Press the fire button 5 times in quick succession to turn the device on and off. After switch on, OLED display “SHOGUN” logo and software version number at standby mode. (Note: Please adjust the wattage to a proper range to match the atomizer before using)
Full Answer
How does the Ijoy Shogun Jr work?
Engineered to be ergonomic, the iJoy SHOGUN JR sits neatly in the palm of the hand, operating the intuitive firing button with ease. In addition, an OLED display screen and two adjustment buttons help the user navigate the vape systems within.
What is the Shogun Jr Kit?
SHOGUN JR Kit is a revolutionary portable power giant featuring crafted streamline design and replaceable double-sided resin panels for an astonishing look and feel. The SHOGUN JR Mod can fire up to 126W output with dual internal batteries, allowing you to keep going and vape at your best.
How do I Turn on/off my Shogun TV?
1, Power on/off Press the fire button 5 times in quick succession to turn the device on and off. After switch on, OLED display “SHOGUN” logo and software version number at standby mode.
How many watts can the Shogun Jr MoD fire?
The SHOGUN JR Mod can fire up to 126W output with dual internal batteries, allowing you to keep going and vape at your best. Featuring simple user interface for navigating multiple vape modes.
How do you turn on a Shogun vape?
Press the fire button 5 times in quick succession to turn the device on and off. After switch on, OLED display “SHOGUN” logo and software version number at standby mode. Press the fire button 3 times within 2s to enter into the main menu. Press the up/down buttons to switch among different functions.
How do you use Shogun University Mod?
6:5815:19iJoy Shogun UNIV Kit Review and Rundown - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo navigate through the menu is very simply you're gonna press this fire button 3 times 1 2 3 andMoreTo navigate through the menu is very simply you're gonna press this fire button 3 times 1 2 3 and then right there for your P is power self-explanatory.
How do I change my IJOY coil?
1:165:36How To: Change Tank Coils & How Often Should You? - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just screw it in there like. So. Like so and then you take your tank. And you screw it all backMoreYou just screw it in there like. So. Like so and then you take your tank. And you screw it all back together. Now. Every time you change the coil.
How do I turn on my iJoy vape?
2:576:39The iJoy Diamond PD270 234W Kit Unboxing and Quick ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe fire button 3 times will take you into the menu on the upper.MoreThe fire button 3 times will take you into the menu on the upper.
How long does a vape coil last?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
How do I turn on my iJoy Avenger vape?
POD Mode Press fire button three times within 2S, enter into the main menu,press "+" or "-" T button to switch to POD ", press fire button to confirm. A In POD Mode, press right or left button to adjust the voltage. 2.5V POD 4.02V PUFF 0000 COIL 0.650 B Avenger Baby/13 Page 8 6.
What coils are compatible with IJOY?
The IJOY Shogun Mesh Coil is also compatible with Captain X3, Avenger, Diamond and Katana Sub ohm Tanks. Coils options for the Katana Tank include, indeed, some of the highest performing coils specs on the market!
What coils are compatible with the IJOY diamond tank?
The IJOY Diamond Baby Replacement Coil is the original DMB Coil Series for Diamond Baby Tank, also compatible with Mystique Tank, available in 0.15ohm, 0.18ohm, 0.3ohm and 0.2ohm Coil for...
What coils are compatible with IJOY captain?
IJOY Captain X3 Replacement Coil Features:IJOY Captain X3 Coil Series.Compatible with Diamond DM & Katana KM Coils.Thread-less Coil Design.0.4ohm X3-C1 Dual Coil (60 - 90W)0.3ohm X3-C2 Dual Coil (60 - 100W)0.2ohm X3-C3 Sextuple Coil (90 - 110W)0.35ohm X3-C1S Coil (40 - 80W)0.15ohm X3-Mesh Coil (40 - 90W)More items...
What coils does the IJOY Avenger take?
0.35ohm X3-C1S Coil.
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
What is the bottom airflow cartridge?
Bottom-airflow cartridges have an air hole in the middle of the pin on the bottom of your cartridge. This allows the battery to activate when you inhale. Bottom-airflow cartridges will work with inhale and button activated batteries.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
Do vapes need a charger?
Most vapes will either use a Micro USB charger, or come with a vape pen charger. VPM carries Vape Pen Chargers if you ever misplace yours, or if you just like to have extras around. Batteries will generally light up once they are plugged in indicate they are charging.
What is a Vape?
A vape (or vaporizer) is a battery-powered device that turns e-liquid, extracts, oils, waxes, or dry herbs into vapor to be inhaled. These are commonly called, and sometimes distinguishable, as:
How To Use A Vape
There are two ways to turn on a vape. If using a push-button vape, simply click the button on the console rapidly five times. You should get an indication that the device is on, usually in the form of a flashing LED light. This is the same way to turn push-button vapes off.
Ready To Vape
Now that you’ve got the basics of vaping down pat, you can start enjoying your new vape! Remember to take care of it as you would electronics—keep it charged, refill the cartridge with caution, prevent it from turning on accidentally, etc. And most importantly, vape responsibly!
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
