How To Use The Vision Spinner 2
- Attach the Atomizer. Line up the Threading Connection on your atomizer to the Spinner 2 and then turn it until it’s tightly secured.
- Turn On The Vision Spinner 2. Turn on the Spinner 2 by using the method above. Once you see the lights, you’re good to go.
- Begin Vaping. Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2.
What kind of vape pen is the vision spinner 2?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms!
How to use a vape pen?
Simply press the button and inhale while keeping the button depressed. Some vape pens, especially those for use with cannabis oils, may not have the button, so all you need to do is inhale (known as “auto draw”). Small sips are generally the way to go, so avoid inhaling as hard and as deep as you can.
How do I Turn on a vaporizer pen?
Even if you are not new to vaping, we hope you find some helpful information along the way. To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on.
How to use a vision spinner II atomizer?
Attaching the Atomizer The first step is lining up the threading connection of the atomizer to the spinner II. Turn it till it is secured tightly. If you want to adjust the voltage output, now is the time to do so. Activate the Vision Spinner II Turn on the device with the method explained above. When the lights flash, you can proceed.
How do you use a spinner pen?
0:002:14How to use your vision spinner - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not going to turn on no matter how long how many times turn it back on five clicks one twoMoreIt's not going to turn on no matter how long how many times turn it back on five clicks one two three four five blink blink blink. You're ready to go okay.
How do I know when my vision spinner 2 is charged?
0:191:06How to charge a vision spinner battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake a spinner screw. It into the other end of your USB charging cable now. I have to emphasize doMoreTake a spinner screw. It into the other end of your USB charging cable now. I have to emphasize do not overtighten just finger tighten connect it twist it finger tighten to a point.
How do you turn on a spinner vape?
As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times.
What is a spinner 2?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.
Why does my vape blink 3 times?
Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
How do you know if your vape is fully charged?
The light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.
How do you charge a spinner 2 vape pen?
Simple unscrew your battery from your Clearomizer and clean the battery contact area then screw clockwise into a suitable eGo Charging Lead – but do not over tighten. The eGo Charging Lead has a USB Input which can be put into a PC USB slot or a suitable eGo Mains Wall Charger.
How do I charge my EVOD twist without charger?
4:105:05How to charge any E cig without a charger - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as thatMoreSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as that and that was off so now it's on. It was off before so that's how you know it was charging.
How do I charge my Cartisan battery?
0:541:38How to Properly Charge Your 510 Thread Vape Battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe correct way to charge your battery is to use a laptop or a standard 5 volt black charger thatMoreThe correct way to charge your battery is to use a laptop or a standard 5 volt black charger that you plug into the wall. And what you're going to want to do is you're going to want to plug in your
How much is an ooze pen?
$19.95Ooze Slim Pen TWIST Battery w/ Smart USB – Variety of Colors (MSRP $19.95) Ooze vape pens are an industry leader for many reasons.
Who makes the vision spinner 2?
Central Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back! If you are looking for a high-performance E-Cig, give the Vision Spinner II Variable Voltage 1600mah a try.
What voltage is needed for a Spinner II battery?
The Spinner II Battery requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as iPhone chargers, will damage the battery.
Can you use a non standard charger on a Spinner II?
Any use of non- standard chargers, especially with higher output such as iPhone chargers, will damage the battery. Usage of non-standard chargers on Spinner II is strictly is dangerous and immediately invalidates the warranty.
Vision Vapros Spinner 2 Vape Pen Battery 1600mAh
The Vapros Spinner 2 is the authentic version of the most popular vape pen batteries. It features 1600mAh capacity, a variable voltage of 3.2V-4.8V, a battery level indicator, and a 510 thread connection to fit most of the cartridges including eGo.
Authentic Vision Spinner 2 Vape Pen
The Vapros is an authentic Vision Spinner 2 vape pen with an authenticity code on the package. The authentic Vision Spinner 2 vape battery is manufactured by visionecig.
Vapros Spinner II Features
Cartridge Detection, Short Circuit Protection, and Low Voltage Protection.
What is a spinner 1 pen?
The spinner 1 is a small and sleek pen design. Spinner 1 is one of the pens in the spinner line to use the eGo batteries fitted with a 510 threading. But with recent ratings, shows that the spinner batteries perform better than the eGo batteries.
What to know about spinner pen?
One thing to note about using the spinner pens is that you have a very reasonable investment. You are sure that you get quality products that last long and give you an above-average user experience even with their low prices.
How much mAh does a Vision pen have?
