- Turn on the T-Priv with 5 clicks to the fire button. Once it’s on, 5 clicks will lock (and conversely unlock) the device.
- Three clicks of the firing button take you to the menu. You can then choose from Mode, Puff, Color, Setting, and Power submenus.
- Mode: switch between VW and TC modes.
- Under wattage, you can choose from three strength settings – soft, normal, and hard.
- Under temperature, you first dial in the desired wattage, then select from Ni, Ti, and SS wire types. Finally, you can manually adjust the temperature coefficient resistance of each metal. ...
- Puff: count how many times you’ve inhaled, adjust puff settings, as well as a limiter and reset function.
- Color: select your favorite LED color, whether the colors jump or fade, and choose whether the LED colors are always on, just when you vape on the device, only when ...
- Setting: toggle stealth mode and screen timeout (doesn’t turn off the LED panels – only the OLED display), change the screen contrast, rotate the screen orientation 180°, adjust ohm resistance ...
- Power: turn the T-Priv off.
- You can also turn the T-Priv off when the screen is locked by long pressing the fire button for 5 seconds.
- To quickly switch between VW and TC mode, hold down fire and down simultaneously.
- You can change your draw strength in VW mode, and wattage in TC mode, by pressing fire and up simultaneously.
How to use Smok T-Priv?
SMOK offers users a comprehensive range of options that will be more than enough to satisfy someone looking for a decent box mod starter kit. Turn on the T-Priv with 5 clicks to the fire button. Once it’s on, 5 clicks will lock (and conversely unlock) the device. Three clicks of the firing button take you to the menu.
How many batteries does the smok T-Priv have?
Along with several other small features like a stainless steel 510 threaded connection with a gold plated center pin, the SMOK T-Priv also houses two 18650 batteries that are held in by a hinge and lock battery access door (the batteries are sold separately).
How do I Turn on/off my Smok vape?
First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do Smok vapes work?
SMOK vapes have a lock system. This system is a protective measure to ensure that the vaporizer doesn’t misfire while it’s stored in your pocket or purse. Unlock your device, which you can typically do with 5 clicks in rapid succession.
How do you turn on a Smok a priv vape?
Turning on Your SMOK VapeFirst, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu. ... After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
How do you turn on a Smok T Storm?
1:1010:02THE SMOK T-STORM!!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it has a latch style battery door so I'll put two batteries in here and take a look at this andMoreAnd it has a latch style battery door so I'll put two batteries in here and take a look at this and looks like no battery door rattle at all with the batteries in it so to turn on the device.
How do you turn on a priv 3 vape?
3:096:40The SMOK T-Priv 3 Kit Unboxing and Quick Product Overview - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe plus button and the fire button simultaneously.MoreThe plus button and the fire button simultaneously.
How do you reset a Smok T-priv 3?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
Why is my SMOK vape not working?
SMOK Vape Won't Turn On If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.
How do you set up a SMOK vape?
1:032:19Smok Nord Unboxing & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'llMoreFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'll be using mango buy salt shaker. Once your pot is full pulls the cap push the pod into the device.
What coil does a SMOK T priv use?
At 0.4 ohms, each Q2 Coil utilizes dual vertical coils carefully engineered to work wonders and bring you that legendary SMOK caliber flavor from devices that operate at a lower wattage. They have a wattage range of 40-80W with optimal performance between 55-65W.
How do I unlock my G priv?
0:010:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
How do you charge a SMOK vape?
To charge the SMOK Vape Pen V2, connect the device to your computer using the included micro USB cable. The LED on the back of the device will indicate when the charge cycle is complete. The indicator glows red while the device charges, and it turns off when the device is fully charged.
Why is my SMOK vape blinking white?
Short circuit protection: if a load short circuit is detected, the white LED light will flash 4 times and the battery will automatically shut down the output.
What does puffs over mean on my vape?
The Function of the “Puff” Menu: This menu is designed to manage the vaping plan, it can help SMOK users to calculate the vaping puffs, setting personal plans. When the vape reminds for "max puff" or "puffs over", it means the vaping puffs have reached the Maximum.
How do I reset my SMOK I Priv?
