First you set the unit to 190 °C. Give it about 10 – 15 minutes of time to fully get up to that level. Then you start vaporizing and will notice that your vapor is relatively thin and has a nicer taste. As the vapor becomes thinner, you can put up the temperature 10 degrees at a time and make up for the thinning of the vapor.
Full Answer
How do I set the right vape temperature?
Setting the right vape temperature might seem a bit tricky at first. However once you get the hang of it you’ll see it’s a very easy process. Most people vape between 392°F - 480°F (200 - 250°C), as this gives the best results in terms of vapor quality and flavor.
What is the best temperature to vape weed?
Ideal Temperature For Vaping If we had to choose one temperature as the ideal for vaping, we’d go with 410 ℉. It’s high enough that it vaporizes the most important cannabinoids and terpenes but low enough that it doesn’t completely destroy them in the process. Honestly, the ideal vaping temperature is largely based on personal preference.
How does temperature control work in vape mods?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).
What is low-temperature vaping?
Low-temp vaping is usually set at 374℉. This setting produces a thinner vapor than higher temperatures. But thin vapor doesn’t mean less flavor. In fact, the low-temperature vapor is actually the most flavorful. The flavors and aromas in cannabis vapor come from the terpenoids (terpenes) within.
How do I adjust the heat on my vape?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you're taking your hit.
What temperature should I vape leaves at?
around 392°FAs a healthy super-stoner, the optimal vaping temperature should be at around 392°F(200°C).
What setting should I set my vape to?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
How do I know what temperature to vape?
Generally speaking, lower temps are more conducive to flavor whereas higher temps will give you the strongest psychoactive effects. The boiling point of THC is around 315° F (157° C), so anything lower will produce minimal psychoactive effects.
What temperature is best for vaping herb?
What temperature should you set your vaporizer as a high-class connoisseur? As a cannabis connoisseur, the optimal vaping temperature should be at around 356°F(180°C).
What is the best temp for dry herb vape?
350 - 400FMedium to High Temperature: 350 - 400F (177 - 204C) Degrees This temperature range is the sweet spot for many dry herb vapers.
What is temperature control?
Temperature control is probably the most important innovation in vaping since the first variable voltage/variable wattage devices. It involves setting a maximum temperature for the vape that the coil will not exceed.
How does temperature control work?
Temperature control or TC works by using a notion called the thermal coefficient. The thermal coefficient is a property of certain materials to have their electric resistance increases or decrease depending on the temperature. Therefore by reading the resistance multiple times a second, the mod is able to also precisely estimate coil temperature.
What do I need to start using Temp Control?
To experiment temperature control you need two things: a box mod that’s TC enabled and a coil made from Nickel, Titanium or Stainless Steel.
How to vape in temperature control mode?
Most TC enables box mods have predefined profiles for Nickel (Ni), Titanium (Ti) and Stainless Steel (SS). Knowing the material your coil is built from will help you select the correct profile. Note that it is extremely important to use the appropriate setting for the best results.
Setting the right vaping temperature
Setting the right vape temperature might seem a bit tricky at first. However once you get the hang of it you’ll see it’s a very easy process. Most people vape between 392°F - 480°F (200 - 250°C), as this gives the best results in terms of vapor quality and flavor.
What is vape gear?
Vape gear, like vape pens and counter-top vaporizers, operates at much lower temperatures than your typical open flame. In fact, some vaporizers allow you to dial in exactly the temperature you want. This prevents the cannabinoids you need from literally going up in smoke.
What temperature does a BIC burn?
When you light a match or flick your Bic, the flame produced is, at minimum, 600 ℉. That’s hot! So hot, in fact, that it’s actually destroying a portion of the cannabinoids in your pot. That’s bad! A normal flame can do so much damage because most cannabinoids begin to boil at half (or even a third) of that 600 ℉.
Each vaporizer is different
Most devices allow you to set your own exact temperature, or at least choose from different available presets. If you’re particularly new to the world of vaping weed, you might not know where to start at all! We’re here to give you a deep and comprehensive overview on setting the best temperature for your vaporizer!
Choosing a Vaporizer
There is also the decision of whether you want a convection vaporizer or conduction vaporizer. Conduction & convection devices produce different results with even different flavors, our vaporizer buyers guide goes into this in more depth, but we will go over the principles quickly.
Conduction Vaporizers
Conduction vaporizers like the Davinci IQ2, heat the herbs with direct contact to the heating source. In the case of the IQ2 and a lot of vaporizers, the chamber is made of ceramic, however other materials are also used, like stainless steel, aluminum, even gold.
