Simply screw on your favorite cartridge and inhale. If you have our 2.0 Variable Voltage Battery there are a few extra bells and whistles. If it doesn’t work upon inhale, simply click the stylus tip 5x to turn on the battery and it will illuminate.
Full Answer
Why won’t my vape turn on?
Still, if your vape doesn’t turn on even after being connected to a power source, there’s one more thing you can try. Check your battery. Is it connected to the tank?
How to fix a vape that says “no coil”?
This is one of the most commonly-effective solutions to a “no coil” error message. Check the 510 connection. Located on the bottom of your vape tank, the 510 connection is a small metal prong that must maintain proper contact for your mod to work.
How do I use Openvape?
Simply screw on your favorite O.penVAPE essential oil vape pen cartridge and pull for up to 8-seconds for the Perfect Puff every time. If you have our 2.0 Variable Voltage Battery there are a few extra bells and whistles.
How do I Return my Openvape battery?
All you need is the O.penVAPE Return form found on our warranty page. Send us your battery along with the return form to the address at the top of the form. We will then send out a brand new pen and charger to replace your old friend once your pen arrives.
Why is my vape lighting up but not hitting?
A disposable vape uses an airflow sensor to detect when you puff. Sometimes, a disposable vape that doesn't hit isn't working because the airflow sensor isn't sensitive enough or because the sensor is blocked by condensation inside the device.
Why is my open vape not working?
A loose battery can disrupt the flow of electricity, preventing your vape from fully charging. Thankfully, the fix is usually as simple as unscrewing your battery and reconnecting it. You want to be careful to not overtighten or under-tighten your cartridge to your vape pen.
Why am I getting no smoke from my vape?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
How do you work a dead vape?
0:483:11How to Recharge a Dead Disposable! (Fast and easy, for any brand!)YouTubeStart of suggested clipEnd of suggested clipSo you take the negative end and put it on the negative end of the battery you can tell because thisMoreSo you take the negative end and put it on the negative end of the battery you can tell because this wire is black black is always negative. And this one is just black.
How do I get my vape to work again?
The best way around this problem is to vape with one of your fingers around one of the inlet vents. This increases the airflow pressure and might get the sensors up and working again.
Why is there no smoke when I hit my cart?
Condensation Buildup. The most common cause of a clogged cart is condensation buildup inside the cart's airway. Over time, this condensation can block the mouthpiece, preventing vapor from passing through as you take a hit.
How long does it take for your lungs to heal from vaping?
After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.
How do I get more smoke from my vape?
Try leaning forward slightly and straightening back up as you inhale. Straightening up while inhaling naturally opens up the lungs and allows more vapour to enter them. While exhaling, try pushing out your lower jaw slightly.
How do you unclog a vape coil?
Sometimes, you can simply jam a toothpick or safety pin through the small holes of the mouthpiece to dislodge whatever is clogging it up. This is especially useful if the clog is hard, due to crystallization of the e-liquid or burnt debris that takes on a resinous consistency.
How do you clean a clogged vape?
If the airflow holes appear clogged, attempt to clear them out with a needle, thin paperclip, or other skinny, sterile object. If your cart still keeps clogging, you may need to intermittently clear out the airflow holes with a needle and blow into the mouthpiece of the vape to force out residual oil.
What to do if your vape doesn't turn on?
Still, if your vape doesn’t turn on even after being connected to a power source, there’s one more thing you can try. Check your battery.
Why won't my vape pen turn on?
Won’t Turn On. If your vape pen doesn’t turn on, there could be several factors at play. A poor charger connection, a faulty charger, or a dead battery can all cause your pen to shut down semi-permanently.
What to do when your vape pen makes a gurgling sound?
When your vape pen starts to emit odd noises, the first thing you should do is turn it off and stop using it . The second thing you should do is check the tank for signs of flooding. Gurgling sounds often mean that the tank is too full.
Why is my vape pen not working?
Some of the most common causes behind vape issues are dead batteries, leaky o-rings, and burned coils. Hopefully, this guide helped you diagnose the cause behind your vape pen problems. If you’re still feeling puzzled, it may be helpful to visit a vape store for assistance.
What to do if your vape is leaking?
If your vape uses a latching mechanism , check to ensure that the latch is in excellent condition.
How long after refilling e-liquid can you drag?
If you’re not allowing your e-liquid to permeate the wick, you might be doing yourself a foul-tasting disservice. Try waiting two minutes after refilling before taking a drag. However, the heating coil in your device may be close to burning out, causing your hits to taste like the worst batch of popcorn ever made.
What happens if your e-liquid tank is tight?
Over-tightening your tank can cause premature wear and tear that damages the o-rings.
What to do when your vape is not in use?
Tips for When Your Vape is Not in Use. Try to make it a habit to turn it off your vape pen battery when not in use, this will help preserve battery life and protect it from use by children. Also, always remove the THC vape cartridge from the battery when not using it too, this will help prevent possible damage.
How many times does a vape pen battery turn on?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
What is the dab mode on a vape?
The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale. The first three settings are perfect for those who want to vape without having to press a button, and will vape THC cartridges by simply inhaling.
How long does it take for a vape puff to stop heating?
This means the pen will stop heating the cartridge after a certain amount of time. Most pens will have this occur around 8-seconds.
How long does it take to learn to use a vape pen?
It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one.
Can you vape with a 510 atomizer?
The O.pen has evolved into the 2.0 version with multiple temperature settings, including a dab mode. So, you can enjoy vaping your favorite cannabis extracts with your choice of 510-thread wax atomizer. There are many aspects to consider when purchasing a vape pen battery.
Can you take a puff of THC oil right away?
It's important not to take a huge puff right away, this can lead to unwanted side effects such as lung irritation and paranoia. Instead take some small puffs and inhale for only a few seconds, this will allow the coils to warm up the THC oil.
Opening A Jammed Vape Tank
If you have a “muscular” pair of hands, and can firmly grip the tank, then you’re good to go. Take note that a vape tank is fragile and should be handled with a lot of care. You should only apply pressure to the right part of the vape tank. Besides, numerous tools can help you open a jammed vape tank:
How To Unscrew A Stuck Vape Tank?
This is probably the easiest way of separating a jammed vape tank from your mod. Here, you can use a non-stick piece of cloth, even a chamois cloth will do a good job, grip your vape tank and twiddle it off. Additionally, a pretty old, rough, and stiff cloth has a better “grippiness” as newer ones might be a bit sleeper.
Tank Stuck To Vape Battery
In some cases, the vape may not only be stuck to the mod but also the batteries. This is way riskier because any botched solution would mean replacement with an entirely new tank. When trying to open a vape tank stuck to vape batteries, be extra careful not to destroy the tank and the mod altogether.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
Why is my ohm error so high?
If you’re working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low. Adjusting the resistance will usually clear the error. Or, you may need to tighten the screws properly. Other reasons you may see an ohm error include: The resistance detection component of your device is broken.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
