To turn the mod on you have to click the fire button five times. Holding down the mode button and the plus button at the same time it puts the device into system lock while holding it down again unlocks it. When the system is locked, you can still fire the Vaporesso Revenger 220W.
How to use a revenger x mod?
Vaporesso Revenger X Mod. 1. Switch On/Off: Press the fire button 5 times in quick succession within 2 seconds to turn the device on. In the same way, the device will be powered off after 5 presses. 2. Vaping: Hold the fire button and inhale through the mouthpiece.
How do I adjust the wattage of my vape?
-To generally adjust the output wattage to enrich your vaping flavor, first unlock the touch buttons. Press the "DOWN" button to increase the wattage. Conversely, the "UP" button is for wattage decreasing.
How do I Turn on/off my Revenger?
-To switch on/off your device, press the fire button five times in quick succession within 2 seconds to turn on the device. In the same way, the device will be powered off after five presses. -To unlock your Revenger device, just quickly press the power switch from the right side three times continuously in power-on state.
How to change vaping modes in vape mode?
Switch vaping modes: After unlock the touch buttons, press the mode button for three seconds or quick press the mode button for 3 time to vaping modes selected menu and system setting menu. 1. Charging: It is with Quick Charge System and equalizing charge system.
How do you unlock Watts on Vaporesso?
1)Press the fire button for 5 times in 2s: Power on and off. 2)Continuously pressing fire button 3 times to lock and unlock the up, down and mode button. 3) Continuously pressing mode button 3 times to unlock the mode button.
How do you use a revenger vape?
0:062:08How to use the Vaporesso Revenger X - YouTubeYouTubeStart of suggested clipEnd of suggested clipFit the tank onto the base. And screw the top cap in place until it will secure. To remove the coreMoreFit the tank onto the base. And screw the top cap in place until it will secure. To remove the core reverse the previous. Process to refill the NRG tank push the marked area of the tank.
How do you power a Vaporesso?
1. Switch On/Off: Press the fire button 5 times in quick succession within 2 seconds to turn the device on. In the same way, the device will be powered off after 5 presses.
How many watts is a Vaporesso?
The battery unit delivers up to 90 watts, and produces an impressive level of vapour given its compact form Measured at 26 mm in diameter and about 10 cm in length, you won't even realize it's in your pocket. And when it comes to flavour, you won't be disappointed.
How do you change Vaporesso revenger to Watts?
Vaping Settings: -For vaping, please hold the fire button and inhale through the mouthpiece. And then release the fire button and exhale. -To generally adjust the output wattage to enrich your vaping flavor, first unlock the touch buttons. Press the "DOWN" button to increase the wattage.
How do you change the wattage on a Vaporesso luxe PM40?
Five clicks of the firing button turns the Luxe PM40 on and off. You can adjust the wattage anywhere from 5 watts to 40 watts. To change the wattage, you press the firing button three times fast. Then you can click the firing button to go in 1-watt increments or you can hold the button down to change the wattage fast.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
How do I change my vape settings?
How Do I Change Modes? Most mods will allow you to change between modes by pressing the fire button three times rapidly, and then either scrolling through using three more clicks of the fire button, or using the + and – buttons.
How do you change the voltage on a vape pen?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly.
What does turning up the wattage on a vape do?
When a vape coil is run at a higher wattage, it's able to create more vapour, thus giving you more nicotine per puff. This also means that the throat hit from your nicotine and PG is increased as well.
What does a higher wattage do for vaping?
Basically, a higher wattage is needed to produce the right amount of vapor. -Pod systems are less about lots of vapor, and more about a satisfying nicotine hit – that's why they're made for mouth-to-lung vaping, which introduces a smaller amount of vapor into the mouth before it's inhaled.
What does the button do on Vaporesso?
The Vaporesso Xros has a power-off function that helps to prevent the device from firing accidentally when you carry it in your pocket. If nothing happens when you try to vape with the Xros, you should first try pressing the fire button five times quickly to turn the device on. If nothing happens, charge the battery.
How to tell if a new atomizer is attached to a mod?
" OLD LOAD: -, NEW LOAD: + " will appear on the display. If a new atomizer is attached, press " + ", the mod will read new resistance; if not, press " - ", the mod will read at locked resistance.
What is the wattage of the OMNI board 2.0?
The OMNI Board 2.0 allows you to change the start up wattage under temperate control mode. The default wattage is 65W. You could also adjust the value of the coil within the given range. In TCR (Temperature Coefficient of Resistance) mode, the device can support different temperature control coils within different TCR value ranges and you can set the TCR at different values within proper range.
How to change CCT on a TC?
While on any TC mode, press the mode button three times consecutively to select CCT. Select and hold down the mode button to confirm and to implement any modifications to the temperature line using the plus and minus buttons (Ramp up time and consequent performance); move on to the next bar with a quick press of the mode button. When all modifications are final hold pressed the mode button to save and exit.
How to lock resistance in TC-Ni?
Lock/Unlock resistance:In TC-Ni/TC-Ti/TC-SS/TCR(M1, M2) Mode, press the "-"and mode button simultaneously for 2s will lock/unlock the resistance level, “ ” will appear on the display . Attach a new atomizer will not change the locked resistance.
How to adjust temperature on TC-Ni?
Adjust temperature:In TC-Ni/TC-Ti/TC-SS/TCR(M1,M2) mode , temperature can be adjusted from 100-315℃ or 200-600℉ by pressing up button or down button, up button to increase and down button to decrease. Each press of the up or down button will increase or decrease the temperature setting by 5℃ or 10℉. Long press up button or down button can rapidly increase or decrease temperature setting.
How to adjust bottom airflow?
The bottom airflow system can be adjusted with slight twisting of the airflow ring.
