Resistance Range: 0.05 – 3.0 Ohms (VW) / 0.05-1.5 Ohms (TC) Temperature range: 200 – 600 F / 100 – 315 C 6 colors available: Lava Red, Fantastic Blue, Seaweed Green, Aurora Rainbow, Carbon fiber (Full Black), Carbon fiber (Silver/Black)
...
Pulse 80w by Vandy Vape Specifications.
| Dimensions | 77mm x 50mm x 27mm |
|---|---|
| Colors | White, Purple, Blue, Red, Cyan, Grey, Black |
How to use the Vandy vape pulse 80W Squonk bottle?
Filling up and installing the Vandy Vape Pulse 80W’s squonk bottle is really simple. Just follow these steps: Grab the squonk bottle and unscrew the top off; the top has a mesh pattern on it. Once you’ve done this, put it to one side. Now, grab your E Juice and fill the bottle up.
How many amps does a Vandy vape Coil have?
And that’s a great rating at 34 amps from Vandy Vape. The volt limit I got with a 0.66-ohm coil was 6.311, which is a little over their listed 6 volts. It also shows there is a boost circuit like all single battery mods should have.
What is the pulse V2 squonk mod?
Constructed from durable nylon, the PULSE V2 Squonk Mod is ultra lightweight and has waterproofing of the PCBA, inspired by the Vandy Vape SWELL Box Mod. This allows the mod to be cleaned easily and without worry of jeopardizing the control board.
Where do I connect the Vandy chip to the pulse Vandy?
The top should connect to a pin that is located just under the “Pulse Vandy Chip” logo inside (it’s gold). Again, this is is pretty simple. You have a few modes to play with:
How do you use a V2 pulse?
Using the Pulse V2Five clicks of the fire button to turn on and off.Three clicks to enter mode swap (use up and down to scroll and fire to accept)Use up and down to enter the menu.Four clicks to adjust settings inside of a mode.Press + and fire to lock the mod (locks adjustment buttons only, can still fire)More items...•
Is the Vandy vape pulse V2 regulated?
However, the most interesting feature is that the Pulse V2 can be configured and controlled through your smartphone by using the Vandy app. In addition to these new features, the Pulse V2 also has a new color screen, an updated UI, and a more refined design.
How do I change my Vandy vape settings?
4:5811:37Vandy Vape Swell Kit Breakdown! Find My Mod Feature + ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd if you guys ever need you lock the device what you guys want to do is you guys want to press theMoreAnd if you guys ever need you lock the device what you guys want to do is you guys want to press the fire button and the top button at the same time for now with two seconds. And then should lock the
How do I unlock my Vandy 80w pulse?
Turns ON/OFF: 5 fire-button's clicks. Lock/unlock +/- buttons only (fire button is still active to vape): press both fire and + buttons simultaneously.
What is pulse mode vape?
Pulse mode isn't the most common vape mode, but the Vaporesso Gen S in particular offers the feature to vapers. Essentially, the mode switches the relatively consistent output of most devices by a regular pulsing of output, which occurs every 0.2 seconds as long as you hold down the fire button.
What does shorted mean vape?
A 'Shorted' or 'Check Atomiser' error message means somewhere in the device's connection, the atomiser is causing an electrical short circuit. To resolve the issue, you will need to replace the coil in the tank.
How do you lock the swelling on a Vandy vape?
Using the Vandy Vape Swell5 clicks of the fire button to turn on and off.3 clicks to enter mode swap (use up and down to scroll and fire to accept)Use up and down to enter the menu.4 clicks to adjust settings inside of a mode.+ and fire to lock the mod (locks adjustment buttons only, can still fire)
How do you turn on a Vandy vape mod?
4:467:50The Vandy Vape Pulse BF 80W Unboxing and Quick Product ...YouTubeStart of suggested clipEnd of suggested clipWith a battery installed five clicks of the fire button powers the device on.MoreWith a battery installed five clicks of the fire button powers the device on.
How do you unlock Vandy vape squonk?
Turns ON/OFF: 5 fire-button's clicks. Lock/unlock +/- buttons only (fire button is still active to vape): press both fire and + buttons simultaneously.
What kind of battery does a Vandy vape take?
It can accommodate 21700, 20700, and 18650 batteries and has a 5-80W power range (with several operating modes). It comes with two tanks in the kit. One uses Vandy Vapes VCC mesh coils, and the other is the Vessel RBA tank. The Pulse AIO features a small 0.49inch OLED and USB Type-C charging.
What battery does the Vandy V2 95W Squonk Box use?
Vandy Vape PULSE V2 95W Squonk Box Mod is compatible with a single 21700, 20700 or 18650 battery to keep you going all day long. Charging is done either via an external charger or USB-C.
What is a V2 squonk box?
