" " Pockex Vape Replace Atomizer How To

Vape-FAQ.com

pockex vape replace atomizer how to

by Khalil Barrows DVM Published 2 years ago Updated 1 year ago
image

To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.

Part of a video titled How to use your Aspire Pockex - YouTube
0:29
1:46
Begin by unscrewing the top cap. Once separated you will see the coil attached to the top half ofMoreBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half of the tank to change the coil simply unscrew the old atomizer will replace. Simple.

Full Answer

How many watts is the Aspire pockex atomizer?

Aspire PockeX 0.6Ω Atomizer Rated 18-23 watts, the PockeX Atomizer has a 0.6Ω 316L stainless steel coil. The PockeX adopts U-Tech coil technology. Aspire PockeX Top-Fill Tank

How do I Fill my aspire pockex with e-liquid?

Aspire PockeX Top-Fill Tank 1 Unscrew and remove the top cap 2 Squirt your favorite E-Liquid into the tank ( Do not exceed the Max line when filling) 3 Screw the top cap to the PockeX tank

How does the pockex work?

The PockeX adopts U-Tech coil technology. The PockeX introduces top-filling in an innovative new way. The atomizer screws into the top cap instead of tank bottom. This allows you to replace the atomizer without draining E-Liquid from tank. PockeX’s top fill design allows you to drip, drop or pour E-liquid into the 2ML tank.

Can I replace the atomizer without draining the e-liquid from tank?

This allows you to replace the atomizer without draining E-Liquid from tank. PockeX’s top fill design allows you to drip, drop or pour E-liquid into the 2ML tank. 1. Unscrew and remove the top cap

image

How do you replace atomizer?

To replace, simply take out your old Atomizer and screw in the new one. The Atomizer is contained with the bottom base of your Clearomizer. Be careful not to spill your e-liquid during this operation by holding your Clearomizer upside down. If you get any e-liquid on your skin immediately wipe off and wash the skin.

How do you change a tank on a aspire PockeX?

How do I replace the glass on an Aspire PockeX?Make sure your tank is empty.Turn the PockeX off.Unscrew the top cap.Pull the old glass out of the tank.Push the new glass in.Replace the top cap.

How do I change the coil in my atomizer?

3:075:16Vape Tutorial: How To Change Coils On Vape Tanks & ClearomizersYouTubeStart of suggested clipEnd of suggested clipStart by applying a firm grip to the base near the bottom of the tank. With your other hand beginMoreStart by applying a firm grip to the base near the bottom of the tank. With your other hand begin twisting the top portion of the tank in a counterclockwise manner. Now that the coil head is exposed.

How do I change coil on my Aspire vape?

0:141:54How To Change A Coil | Aspire K3 Kit Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo stick the bottle. In the side like that and just give it a squeeze fill it up to just below theMoreSo stick the bottle. In the side like that and just give it a squeeze fill it up to just below the top of the chimney in the center. Get your new coil and screw that into the base of the tank.

How do I unscrew my vape tank?

Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.

How do I open my Aspire vape tank?

0:001:45How To: Fill And Prime The Aspire Revvo Vape Tank | VaporleafYouTubeStart of suggested clipEnd of suggested clipYou can unscrew the mouthpiece of a top cap and that allows you to remove the airflow ring to removeMoreYou can unscrew the mouthpiece of a top cap and that allows you to remove the airflow ring to remove the coil all that you need to do is remove the compression nut.

How do you take apart a vape coil?

To remove the atomizer coil, unscrew it by twisting counterclockwise. To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. To remove the mouthpiece, lift it straight up to pop it out of its socket.

How do I know if my vape coil needs to be replaced?

5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.

How long do PockeX coils last?

Coils generally last between 1 to 4 weeks but could be extended if the coil is broke in properly and when good care and maintenance procedures are practiced. One thing to monitor is when the coil heats up and there is a noticeable burnt taste to the vapor that the PockeX produces when it is used.

How do you prime a PockeX coil?

0:443:04Aspire PockeX Setup Video by Vapouroxide - YouTubeYouTubeStart of suggested clipEnd of suggested clipOil on screws from the top. And that's the whole replacement there. So before we get into running upMoreOil on screws from the top. And that's the whole replacement there. So before we get into running up you're going to want to prime it. So get your juice bottle open.

Build and design quality

The Aspire PockeX is a small vape mod that seems to be slightly shorter than an average smartphone. The device is simple to use and will win the hearts of people after a ruthless mod. With its small size, it comes at 86 grams, and it is very pleasant to handle and use. Its build is excellent and does not come off as stressful to use.

How to use the Aspire PockeX

The device is ready to use once the tank is filled and charged. To turn on the device, press the fire button five times consecutively and repeat this process if you want to turn it off. The indicator light flashes three times to show you that it is the moment to vape.

Aspire PockeX vs. Vision Spinner 2

For a starter, the Vision Spinner 2 is a good unit to start with. It has a sleek and stylish look which is similar to other mid-sized batteries. It has a convenient and easy-to-use voltage dial, an advanced PCB circuit, and a long battery. You can use this device with any tank of your choice.

Flavor and vapor quality

The Aspire PockeX coils create a good combination of stainless steel wires and organic cotton. The U-tech coils have a good way of diverting airflow to allow for the recycling of the drawn air twice through the coil for an unparalleled flavor and huge clouds of vapor. You have the option of choosing between two coils.

Battery and charging of the Aspire PockeX

The Aspire PockeX comes with a 1500mAh battery that has a bypass output. You are allowed a 30-day warranty on the battery from the day of purchase. The battery level indicator is found on the button and it can change its color concerning how much battery percentage you have left.

Performance of the Aspire PockeX

Filling this device for use is not an easy task. You only have to unscrew the top cap and pour in your 2ml of e-liquid into the tank. Use the max line to guide you on how much you need to vape to avoid chances of leakages and spitting issues.

FAQs about Aspire PockeX

The Aspire PockeX is a good all-in-one device that should not be overlooked. It delivers the best vapor and performance with so little maintenance needed, all you have to do is keep it working well and you will be good.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9