Convection Vaporizers
Convection vaporizers like the Utillian 722, use hot air to generate the vapor. This air is pre-heating before it hits the chamber as you draw. Convection vaporizers can produce better vapor at lower temperatures and a more even cook in general.
The Best Temperature Settings for Vaping
Vaporization temperatures greatly effect the quality of your vapor by releasing different amounts, and types, of compounds released at different temperatures. For example, at a lower vaping temperature, approximately 190-210 degrees Celsius, you will receive thin & wispy, yet very flavorful vapor.
How do I set temperature on my vaporizer to get the best vapor quality?
We can split the temperature range into 3 different settings to make it simple. Check out our vaping temperature chart below. Each strain will have notably different effects, flavors and odors emitted from them, so it’s a good idea to do a bit of research on the strain you’re about to use.
Low Temperature Vaporization
Terpenes Extracted: Beta-Caryophyllene, Alpha-Pinene, Beta-Pinene, Beta-Myrcene, Delta-3-Carene.
What happens when you increase the heat on a vape?
When you begin to increase the heat on your vaporizer, the effects you feel will also begin to increase. If you still want to function yet feel euphoric and even a bit giddy when you do so, setting your vape to a medium temperature will release various terpenes and higher amounts of THC. Your high will definitely be more intense, but you’ll still be able to completely function.
What does it mean to set a vaporizer to high temperature?
Setting your vaporizer to its highest settings will offer intense feelings of euphoria, sound sleep, intense relaxation, and increased pain relief .
What temperature should I use for vaporizer?
Those who prefer thicker, denser or more visible vapor should consider vaporizing at temperatures between 210 – 235 degrees Celsius on the ideal vaporization spectrum.
What temperature does vaporization take?
For example, at a lower temperature, approximately 190-210 degrees Celsius, you will receive thin & wispy, yet very flavorful vapor. This is very evident in vaporizers like ...
What is the goal of vaporization?
For a little background information, the goal of vaporization is to convert the compounds and essential oils in your botanicals into vapor, or gas form. This is done by heating them to a certain temperature range, to vaporize efficiently and avoid combustion. Some botanicals have several different compounds ...
What temperature does a conduction vaporizer produce?
Conduction vaporizers tend to produce much less vapor at lower temperatures, especially below 200°C or 392°F. They produce more vapor as you increase the temperature. Stirring is also important with these types of vaporizers.
How long does it take to get vapor out of a vaporizer?
Give it about 10 – 15 minutes of time to fully get up to that level. Then you start vaporizing and will notice that your vapor is relatively thin and has a nicer taste. As the vapor becomes thinner, you can put up the temperature 10 degrees at a time and make up for the thinning of the vapor.
What terpenes are extracted from a terpene?
Terpenes Extracted: Beta-Caryophyllene, Alpha-Pinene, Beta-Pinene, Beta-Myrcene, Delta-3-Carene. Time of Day: The lower end of the temperature spectrum is great for those looking to consume there herbs during the day as it produces the lightest effects.
What is a convection vaporizer?
Convection Vaporizers. Convection vaporizers like the Utillian 722, use hot air to generate the vapor. This air is pre-heating before it hits the chamber as you draw. Convection vaporizers can produce better vapor at lower temperatures and a more even cook in general.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
Does NiFe work in TC?
It works well in TC but the user has to make sure it does not get overheated. Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available. Each of these wires has its own temperature coefficient of resistance (TCR).
Choosing Coils
Today, there are a wide range of coils available specifically for temperature control devices. For the most part, you will be working with Ni200 or Stainless Steel (SS316L) coils. Hopefully, you checked your device before you brought it home to ensure you have the correct type of coils on hand.
Selecting Your Mode
The next step in your setup process is to select the temperature control mode you will be using. Depending on your device, this can go several different ways. You may need the assistance of your user manual to figure out the menu for the first time.
Base Settings
In order to ensure that your device is functioning properly and that all temperature control operations are accurate, you first need to lock in your resistance at room temperature. Setting a base line temperature without electricity going through the coil will establish all temperature sensing as your coils heat up.
Getting in the Groove
If you are working with a high powered device like the Vex 150 TC Mod, you have plenty of room to work with, so start slow and take your time. At each interval, stop and take a few hits.
For Next Time
Now that you have set up your temperature control device successfully for the first time, you’ve got a good feel for the way it’s done. It may be slow going at first, but you will get familiar with the menu quickly and soon you will have a good idea of what settings give you the best results so you can narrow down your search for the perfect vape.