The Vandy Vape PULSE V2 Squonk Box Mod is an ultimate squonk mod, which aims at providing a premiere combination of ease of use, and a rich flavor ecosystem with a striking chassis. It is capable of 5 to 95W of output and 0.5 to 6.0V of the input voltage. It comes with high performance and provides multiple modes to offer the best vaping experience, such as Power Mode, Bypass Mode, Voltage Mode, TC-NI Mode, TC-SS Mode and TC-TI Mode.
What is Pulse V2?
The Pulse V2 Mod is the latest collaboration between Vandy Vape and Tony B. Compared with the previous Pulse Mods, the Pulse V2 comes with a better bottle, better lines and many improvements. The Pulse V2 culminates the great advantages of previous versions and adopts the same waterproof technology from the Swell Mod. It utilizes a convenient bottom filling design for the bottle, that keeps it locked in place, and directly in line with the 510 to eliminate potential issues with the plumbing inside the mod to transfer juice from one side to the other.
The Pulse 80W Squonk Mod – In-Depth Look At Design
The mod itself is super simple to use and operate: you have a fire button on the side, above the display, and two power rockers directly below the display at the bottom.
Filling and Installing Pulse 80W Squonk Bottle
Filling up and installing the Vandy Vape Pulse 80W’s squonk bottle is really simple. Just follow these steps:
Things To Keep In Mind
BYPASS mode basically turns the Vandy Vape Pulse 80W Squonk Mod into a mech mod, though there is a layer of safety in place.
Anything Else I Need To Know?
Nope, that’s about it. As I said, the Pulse 80W is as about as user-friendly as a mod could be – it comes apart easily and its menu is super simple to work with.
Vandy Vape Pulse 80W Features
You have plenty of stuff to get your teeth stuck into, including temp control vaping and a maximum of 80W in power mode.
Vandy Vape Pulse 80W Performance
Performance is decent enough. It fires perfectly and hits nicely, no complaints in this regard.
Vandy Vape Pulse 80W Battery Life
When it comes to single battery mods, you’re ALWAYS going to be running out of power. This is just the way it is with single cell mods – even if you run them with single coil RDAs.
Vandy Vape Pulse 80W Verdict
This is a tough one to call. On the one hand, I do really like the Vandy Vape Pulse 80W. I dig the way it looks and I really enjoy using it.
What colors does the pulse squonk come in?
The Pulse Squonk comes in tiffany blue/black, white/black, and purple/black. Like many other squonkers, the Pulse Squonk has interchangeable magnetic panels, but the Pulse Squonk has two versus the standard one. That opens it up for more customization and it makes accessing the bottle and battery simpler and more convenient. And that’s what squonking is about: convenience and simplicity.
What is a pulse squonk?
A well-designed and good-looking squonk mod that is affordable and widely available. That’s rare! The Pulse BF is a lightweight bottom-feeder mod powered by a single 18650 or 20700 battery with an 8 mL food grade silicone squonk bottle — which is soft and ideal for easy squonking. The Pulse BF is 77 mm x 50 mm x 27 mm, which means most RDAs will fit on it and look good. Nothing worse than finding a squonker you want that only fits 22 mm RDAs!
What is the latest mod for Vandy Vape?
The Vandy Vape Pulse V2 mod is the latest mod from Vandy Vape and a follow up to the popular Pulse 80W and Pulse X squonk mods released a couple of years ago. Vandy Vape probably don’t need much of an introduction these days as they have made many popular products, with big hits like the Kylin 2 RTA, Jackaroo Mod, and Bonza series of RDAs. They also had some not-so-good ones like the Simple EX kit, the Maze RDA, and the Pyro V2 RDTA, so they seem to be very hit and miss overall.
What is the Vape 2 engraved on the body?
Branding wise they kept it very nice and simple. There is “Vandy Vape” engraved into the body on the backside opposite the screen, and a small “Pulse 2” engraved in the body seen via the large squonk window. The battery door is a standard magnetic side door.
Is Vandy Vape removable?
The panels are removable and replace able via magnets, and as far as I know , Vandy Vape plans to offer them sold separately as they did for their Pulse squonk and Swell mods. So, you get a good amount of customization options there. Branding wise they kept it very nice and simple.
Is Pulse mod IP rated?
It’s very similar to the original Pulse mod but with a new chip and a few design changes. It’s small, lightweight, and water-resistant. It’s not IP rated like the Jackaroo or Aegis line, but is water-resistant enough that you can wash it off if need be and it should survive juice spills.
Does Vandy Vape Pulse V2 have a TCR mode?
You have Power mode (watts) with preheat options, Voltage mode, Bypass mode, and Temp control mode for Ni200, Ti, and SS. No TCR mode but the TCR is adjustable in each of the preset modes. If you use the app you can also set preheats up to do watt curves as well, but the app isn’t very user friendly overall. But it works well enough and we’ll go over that more later. Pretty much all the necessary features that we expect to have on a regulated mod are here.