Switch display mode: Keep pressing up button and down button simultaneously for two seconds,the screen display will rotate 180 degrees. Switch vaping modes: Long press the mode button for three seconds to switch among VW (H/N/S) /VT (Ni200, SS, Ti)/ TCR / BYPASS / CCW / CCT modes.
Full Answer
How do I set up my vaporesso swag?
Therefore, please go through the details of Vaporesso Swag settings so that you can get familiar with your beloved device in a short period. Press the fire button 5 times within 2 seconds to turn ON/OFF the device. Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale.
How to use swag px80 vape?
SWAG PX80 is using the powerful GTX coil platform, and the suggestedpower need to be noticed before start vaping. 6. Start Vaping Press the power button to enjoy extraordinary vaping experience.
How to replace the coil of the swag pxbo?
Install the Coil Take out the col from the packago of the SWAG PXBO, and insert the collfirmly into the POD. 2. Replace the Coil 1) Please confirm the POD is empty before coil replacing.
How do I use the user manual for the swag starter kit?
Vaporesso Swag Starter kit User Manual. Switch On/Off: Press the fire button 5 times in quick succession within 2 seconds to turn the device on. In the same way, the device will be powered off after 5 presses.
How do I change the mode on my swag vape?
Long press the mode button for three seconds to switch among VW (H/N/S) / VT (Ni200, SS, Ti) / TCR / BYPASS / CCW / CCT modes. Twisting the air ring around the bottom of the tank to adjust airflow. And screwing out the lip on top to fill the E-liquid into the chamber.
How do I change my vape settings?
How Do I Change Modes? Most mods will allow you to change between modes by pressing the fire button three times rapidly, and then either scrolling through using three more clicks of the fire button, or using the + and – buttons.
How do I unlock my swag vape?
Keep pressing mode button and “+”button simultaneously for two seconds when the device is powered on, then the up and down buttons will be locked and the screen will display “SYSTEM LOCKED”. In the same way, pressing the up and mode buttons can be unlocked and the screen will display “SYSTEM UNLOCKED”.
How do you reset the puff counter on swag 2?
Here you can change between Pulse Mode, Power Eco, Smart Temp Control, DIY Mode, and system settings. In settings, you can change brightness, flip the display screen, reset puff counter, and a few other settings. You can lock the power/fire button on the Swag II by simply fast clicking the fire button 3 times.
What do the colors on my vape pen mean?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
How do I change the voltage on my vape?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
How do I change my Vaporesso swag 2 settings?
How to Change Vaporesso SWAG 2 SettingsGeneral Settings:Replace the coil. -Remove the base of the tank. ... Install the Tank. Connect the tank to the MOD by screwing the 510 connectors. ... Fill the E-liquid. Regular Version. ... Adjust the Airflow. ... Start the Device. ... Choose a Mode. ... Options in DIY MODE.More items...•
What is pulse mode on Vaporesso?
Pulse mode isn't the most common vape mode, but the Vaporesso Gen S in particular offers the feature to vapers. Essentially, the mode switches the relatively consistent output of most devices by a regular pulsing of output, which occurs every 0.2 seconds as long as you hold down the fire button.
Why is my Vaporesso blinking red?
If the light blinks five times, there is a problem with the pod; either the resistance if the atomizer coil is incorrect, or the Vaporesso Xros isn't detecting the pod at all. Check under the pod for condensation that could prevent the pod from making a good connection with the device.
How do you reset Vaporesso puffs?
Reset puff counter: Press the mode button 3 times. Press '+' 4 times to access system settings, select puff counter 'reset'.
How do you put Flavour in Vaporesso?
0:522:19Vaporesso XROS Pod Kit Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo fill insert your e-liquid bottle into the black hole. And begin filling once filled let the e-MoreTo fill insert your e-liquid bottle into the black hole. And begin filling once filled let the e-liquid soak into the coil for 5-10. Minutes place your mouthpiece. And pod back together.
How do you unlock Vaporesso?
Keep pressing mode button and “+” button simultaneously for two seconds when the device is powered on, then the up and down buttons will be locked and the screen will display “SYSTEM LOCKED”. In the same way, pressing the up and mode buttons can be unlocked and the screen will display “SYSTEM UNLOCKED”.
How to use a e-liquid drip?
1) Regular Version. Twist the top cap and fill the e-liquid through the slot. -. Lock the top cap back into place. Please wait for 5 minutes for the e-liquid to soak into the coil. 2) Child-protection Version. Pull out the drip tip and twist the top cap. Fill the e-liquid through the slot.
Is the Swag II a vape?
The Swag II is an old product on the vape market. However, are there any problems in the process of using it? Don’t worry, here are complete guides on how to use it correctly.
How to use a SWAG PX80?
The SWAG PX80 is a pretty typical pod system that’s simple to use. Five clicks of the fire button to turn it on or off. Three clicks of the fire button to lock the adjustment buttons. Press up or down to adjust wattage. Hold up and down to enter the menu. The menu is basic, but it has a few modes.
What is a SWAG PX80?
The SWAG PX80 is a pretty small AIO system that’s very pocketable. It’s similar to their SWAG 2 kit, which was inspired by the popular Pico design where the battery cap is on top of the device next to the tank. It’s essentially a SWAG 2 kit but in AIO form. It’s got enough weight to feel solid and well-built without feeling too heavy. It stands approximately 99.7 mm x 47.9 mm x 25.1 mm. It’s not much bigger than an advanced pod device; it’s essentially the same size as their PM40 but just a bit wider to fit in the external 18650 battery.
How many watts does a SWAG PX80 have?
It comes with two coil options. A 0.2-ohm mesh coil rated for 45-60 watts. A 0.3-ohm mesh coil rated for 32-45 watts.
What battery does the Vaporesso XL have?
Other than that, it takes a single external 18650 battery, uses a fire button, and comes with a proprietary pod tank that has a 4 mL capacity. The tank takes the widely available GTX coils, which have been used by Vaporesso in a variety of devices in the past.
Is Vaporesso coil good?
Overall, the coils are good and easy to find too. Vaporesso is using this line with a wide array of tanks and pods, so you probably won’t have a problem finding coils in the foreseeable future. Vaporesso lists the charging rate of the device at 2A.
Can you use a 0.2 ohm coil with a DL vape?
Both coils are fine to use with the kit, but when you buy replacements, it’s best to go for the 0.2-ohm coil if you want a DL vape—if you want a loose MTL then you should check coils from the lower-wattage range. Overall, the coils are good and easy to find too.