Hold all buttons WITHOUT batteries and plug into a USB port. Keep holding for ten seconds, throw batteries in while still connected, disonnect and reconnect to turn on.
How to turn off Smok?
After you’ve enjoyed a good vape session, turn off your SMOK device by accessing the menu system again. Scroll through your options until you reach the power option, which may read “Power On” or something similar. Using the main fire button, change this to read “Power Off.”
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Why is my smok vape not charging?
It could be that your firing pin has vape juice on it , or it might not be coming in contact with the charger.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
Do you need to charge a vape battery?
The vape batteryneeds to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode.
220W OUTPUT POWER
Its max output power can up to 220W, and provides two modes for you. Temp Mode can enhance
EASY-TO-READ OLED SCREEN
The clearly OLED screen combines with entirely new operation interface. More vaping data for you,
POWERED BY 2X18650
T-Priv kit is powered by two 18650 batteries in series. The dual battery life indicator on the OLED
DELRIN DRIP TIP
The delrin drip tip will bring increased airflow and provide you with powerful draw effects.
SYSTEM
Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of
TOP REFILL SYSTEM
Top refill system makes filling as easy as it gets. Leak proof e-liquid slot can significantly solve leaking
How to unlock a T-Priv?
Turn on the T-Priv with 5 clicks to the fire button. Once it’s on, 5 clicks will lock (and conversely unlock) the device.
How to turn off T-Priv on Fire tablet?
You can also turn the T-Priv off when the screen is locked by long pressing the fire button for 5 seconds .
How big is the screen on a Smok mod?
I measure it is 18 mm from corner to corner, or 0.7 inches. This cramps the menu some in comparison to other SMOK mods. Everything is perfectly legible, but the displays on the G320 and GX2/4 are brighter. The screen sits on a raised bevel a couple of millimeters higher than the rest of the mod. You’ll be able to fit an atomizer or tank up to 25 mm on it without overhang, or interfering with that raised edge. The positive 510 pin is gold-plated and spring-mounted. I’m yet to encounter any connectivity problems with third party atomizers.
What is a T private?
The T-Priv combines a form factor reminiscent of the H-Priv with an aggressive future aesthetic. The outer shell of the mod is a hollowed-out chassis with deeply engraved detailing. Under that layer sits the LED panels – fully customizable – that illuminate when you vape and fire the device.
How to switch between VW and TC?
To quickly switch between VW and TC mode, hold down fire and down simultaneously. You can change your draw strength in VW mode, and wattage in TC mode, by pressing fire and up simultaneously. The OLED screen display is noticeably smaller than on recent offerings such as the G320, Q-Box, or GX2/4.
Is the T-Priv a stand alone mod?
The T-Priv is available as a stand-alone mod, or paired with the TFV8 Big Baby tank. This is a reliable, if somewhat thirsty, sub ohm tank that comes as standard with a range of SMOK products these days. For the rest of this review, we will deal primarily with the T-Priv mod itself. For my thoughts on the Big Baby tank, check my review of the GX2/4 kit, as well as Bill Herbst’s review of the Baby Beast tank.
Is T-Priv a good mod?
If you want to go whole-hog you could pair it with the TFV12 (like Austin Lawrence did the other day). That feels like a better match, proportionally, than the TFV8 Big Baby tank.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
What mode to use for SMOK coil?
If you’re just running the SMOK coil that came with the kit, just stick to wattage mode, as that is designed for standard power modes.
How many times do you wake a Smok mod?
Once you’ve unboxed your SMOK mod, and you have installed the correct batteries in the right orientation, simply click the fire bar FIVE times to wake the mod. There will be a short boot-up time, where you see the SMOK logo, and then, once all the software is booted, the settings menu will appear on the display.
What are the different vaping modes?
In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.
What is Trailblazer vape juice?
But then I tried Trailblazer which is a tobacco flavored juice that combines butterscotch and peanut butter. It’s rich, sumptuous, and very much an all-day vape and personal favorite of mine. I highly recommend this juice.
How to set wattage on a tank?
To set the desired wattage (or power), simply toggle the buttons up and down until you find the sweet spot for your tank.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
