do you use a mechanical mod?
Mech mod vapes are simple to operate. The housing encases the battery where it (battery) is positioned in between the top and bottom caps. The top cap connects to the positive contact while the bottom cap connects to the negative contact of the battery. To fire the mech mod, you need to push the button.
What wattage do Mech Mods vape at?
At 0.40 ohm, you will take 176 watts in the mouth and at 0.50, you will be around 141 watts. If you are looking for a Mech vaping around 100 watts, then you should aim for a resistance of 0.71 ohm. And beware, we are talking about the stacked.
Who makes Hammer of God vape?
Vaperz CloudHammer of God - Vaperz Cloud The Hammer of God is back and craftier better then ever. The iconic design that compacts four 18650s into a small power house which gives you 8.4 volts and double battery life.
Who makes the Hammer of God?
Hammer of God: Giertz, Bo: 9780806651309: Amazon.com: Books.
How many watts is the hammer of God?
Constructed from aluminum-alloy, the chassis of the Hammer of God contains Evolv's DNA250C Chipset, managing the power from four 18650 batteries to deliver up to 400W of power.
How do I put my vape back together?
How to Refill a Vape TankTo refill your top-fill tank, start by removing it from the body of your e-cig mod.Unscrew the base and carefully remove the coil. ... Next, unscrew the top of the tank to add your e-liquid. ... Reassemble your tank and screw all the pieces back together tightly.More items...•
How do you use a vape step by step?
It's a simple technique.Slowly draw vapor into your mouth for a few seconds.Hold the vapor in your closed mouth for a second or two.Open mouth and breathe in the vapor to your lungs (not a “swallow”)Exhale after vapor is in lungs.
How do you use a vape mod for beginners?
All you need to do is hold the fire button down while you draw vapor from the mouth piece. E-liquid and oil vape tanks will put off vapor almost immediately, while it may take a dry herb or wax atomizer a few seconds to heat up and put off vapor.
What glue do you use to make a hammer?
Glues, Epoxies, Washers, Screws, Bolts, Heat Shrink, Tape, Magnets, Wires, Etc. - These will all depend on how you build your own hammer. I mostly used super glue and hot glue for the batteries, since I wanted them to be semi-removable later if I decided to spring for Lithium batteries instead. I used a set of 4 neodymium magnets to help keep the lid of the hammer closed, they sort of work.
Can you disassemble an oven transformer?
Microwave Oven Transformer - You'll want the largest one possible that's assembled with an "E" piece and an "I" piece cheaply welded together. That way you'll be able to disassemble easily with a dremel cutting wheel or angle grinder without damaging the windings. This tutorial illustrates how to do that in detail. And this great article by K&J Magnetics explains why the "E" shape is so important for holding strength. You might even be able to just buy the "E" laminations online...
suspectK Vaping Master Verified Member ECF Veteran
I had to mod my tobeco version's firing pin... just shoved a piece of copper in replace of spring for a temporary fix.
Funk Dracula Ultra Member Verified Member ECF Veteran
Got some extra cash for a few new vape toys, and been really interested in the hammer mod clone (I buy what I can afford). I always wear a Mjolnir (Thor's hammer) and to find a mech mod with one engraved into it speaks to me in many ways.
Funk Dracula Ultra Member Verified Member ECF Veteran
Eh, oh seems to be a hit or miss depending on which manufacturer I go with. I have heard iffy thing about it due to the 510 pin. I was just curious if it was a deal breaker in a lot of ways. Personally I don't sub ohm often, I have a few setups I use for that and mostly for show.
Funk Dracula Ultra Member Verified Member ECF Veteran
Just recently the Hcigar Hammer can be had for $20 cheaper than you can find it anywhere else at 101vape.
How to set up Thor?
Start by setting up THOR to work the way you want it to work. You'll do this in the THOR Options dialog box. Click Options to open it. SUGGESTION: The settings should match the screenshot above to begin with. If not, change them accordingly. That way, THOR will work the way most people want it to, most of the time.
What does thor do when you click Memorize?
When you click Memorize, THOR records the size and position of the currently selected shape. If nothing is selected, THOR records the size of the current slide. The way it "hammers" other shapes into this "window" depends on your Options settings.
What is thor in PowerPoint?
THOR is a PowerPoint add-in that can memorize the size and position of any shape on a slide (or the size of the slide itself), then later "hammer" any other selected shape (or shapes) to the same size and position.
Where is the Thor group in PowerPoint?
Once the installation finishes, start PowerPoint. You'll see a new PPTools tab on your PowerPoint ribbon. At the left side of the tab, there'll be a THOR group with several icons:
What happens if you unload Thor?
If you Unload THOR, you'll be able to re-load it by visiting this same dialog again. If you Remove THOR, you'll need to re-install it. The simplest way to do this is by re-running the THOR_Setup.MSI file you downloaded to install THOR.
Where is the alignment button on Thor?
Alignment When THOR resizes a shape, it can center it on the previously memorized area or it can align it to the upper left, lower left, upper right or lower right corner of the memorized area. Use the Alignment radio-buttons to choose which option you want.
Do not distort when resizing?
Don't distort When resizing a shape, THOR can maintain its aspect ratio (ie not distort it) or if you prefer, THOR can force the shape to the memorized area even if that will cause distortion. Put a check next to Don't distort to prevent distortion. Notice that if you uncheck Resize, Don't distort becomes grayed out.