Once the lights turn green, you can start taking some puffs on the PAX 2. If you’re using the flat mouthpiece, place your lips around the edge of the vape, over the hole in the mouthpiece. Start with some short, light draws, like sipping on a cup of hot tea.
Full Answer
How do I use the Pax 2?
Once the lights turn green, you can start taking some puffs on the PAX 2. If you’re using the flat mouthpiece, place your lips around the edge of the vape, over the hole in the mouthpiece. Start with some short, light draws, like sipping on a cup of hot tea.
Is Pax 2 a vaporizer?
Thoughtfully designed for the discrete consumer, PAX 2 simply doesn’t look like a vaporizer, opting for a streamlined anodized aluminum body. Reduced odors and a remarkably small and light size allow for low-key consumption on the go.
How do I put my Pax screen on?
Press firmly down in the center of the screen, so that it curves in the middle. The screen should lock right in place. After inserting, flip your PAX over and tap the sides. If the screen stays put then you're good to go!
How do I know when Pax 2 is charging?
While charging: The LED indicator petals will pulse white as PAX 2 charges. The PAX 2 battery lasts for up to 6 to 8 sessions per charge, depending on many factors. To recharge your PAX 2, connect the included USB charging cable to a USB power source.
How do you change the screen on a PAX 2?
Press firmly down in the center of the screen, so that it curves in the middle. The screen should lock right in place. After inserting, flip your PAX over and tap the sides. If the screen stays put then you're good to go!
How often do you change PAX screen?
every 25 usesThese screens work to avoid build-up in your PAX 3 oven. Since they serve as a filter for your vaporizer, they need to be changed regularly (after every 25 uses). Cleaning the screens is quick and easy, just place them in a pot of boiling water and wipe them dry.
How do I change my PAX filter?
We found the best way to remove your old Pax screen is to push it out from the top using the supplied pipe cleaner.Remove the mouth piece.Insert pipe cleaner into the air hole on the top of the mouth piece and push all the way through.Once you reach the end your screen should pop right out.
How do you use the PAX 2 concentrate insert?
Simply slip the concentrate insert into the PAX 2 chamber and load it with your concentrate. The recommended temperature for vaping wax and oil with the PAX 2 is 380F. Our PAX tip for vaping wax is to clean the concentrate insert using isopropyl alcohol and a q-tip after every one or two sessions.
How do you remove a PAX screen?
0:041:25Experience use the wire brush for heavier cleaning or the pipe cleaners for lighter cleaning removeMoreExperience use the wire brush for heavier cleaning or the pipe cleaners for lighter cleaning remove the mouthpiece. And the oven lid. Insert the wire brush into the vapor path to pop out the oven.
How often should I clean my PAX 2?
every few sessionsHow often should PAX 2 be cleaned? To keep your PAX 2 in top shape and performing at its best, it is recommended to clean it every few sessions. This regular maintenance is a crucial component to reducing draw resistance, preserving flavor, and ensuring top performance with each session.
How do you use a PAX 3D screen?
Another important advantage is the easy assemble – all you need to do is flip your PAX upside down and place the 3D Screen at the bottom of the chamber. After the inhalation, simply open the lid of the chamber and let the screen fall out along with the material.
How do you clean PAX concentrate inserts?
0:402:12Start by removing the oven lid and mouthpiece. And inserting a pipe cleaner or cleaning brush fromMoreStart by removing the oven lid and mouthpiece. And inserting a pipe cleaner or cleaning brush from the top of the unit to clean out any residue in the vapor panel.
How do you clean a PAX mouthpiece?
Soak your mouthpiece with your oven screen in isopropyl alcohol (IPA) while cleaning the rest of your PAX. Use a pipe cleaner moistened with IPA to floss through the vapor tube. Use a Q-tip moistened with IPA to clean out the oven. Discoloration in the oven and on the screen is ok!
Can you smoke shatter in a PAX 2?
The official concentrate insert for Pax vaporizers, this device is meant to fit inside the chamber of the Pax 2 and Pax 3 natively. The types of concentrate you can use with the Pax concentrate insert includes BHO, rosin, shatter, crumble, live resin, and other dab-like materials.
Can you put dabs in a PAX?
0:516:14Yeah so here it is insert it and slide it on and off either.MoreYeah so here it is insert it and slide it on and off either.
How tight should I pack my PAX 2?