What does H stand for in a VW mod?
As an advanced Variable Wattage mode, there are 3 levels of VW: H stands for High; N stands for Normal; S stands for Soft. The default setting is Normal. VW(H/N/S) will guarantee your mod’ s ability to skillfully select the adequate average wattage for your atomizer, according to its resistance reading, automatically.
What wattage is a VT-SS?
The OMNI Board 2.2 allows you to change the start up wattage under temperate control mode. The default wattage is 75W. You could also adjust the value of the coil within the given range.
What does VW mean in mods?
As an advanced Variable Wattage mode, there are 3 levels of VW: VW-High stands for High; VW-Normal stands for Normal; VW-Soft stands for Soft. The default setting is Normal. VW (High/Normal/Soft) will guarantee your mod’ s ability to skillfully select the adequate average wattage for your atomizer, according to its resistance reading, automatically.
What is TCR mode?
In TCR (Temperature Coefficient of Resistance) mode , the device can support different temperature control coils within different TCR value ranges and you can set the TCR at different values within proper range. The Setting of TCR Mode (M1,M2): When set in TCR-M1,TCR-M2 mode
How to tell if a new atomizer is attached?
” OLD LOAD: -, NEW LOAD: + ” will appear on the display. If a new atomizer is attached, press ” + “, the mod will read new resistance; if not, press ” – “, the mod will read at locked resistance.
How to select CCT on a VT?
While on any VT mode, press the mode button to select CCT. using the plus and minus buttons (Ramp up time and consequent performance) to confirm and to implement any modifications to the temperature line; move on to the next bar with a press of the fire button.When all modifications are final set, please press the mode button to save and exit.
How to change temperature on TC-Ni?
In TC-Ni/TC-Ti/TC-SS/TCR (M1,M2) mode, temperature can be adjusted from 100-315℃ or 200-600℉ by pressing up button or down button, up button to increase and down button to decrease. Each press of the up or down button will increase or decrease the temperature setting by 5℃ or 10℉. Long press up button or down button can rapidly increase or decrease temperature setting.
How to inhale a fire?
Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale.
How much power does a coil need to be to cape?
Bumping it up to about 110W ( the limit for the coil) and opening the airflow all that way was apparently too much it muted the flavor completely, surprisingly though it was not a dry hit so you will be able to cape at these wattages.
How much liquid does the NRG tank hold?
Moving on to the NRG Tank it is quite massive as it holds about 5ml of e-liquid and at 26.5mm in diameter. The top of the tank sports an easy top fill design and an interesting splash guard mesh which covers the inside of the drip tip which in itself is massive. The drip tip is removable I was free to use one of our own with the supplied adapter. Lastly, on the bottom, there are two adjustable airflow slits that allow for optimal control.
What is VT in temperature control?
In temperature control, there is VT (Variable Temperature), CCT (Custom Curve Temperature) and TCR (Temperature Coefficient of Resistance). CCT again lets you set a custom curve for temperature, so I was able to select the best ramp up that worked the best for me.
What is Vaporesso Revenger X Kit?
Revenger X is so immersive that the device itself disappears into the experience. The mechanical buttons now give way to a highly responsive touch buttons, bringing out the more integrated look of the IML interface.
Vaporesso Revenger X Mod
1. Switch On/Off: Press the fire button 5 times in quick succession within 2 seconds to turn the device on. In the same way, the device will be powered off after 5 presses.
USB Function
1. Charging: It is with Quick Charge System and equalizing charge system. Simply plug in the USB cable to charge the battery, OLED display current battery level (0%, 20%, 50%, 80%, and 100%) and the Remaining Charging Time to get the battery fully charge. The Remaining Charging Time will be shown in every10 minutes.
NRG tank
1. Adjustment of airflow: The bottom airflow system can be adjusted with slight twisting of the airflow ring.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
What About Temperature Control Vaping?
I don’t tend to mess around with Temperature Control vaping that much; I tend to prefer wattage mode – I just like things nice and simple.
What is Trailblazer vape juice?
But then I tried Trailblazer which is a tobacco flavored juice that combines butterscotch and peanut butter. It’s rich, sumptuous, and very much an all-day vape and personal favorite of mine. I highly recommend this juice.
How much power does a sub ohm tank need?
Most Modern Sub Ohm Tanks Will Not Require More Than 80W – Even The High-Power Ones.
What happens if you prime a tank and load it on a mod?
If you prime your coil and load the tank onto a mod and then crank it up to 200W, one thing will happen: you’ll burn the coil out instantly ( and likely cough your guts up).
What does higher wattage mean?
Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor.
Do box mods run batteries?
Box mods also run multiple 18650 cells too, which means battery life is MILES better than it is on pod mods like the JUUL or single-cell mech mods like VGOD Mech Pro.
How to tell if your vape tank is obsolete?
How can you tell whether your current vape tank might be obsolete? The first sign is that your tank doesn’t have a mesh coil. Mesh coils are so much better than wound coils in every way that there’s really no reason why almost every vaper in the world shouldn’t start using mesh coils immediately.
Why do mods sag?
That’s because the power delivery of an older mod will tend to sag badly when the mod is under a heavy load.
How to tell if wattage is too high?
The first sign that your wattage might be too high is the experience that you have when you vape. Does the vapor seem uncomfortably warm? Do you find that the heat makes the vapor just a bit too intense? Maybe you have trouble tasting the flavor of your e-liquid at all because the vapor is so hot. All of those are signs that you need to lower your device’s wattage.
Can you crank up wattage on a vape?
If you prefer very short puffs, on the other hand, you can usually crank the wattage up without worrying. In some cases, it may even possible to vape above your coil’s suggested wattage range without worrying that you’ll ruin the coil. This is something that you’ll have to figure out through trial and error.