The pen has so much power, supplied with a 1600 mAh rating that the original vision cannot compare—because the original vision vape only had between 650-1300 mAh powers.
Awesome
It was an great experience and I will definitely order from y'all again. Thank you for such a great experience
It works for me
Like the bigger battery size it stays charged much longer. Just wish they would come with the charger. But all in all I like it. "It gets"
Good batteries with multiple thread
Good batteries with multiple thread types. Supports several types of devices.
What voltage does a spinner battery drop to?
Low Voltage Protection: When the battery voltage drops to below 3.3 volt s, the battery will shut down to protect your device. Over-Discharge Protection: The Spinner battery will automatically turn off upon discharge to prevent it from overly depleting the power.
What is a vision spinner?
The new Vision Spinner is a variable voltage vape mod and features a large 1600mah battery and is not much wider than your standard eGo-t. In addition, the Spinner 2 has a more comfortable feel and not to mention a stylish new look. Central Vapors also guarantees your Vision Spinner will out perform any variable voltage battery in its class or your money back!
How long does it take for Vision Spinner to charge?
Charging time is 2-3 hours. Vaping at a higher voltage will drain the battery faster.
Is e-cigarette a tobacco product?
Nicotine is an addictive chemical. Central Vapors eJuices and e-cigs are age-restricted products. Eliquid, with or without nicotine, including DIY E-Juice vapor, is also considered age-restricted tobacco products as regulated by local, state, and federal law.
SMOK STICK V8 BABY KIT
Stick V8 Baby kit consists of 2000mAh Stick V8 2000 battery and TFV8 Baby tank. Simple mechanical pen style matches with baby beast—TFV8 Baby tank, the newest pen kit brings you experience the purest taste.
The Kind Pen Mist 510 Thread Oil Vaporizer
The Kind Pen Mist 510 Thread Oil Vaporizer with LED and ceramic refillable cartridge, portable and discreet, is powered by 500mAh battery with 3 voltage levels.
SMOK NOVO Kit
Novo Vape Pod System Starter Kit is a fabulous and gorgeous vape device.It has built-in 450mAh battery and can contain 2ml e-liquid. You can drip your favorite oil into them.Innovation keeps changing the vaping experience!
Evod Twist 2 Battery
Evod Twist 2 Battery Personalized button design,flash colorful variable voltage button. Bottom scale indicates the position of voltage level. 3.2v to 4.8v smooth turning voltage adjustment dial by evod twist bottom and button.
Loosie Max 510 Thread Battery
Loosie Max 510 Thread Battery 350mAh with high-grade battery cell and LED lights, one-button control, features 4 level temperatures 2.7V, 3.3V, 3.7V, 4.1V.
EVOD Vape Pen
EVOD Vape Pen Starter Kit Very convenient for injecting and filter e-liquid. No tar and other cancer causing substances. No second-hand smoke, environmental protection.
What is a single use vape pen?
These single-use pens are generally smaller and even more discreet than their reusable counterparts. Disposable vape pens generally one-piece units, with no removable battery, no refillable heating chamber, and no button (auto draw). Once the oil/concentrate supply is depleted, you can simply discard it.
What is the part of a vape pen that draws vapor?
Mouthpiece: This is the part that you draw the vapor from and attaches to the heating chamber. Charger: Separate from the pen itself, this is usually a micro USB and is used to charge your vape battery. Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced.
How many clicks to turn on a vape pen?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you’re taking your hit. The button settings on a vape pen can also be a disadvantage.
How does a vape pen work?
Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced . That vapor is then inhaled through the mouthpiece. Yes, it’s really that simple.
What is the main part of a vape pen?
Most vape pens have the same parts, though some will differ slightly. Battery: This is what powers the device and usually the longest part of the pen. Heating chamber / atomizer: This is where your concentrated cannabis oil, wax, or dry herbs are placed to be heated until they produce a vapor. Attaches to the battery.
What is an auto draw on a vape pen?
Vape pen users have their preferences when it comes to models with activation buttons or “auto draw” (meaning they’re activated simply by inhaling on the mouthpiece). The advantage of activation buttons is that they offer more control over temperature.
What are the benefits of using a vape pen?
There is no combustion, flame, or ash involved in vaporizing. This is both cleaner and better for health. Less odor. Because smoke is removed from the process, less odor is produced, and it dissipates more quickly than smoke. More discreet.
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
Do vapes need a charger?
Most vapes will either use a Micro USB charger, or come with a vape pen charger. VPM carries Vape Pen Chargers if you ever misplace yours, or if you just like to have extras around. Batteries will generally light up once they are plugged in indicate they are charging.