Pack. The PAX 2 works best tightly packed, helping the heat spread throughout the bowl. You can use the lid to firmly tamp down the contents of the oven. Smaller loads still need to be tightly packed for best performance.
How to charge a PAX 2?
To charge your PAX 2, plug the cradle into any USB charging port, then set the PAX 2 on top, contacts down, and LED petals up. The magnets will guide it into the correct charging position. The number of lit petals indicates the current charge level. When they’re all lit, the battery is charged, and you’re ready to go. PAX claims this will take about three hours the first time around, but it will take less time on subsequent charges.
How to change the temperature on a PAX 2?
To change the temperature, hold down the button for one second, press it to cycle through the different heat options, and shake to finalize your selection.
How long does it take for a vape to cool off?
Picking it up, or touching the mouthpiece with your lip or finger, will cause it to heat back up quickly. Do this for 3-5 minutes, or until you don’t smell anything coming off the vape.
How long does it take for a PAX to charge?
When they’re all lit, the battery is charged, and you’re ready to go. PAX claims this will take about three hours the first time around, but it will take less time on subsequent charges.
How many petals to start a vapor session?
Three to start, four to finish. For your first session, we recommend starting out on the third heat setting, or three red petals. That should produce a decent amount of visible vapor. As the session starts to thin out, you can raise it to the fourth heat setting to finish it off.
Can you use a PAX 2 grinder with a 4 piece grinder?
The PAX 2 works best with a very fine grind, and we find the best way to achieve that is with a two-piece grinder. If you’d rather use your four-piece grinder, you can turn the top two tiers upside down to give your herbs more time between the teeth.
Is the Pax 2 easy to use?
The PAX 2 is as easy to use as it is stylish, but our short quickstart guide will help you... Everyone loves a sequel, and the PAX 2 in particular brought a number of important quality of life improvements to an already successful vape.
How does a PAX 2 oven work?
The PAX 2 works best tightly packed, helping the heat spread throughout the bowl. You can use the lid to firmly tamp down the contents of the oven. Smaller loads still need to be tightly packed for best performance.
How to make a puck in the oven?
If your herbs are sticky and packed tightly enough, they'll form a puck in the oven that sticks together. Flip the puck out on your palm, and put it back in upside down to ensure you evenly cook both sides.
Can you draw a cigar like a vaporizer?
Like most conduction vaporizers, pulling too hard will overwhelm the heater, and your vapor will be wispy. A gentle, cigar-like draw is best to start, and as you get a feel for it, you can settle into longer, lighter draws.
Does the PAX 2 heat herbs?
The PAX 2 will heat your herbs evenly without stirring. I’ve found a tiny amount of color left in the material that is in direct contact with the oven door, but it’s not enough to warrant stirring midway through.
Grind
Grind your material as finely as possible. This will help ensure complete, consistent extraction, without any chunky bits that need to be broken up halfway through.
Pack
The PAX 2 works best tightly packed, helping the heat spread throughout the bowl. You can use the lid to firmly tamp down the contents of the oven. Smaller loads still need to be tightly packed for best performance.
Draw
Like most conduction vaporizers, pulling too hard will overwhelm the heater, and your vapor will be wispy.
Should I stir?
The PAX 2 will heat your herbs evenly without stirring. I’ve found a tiny amount of color left in the material that is in direct contact with the oven door, but it’s not enough to warrant stirring midway through.
Flip it!
If your herbs are sticky and packed tightly enough, they'll form a puck in the oven that sticks together. Flip the puck out on your palm, and put it back in upside down to ensure you evenly cook both sides.
Do you have any PAX 2 tips?
The Arizer XQ2 dry herb vaporizer is up for grabs, and it’s one of the best values in the vape...
How to clean a PAX screen?
Place PAX on a flat surface, mouthpiece side down, with the oven lid removed and the oven facing up. Generously soak a Q-tip in Isopropyl Alcohol or PAX Mouthpiece Lubricant. Carefully use the Q-tip to wipe around the edges of the screen while it’s still in the oven.
Can you soak a PAX screen?
Absolutely. While your PAX is charging, or whenever else is convenient, soak the oven screen (and mouthpiece) in isopropyl alcohol . This will save you some elbow grease as time does the work for you! Afterwards, ensure the screen is free of accumulated buildup, particularly around the edges where vapor is channeled.
